Skroutz.mt

Telwin Supermig 450i Welding Machine Inverter MMA with Maximum Welding Current 450A and Duty Cycle 40%
Welding Machines

Telwin Supermig 450i Welding Machine Inverter MMA with Maximum Welding Current 450A and Duty Cycle 40%

SUPERMIG 450I Electrode Welding Inverter MMA

Features:

  • Voltage: 400V, three-phase
  • Network frequency: 50/60 Hz
  • Current range: 20-400 A
  • Maximum current: 400A @ 40%
  • Direct current (DC): 300A
  • Max....

SUPERMIG 450I Electrode Welding Inverter MMA

Features:

  • Voltage: 400V, three-phase
  • Network frequency: 50/60 Hz
  • Current range: 20-400 A
  • Maximum current: 400A @ 40%
  • Direct current (DC): 300A
  • Max. voltage (no load): 82V
  • Max. absorbed current: 31A
  • Absorbed current at 60%: 21A
  • Max. absorbed power: 16kW
  • Absorbed power at 60%: 10.8kW
  • Efficiency: 89%
  • Power factor:...
See full description See full description

  • Welding Current

    450

    Suitable for professional use on thick metals, such as steel or cast iron constructions.

  • Duty Cycle

    The Duty Cycle is the portion of a ten-minute period that a welding machine can operate continuously at maximum Amperes before it needs to stop and cool down.

    2.

    For example, a welding machine with a maximum Amperage of 200 A and a Duty Cycle of 30% can operate continuously at 200 A for 3 minutes before it needs to stop.

  • Power Supply Voltage

    400

    It is the supply voltage that the machine requires from the electrical grid.
  • See all
Review the product
Product report

Description

Description

SUPERMIG 450I Electrode Welding Inverter MMA

Features:

  • Voltage: 400V, three-phase
  • Network frequency: 50/60 Hz
  • Current range: 20-400 A
  • Maximum current: 400A @ 40%
  • Direct current (DC): 300A
  • Max. voltage (no load): 82V
  • Max. absorbed current: 31A
  • Absorbed current at 60%: 21A
  • Max. absorbed power: 16kW
  • Absorbed power at 60%: 10.8kW
  • Efficiency: 89%
  • Power factor: 0.74
  • Used electrodes in DC: 1.6 - 6 mm
  • Protection degree: IP23
  • Dimensions: 71x30x55 cm
  • Weight: 24 Kg

Description:

The ultimate machine with pulses on the Telwin Supermig 405i electrode. Specially designed cooling system for the machine to protect electronic parts. Perfect welding for every type of electrode with 40% less energy consumption compared to non-pulsed machines. Electrode welding is possible in both continuous (DC) and pulsed current modes. The pulsed function (MMA Pulse) is recommended for basic electrodes in positional welding. It guarantees less spatter, rework, and higher welding quality. The GOUGING function is available on the Telwin Supermig 450i and can be used for cutting with carbon electrodes.

  • VRD for protection in wet environments.
  • Digital screen for clear setting selection.
  • DC and pulsed current (MMA PULSE) operation mode.
  • Low power consumption.
  • LCD DISPLAY: Modern electronic screen.
  • Automatic network voltage selection.
  • HOT START IGNITION: Additional electric power.
  • ANTI–STICK: Stops welding current.
  • ARC– FORCE: Automatic current calibration during welding.
  • VRD: Voltage reduction system.
  • TIG – LIFT: Arc start by contact.
  • GOUGING function with carbon electrodes.
  • Thermal protection and voltage fluctuation protection.
  • Generator protection.

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Dimensions

Type
MMA

Type

MMA

Creates thick and strong bonds without the need for external gas supply, making it ideal for out-of-lab welding.
Welding Current (max)
450 A

Welding Current (max): 450


Suitable for professional use on thick metals, such as steel or cast iron constructions.
Operation Cycle (max Ampere)
40 %

Operation Cycle (max Ampere)

The Duty Cycle is the portion of a ten-minute period that a welding machine can operate continuously at maximum Amperes before it needs to stop and cool down.

2.

For example, a welding machine with a maximum Amperage of 200 A and a Duty Cycle of 30% can operate continuously at 200 A for 3 minutes before it needs to stop.
Supply Voltage
400 V

Supply Voltage: 400


It is the supply voltage that the machine requires from the electrical grid.
Maximum Electrode Diameter
6 mm

Maximum Electrode Diameter: 6


The maximum electrode thickness that the machine can support, depending on the maximum current it can provide.
Weight
24000 gr

Additional Features

Inverter
Yes

Inverter


New technology welding. Very good in terms of performance, durability, and weight, but with a high cost of repair in case of damage. They have automation for better and safer work. If connected to a generator, it is recommended to choose one with 8kVA or more.
IGBT
No
VRD
Yes

VRD


It is a voltage reduction device used in welding machines to improve user safety.
with Voltage Stabilizer
No
for Generator with AVR
No

Features

Hot Start
Yes

Hot Start


Temporarily increases the current intensity at the moment of welding initiation.
Anti Stick
No
Arc Force
No
2T Operation
No
4T Mode
No
Spot Function
No
Pulsed
Yes

Pulsed


Instead of remaining constant during welding, the current increases and decreases in pulses at specified time intervals.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

SUPERMIG 450I Electrode Welding Inverter MMA

Features:

  • Voltage: 400V, three-phase
  • Network frequency: 50/60 Hz
  • Current range: 20-400 A
  • Maximum current: 400A @ 40%
  • Direct current (DC): 300A
  • Max. voltage (no load): 82V
  • Max. absorbed current: 31A
  • Absorbed current at 60%: 21A
  • Max. absorbed power: 16kW
  • Absorbed power at 60%: 10.8kW
  • Efficiency: 89%
  • Power factor: 0.74
  • Used electrodes in DC: 1.6 - 6 mm
  • Protection degree: IP23
  • Dimensions: 71x30x55 cm
  • Weight: 24 Kg

Description:

The ultimate machine with pulses on the Telwin Supermig 405i electrode. Specially designed cooling system for the machine to protect electronic parts. Perfect welding for every type of electrode with 40% less energy consumption compared to non-pulsed machines. Electrode welding is possible in both continuous (DC) and pulsed current modes. The pulsed function (MMA Pulse) is recommended for basic electrodes in positional welding. It guarantees less spatter, rework, and higher welding quality. The GOUGING function is available on the Telwin Supermig 450i and can be used for cutting with carbon electrodes.

  • VRD for protection in wet environments.
  • Digital screen for clear setting selection.
  • DC and pulsed current (MMA PULSE) operation mode.
  • Low power consumption.
  • LCD DISPLAY: Modern electronic screen.
  • Automatic network voltage selection.
  • HOT START IGNITION: Additional electric power.
  • ANTI–STICK: Stops welding current.
  • ARC– FORCE: Automatic current calibration during welding.
  • VRD: Voltage reduction system.
  • TIG – LIFT: Arc start by contact.
  • GOUGING function with carbon electrodes.
  • Thermal protection and voltage fluctuation protection.
  • Generator protection.

Manufacturer

Manufacturer Details

Warnings & Safety Information

Dimensions

Type
MMA

Type

MMA

Creates thick and strong bonds without the need for external gas supply, making it ideal for out-of-lab welding.
Welding Current (max)
450 A

Welding Current (max): 450


Suitable for professional use on thick metals, such as steel or cast iron constructions.
Operation Cycle (max Ampere)
40 %

Operation Cycle (max Ampere)

The Duty Cycle is the portion of a ten-minute period that a welding machine can operate continuously at maximum Amperes before it needs to stop and cool down.

2.

For example, a welding machine with a maximum Amperage of 200 A and a Duty Cycle of 30% can operate continuously at 200 A for 3 minutes before it needs to stop.
Supply Voltage
400 V

Supply Voltage: 400


It is the supply voltage that the machine requires from the electrical grid.
Maximum Electrode Diameter
6 mm

Maximum Electrode Diameter: 6


The maximum electrode thickness that the machine can support, depending on the maximum current it can provide.
Weight
24000 gr

Additional Features

Inverter
Yes

Inverter


New technology welding. Very good in terms of performance, durability, and weight, but with a high cost of repair in case of damage. They have automation for better and safer work. If connected to a generator, it is recommended to choose one with 8kVA or more.
IGBT
No
VRD
Yes

VRD


It is a voltage reduction device used in welding machines to improve user safety.
with Voltage Stabilizer
No
for Generator with AVR
No

Features

Hot Start
Yes

Hot Start


Temporarily increases the current intensity at the moment of welding initiation.
Anti Stick
No
Arc Force
No
2T Operation
No
4T Mode
No
Spot Function
No
Pulsed
Yes

Pulsed


Instead of remaining constant during welding, the current increases and decreases in pulses at specified time intervals.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

2.743,00 €
80,00 €   shipping cost