Turntable Cartridges

Audio Technica Moving Coil Turntable Cartridge AT-ART20 Silver

The Audio-Technica AT-ART20 moving-coil cartridge features a nude stylus with a Special Line Contact tip and a solid boron cantilever with a diameter of 0.28 mm. Its output voltage is 0.55 mV, and the...

The Audio-Technica AT-ART20 moving-coil cartridge features a nude stylus with a Special Line Contact tip and a solid boron cantilever with a diameter of 0.28 mm. Its output voltage is 0.55 mV, and the recommended tracking force ranges from 1.6 to 2.0 g, with a typical value of 1.8 g.

  • Type: Moving coil (MC)
  • Mounting: Standard 1/2"
  • Frequency response: 20–...
See full description See full description
3199 00 €
Delivery Tue, 24 Nov - Mon, 30 Nov
14,00 €   shipping cost
Sent from Greece
From SoundGallery

Learn more about invoicing

Description

Description

The Audio-Technica AT-ART20 moving-coil cartridge features a nude stylus with a Special Line Contact tip and a solid boron cantilever with a diameter of 0.28 mm. Its output voltage is 0.55 mV, and the recommended tracking force ranges from 1.6 to 2.0 g, with a typical value of 1.8 g.

  • Type: Moving coil (MC)
  • Mounting: Standard 1/2"
  • Frequency response: 20–50,000 Hz
  • Channel separation: 30 dB (1 kHz)
  • Vertical tracking angle: 20°
  • Tracking force: 1.6–2.0 g (1.8 g typical)
  • Stylus construction: Nude
  • Stylus shape: Special Line Contact
  • Stylus tip radius: 1.5 × 0.28 mil
  • Cantilever: Solid boron, 0.28 mm diameter
  • Recommended load resistance: ≥ 100 ohms (when connected to a head amplifier)
  • Coil impedance: 12 ohms (1 kHz)
  • DC resistance: 12 ohms
  • Coil inductance: 25 μH (1 kHz)
  • Output voltage: 0.55 mV (1 kHz, 5 cm/sec.)
  • Static compliance: 23 × 10⁻⁶ cm/dyne
  • Dynamic compliance: 13 × 10⁻⁶ cm/dyne (100 Hz)
  • Cartridge weight: 9 g
  • Dimensions: 17.3 × 16.8 × 26.6 mm (H × W × D)
  • Threaded holes: 2 × M2.6
  • Package contents: Non-magnetic screwdriver, brush, 2 washers, M2.6 cartridge mounting screws (2 × 5 mm, 2 × 8 mm, 2 × 10 mm, and 2 × 12 mm), stylus guard

Manufacturer

See full description

Specifications

Specifications

Type
Moving Coil
Packaging
Piece
Mounting Type
Standard 1/2"

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

The Audio-Technica AT-ART20 moving-coil cartridge features a nude stylus with a Special Line Contact tip and a solid boron cantilever with a diameter of 0.28 mm. Its output voltage is 0.55 mV, and the recommended tracking force ranges from 1.6 to 2.0 g, with a typical value of 1.8 g.

  • Type: Moving coil (MC)
  • Mounting: Standard 1/2"
  • Frequency response: 20–50,000 Hz
  • Channel separation: 30 dB (1 kHz)
  • Vertical tracking angle: 20°
  • Tracking force: 1.6–2.0 g (1.8 g typical)
  • Stylus construction: Nude
  • Stylus shape: Special Line Contact
  • Stylus tip radius: 1.5 × 0.28 mil
  • Cantilever: Solid boron, 0.28 mm diameter
  • Recommended load resistance: ≥ 100 ohms (when connected to a head amplifier)
  • Coil impedance: 12 ohms (1 kHz)
  • DC resistance: 12 ohms
  • Coil inductance: 25 μH (1 kHz)
  • Output voltage: 0.55 mV (1 kHz, 5 cm/sec.)
  • Static compliance: 23 × 10⁻⁶ cm/dyne
  • Dynamic compliance: 13 × 10⁻⁶ cm/dyne (100 Hz)
  • Cartridge weight: 9 g
  • Dimensions: 17.3 × 16.8 × 26.6 mm (H × W × D)
  • Threaded holes: 2 × M2.6
  • Package contents: Non-magnetic screwdriver, brush, 2 washers, M2.6 cartridge mounting screws (2 × 5 mm, 2 × 8 mm, 2 × 10 mm, and 2 × 12 mm), stylus guard

Manufacturer

Type
Moving Coil
Packaging
Piece
Mounting Type
Standard 1/2"

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

3.199,00 €
14,00 €   shipping cost