Switches

Cudy GS1005P Unmanaged L2 PoE+ Switch with 5 Gigabit (1Gbps) Ethernet Ports

The Cudy GS1005P unmanaged Layer 2 switch expands your network with four Gigabit Ethernet ports with PoE+ and one Gigabit Ethernet uplink port. It supports powering devices via PoE, such as IP...

The Cudy GS1005P unmanaged Layer 2 switch expands your network with four Gigabit Ethernet ports with PoE+ and one Gigabit Ethernet uplink port. It supports powering devices via PoE, such as IP cameras, access points, IP phones and recorders, with a total PoE budget of up to 60 W and up to 30 W per PoE port. VLAN and Extend modes are selected using a switch,...

See full description See full description
35 17 €
Delivery Thu, 19 Nov - Wed, 25 Nov
14,00 €   shipping cost
Sent from Greece
From T support 4.9 (34)
Greece
20+ pieces
See Networking on the page of T support

Learn more about invoicing

Description

Description

The Cudy GS1005P unmanaged Layer 2 switch expands your network with four Gigabit Ethernet ports with PoE+ and one Gigabit Ethernet uplink port. It supports powering devices via PoE, such as IP cameras, access points, IP phones and recorders, with a total PoE budget of up to 60 W and up to 30 W per PoE port. VLAN and Extend modes are selected using a switch, while Watchdog mode attempts to restart a connected device that has stopped responding.

The metal enclosure can be placed on a desk or mounted on a wall. Transmission reaches up to 100 m in standard mode and up to 250 m on the Extend ports at 10 Mbps.

  • Type: Unmanaged Layer 2 switch
  • Ethernet ports: 5 Gigabit RJ45 ports, including 4 PoE+ ports and 1 uplink port
  • Port speeds: 10/100/1000 Mbps
  • PoE standards: IEEE 802.3af, IEEE 802.3at, Mode A
  • PoE power: Up to 60 W total, up to 30 W per PoE port
  • Modes: Default, VLAN, Extend and Watchdog
  • Layer 2 features: IGMP Snooping, Loop Prevention and Loop Detection
  • Flow control: IEEE 802.3x
  • Ethernet standards: IEEE 802.3, IEEE 802.3u and IEEE 802.3ab
  • Switching capacity: Up to 10 Gbps
  • Forwarding rate: Up to 7.44 Mpps
  • MAC address table: 2048 entries
  • Jumbo frame size: 15 KB
  • Packet buffer: 3 Mbit
  • Transmission distance: Up to 100 m, or up to 250 m at 10 Mbps via the Extend ports
  • LED indicators: Power, Link/ACT for each Ethernet port, PoE status for each PoE port and PoE Max
  • Power supply: External adapter via a DC jack, with a 100–240 V AC, 50 Hz input and a 52 V DC, 1.25 A output
  • Power consumption without PoE: Up to 5 W
  • Operating temperature: 0–40 °C
  • Storage temperature: −40 to 75 °C
  • Dimensions: 119 × 85 × 28 mm
  • Product weight: 253 g
  • Enclosure material: Metal
  • Mounting: Desktop or wall-mounted
  • Package contents: Switch, power adapter and quick installation guide

Manufacturer

See full description

Specifications

Specifications

Network Specifications

Type
Unmanaged
Layer
L2
PoE
Yes
PoE Version
802.3af, 802.3at

Technical Specifications

Ethernet connections
5 Port
Ethernet Speed
1000 Mbps
MAC Address Table
2000 entries
Rack mounting
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

The Cudy GS1005P unmanaged Layer 2 switch expands your network with four Gigabit Ethernet ports with PoE+ and one Gigabit Ethernet uplink port. It supports powering devices via PoE, such as IP cameras, access points, IP phones and recorders, with a total PoE budget of up to 60 W and up to 30 W per PoE port. VLAN and Extend modes are selected using a switch, while Watchdog mode attempts to restart a connected device that has stopped responding.

The metal enclosure can be placed on a desk or mounted on a wall. Transmission reaches up to 100 m in standard mode and up to 250 m on the Extend ports at 10 Mbps.

  • Type: Unmanaged Layer 2 switch
  • Ethernet ports: 5 Gigabit RJ45 ports, including 4 PoE+ ports and 1 uplink port
  • Port speeds: 10/100/1000 Mbps
  • PoE standards: IEEE 802.3af, IEEE 802.3at, Mode A
  • PoE power: Up to 60 W total, up to 30 W per PoE port
  • Modes: Default, VLAN, Extend and Watchdog
  • Layer 2 features: IGMP Snooping, Loop Prevention and Loop Detection
  • Flow control: IEEE 802.3x
  • Ethernet standards: IEEE 802.3, IEEE 802.3u and IEEE 802.3ab
  • Switching capacity: Up to 10 Gbps
  • Forwarding rate: Up to 7.44 Mpps
  • MAC address table: 2048 entries
  • Jumbo frame size: 15 KB
  • Packet buffer: 3 Mbit
  • Transmission distance: Up to 100 m, or up to 250 m at 10 Mbps via the Extend ports
  • LED indicators: Power, Link/ACT for each Ethernet port, PoE status for each PoE port and PoE Max
  • Power supply: External adapter via a DC jack, with a 100–240 V AC, 50 Hz input and a 52 V DC, 1.25 A output
  • Power consumption without PoE: Up to 5 W
  • Operating temperature: 0–40 °C
  • Storage temperature: −40 to 75 °C
  • Dimensions: 119 × 85 × 28 mm
  • Product weight: 253 g
  • Enclosure material: Metal
  • Mounting: Desktop or wall-mounted
  • Package contents: Switch, power adapter and quick installation guide

Manufacturer

Network Specifications

Type
Unmanaged
Layer
L2
PoE
Yes
PoE Version
802.3af, 802.3at

Technical Specifications

Ethernet connections
5 Port
Ethernet Speed
1000 Mbps
MAC Address Table
2000 entries
Rack mounting
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

35,17 €
14,00 €   shipping cost