It is applied to kitchen and bathroom wall tiles, as well as surfaces of wood, plaster, cement, concrete, brick, plasterboards, steel, galvanized iron, aluminum, copper, brass, glass, and PVC. Suitable for interior and exterior use.

• Finish: Satin
• Color: White
• Coverage: 10-15 m²/L (depending on the absorbency of the surface)
• Suggested thickness: 100-150 microns wet (60-90 microns dry), applicable in 1 or 2 coats
• Drying time: 30-60 minutes to touch at 20°C
• Recoat: 6 hours (plastic), 12 hours (varnish), 24 hours (2-component)
• Thinning / Tool cleaning: Water
• Packaging: 750 ml
• Application tools: Brush, roller, spray gun

General instructions: Stir thoroughly until the product is homogenized. Application temperature should be between 5°C and 35°C, and not be applied on hot surfaces or surfaces exposed to sunlight. It should be applied in well-ventilated areas and environmental humidity should be below 80%.

New surfaces: The surface should be clean, free of dust, grease, and other substances. For improved adhesion, you can lightly sand with sandpaper. When applying on tiles, remove dust and test before starting. On wooden surfaces, remove dirt and resins and apply the product. On metal surfaces, lightly sand with sandpaper and clean thoroughly.

Application: For maximum performance on tiles and surfaces of wood, iron, galvanized, aluminum, and PVC, apply two coats of the product. Follow the preparation rules of new surfaces, remove foreign materials, and clean the surface.

• Thinning percentage with airless spray: 0-10%
• Thinning percentage with air mix spray: 0-10%
• Thinning percentage with spray gun: 0-10%
• Thinning percentage with low-pressure turbo: 0-10%