Skroutz.mt

Rupes HSS73/BETA Battery Powered Eccentric Sander 18V 1x2.5Ah with Speed Control and with Suction System 100005
Sanders

Rupes HSS73/BETA Battery Powered Eccentric Sander 18V 1x2.5Ah with Speed Control and with Suction System 100005

HSS73/BETA Battery-Powered Palm Orbital Sander 18V (2x2.5Ah)

Features:

  • Power: 45W
  • Voltage: 18V
  • Speed: 7000-11000 rpm
  • Plate: Delta
  • Orbit: 2mm
  • Weight: 1.0 Kg

Description:

New generation RUPES HSS73...

HSS73/BETA Battery-Powered Palm Orbital Sander 18V (2x2.5Ah)

Features:

  • Power: 45W
  • Voltage: 18V
  • Speed: 7000-11000 rpm
  • Plate: Delta
  • Orbit: 2mm
  • Weight: 1.0 Kg

Description:

New generation RUPES HSS73 battery-powered sander with 18 Volt power supply that allows you to sand for up to 45 minutes without interruption. Very lightweight with zero vibration and...

See full description See full description
  • Number of Batteries 1
  • Ah 2.5 Ah

  • Speed Setting

    Ability to control the rotation speed of the tool.

    1

  • Eccentricity

    Refers to the distance traveled by the rotation of the base/disc from its center (small eccentricity for finishing, large for fast removal).

    2

    Very fine sanding, sensitive materials, finishing

  • Oscillation Range

    Refers to the amount/length of the back-and-forth or up-and-down movement of the disc or base (greater range removes more material, smaller range provides a more precise finish).

    2

    Very fine sanding, sensitive materials, finishing.

  • RPM (Revolutions Per Minute)

    • High speeds → fast material removal
    • Low speeds → finer, more controlled finish
  • Weight (Net) 1000 gr
  • See all
Review the product
Product report

Description

Description

HSS73/BETA Battery-Powered Palm Orbital Sander 18V (2x2.5Ah)

Features:

  • Power: 45W
  • Voltage: 18V
  • Speed: 7000-11000 rpm
  • Plate: Delta
  • Orbit: 2mm
  • Weight: 1.0 Kg

Description:

New generation RUPES HSS73 battery-powered sander with 18 Volt power supply that allows you to sand for up to 45 minutes without interruption. Very lightweight with zero vibration and perfect balance for long hours of work. 20-minute fast charger for uninterrupted professional work. The sander is equipped with a Delta-type Hookit plate.

Included:

  • 2 x Lithium Batteries 9HB180LT 18V 2.5Ah
  • Fast charger with base 9HC180LT
  • T-LOC storage case 9.CASE III
  • Standalone absorption filter 80.436/C

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Specifications

Type
Eccentric Sander

Type

Eccentric Sander

For smoothing curved surfaces with a circular smoothing base.
Power Source
Battery

Power Source

The method of supplying power to the tool.
Eccentricity
2 mm

Eccentricity: 2

Refers to the distance traveled by the rotation of the base/disc from its center (small eccentricity for finishing, large for fast removal).


Very fine sanding, sensitive materials, finishing
Oscillation Range
2 mm

Oscillation Range: 2

Refers to the amount/length of the back-and-forth or up-and-down movement of the disc or base (greater range removes more material, smaller range provides a more precise finish).


Very fine sanding, sensitive materials, finishing.
Net Weight
1000 gr
Palm Sander
Yes

Palm Sander

Ergonomic sander that can be easily held by hand, without the need for special support or handles.

Battery Specifications

Number of Batteries
1
Volt
18 V
Ah
2.5 Ah

Features & Functions

Dust Suction System
Yes

Dust Suction System

Used for collecting residues during the operation of the tool.
Speed Setting
Yes

Speed Setting

Ability to control the rotation speed of the tool.
Turns
11000 rpm

Turns

  • High speeds → fast material removal
  • Low speeds → finer, more controlled finish
Brushless
No

Brushless

Motor without brushes, offering greater autonomy and longer lifespan.
Water Supply
No
Soft Start
No

Soft Start

Controls the increase in motor speed when the tool is activated. Instead of starting abruptly at maximum speed, the sander gradually increases its speed over 1–2 seconds.
Brake
No

Brake

Immediately stops the disc when the tool is switched off, for safety and easy abrasive change.
Connection with Vacuum
No

Sandpaper / Belt Specifications

Velcro
No

Velcro

The abrasive pads can be attached with Velcro (hook-and-loop fastener).

Accessories

Carrying Case
Without
Handle Included
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

HSS73/BETA Battery-Powered Palm Orbital Sander 18V (2x2.5Ah)

Features:

  • Power: 45W
  • Voltage: 18V
  • Speed: 7000-11000 rpm
  • Plate: Delta
  • Orbit: 2mm
  • Weight: 1.0 Kg

Description:

New generation RUPES HSS73 battery-powered sander with 18 Volt power supply that allows you to sand for up to 45 minutes without interruption. Very lightweight with zero vibration and perfect balance for long hours of work. 20-minute fast charger for uninterrupted professional work. The sander is equipped with a Delta-type Hookit plate.

Included:

  • 2 x Lithium Batteries 9HB180LT 18V 2.5Ah
  • Fast charger with base 9HC180LT
  • T-LOC storage case 9.CASE III
  • Standalone absorption filter 80.436/C

Manufacturer

Manufacturer Details

Warnings & Safety Information

Specifications

Type
Eccentric Sander

Type

Eccentric Sander

For smoothing curved surfaces with a circular smoothing base.
Power Source
Battery

Power Source

The method of supplying power to the tool.
Eccentricity
2 mm

Eccentricity: 2

Refers to the distance traveled by the rotation of the base/disc from its center (small eccentricity for finishing, large for fast removal).


Very fine sanding, sensitive materials, finishing
Oscillation Range
2 mm

Oscillation Range: 2

Refers to the amount/length of the back-and-forth or up-and-down movement of the disc or base (greater range removes more material, smaller range provides a more precise finish).


Very fine sanding, sensitive materials, finishing.
Net Weight
1000 gr
Palm Sander
Yes

Palm Sander

Ergonomic sander that can be easily held by hand, without the need for special support or handles.

Battery Specifications

Number of Batteries
1
Volt
18 V
Ah
2.5 Ah

Features & Functions

Dust Suction System
Yes

Dust Suction System

Used for collecting residues during the operation of the tool.
Speed Setting
Yes

Speed Setting

Ability to control the rotation speed of the tool.
Turns
11000 rpm

Turns

  • High speeds → fast material removal
  • Low speeds → finer, more controlled finish
Brushless
No

Brushless

Motor without brushes, offering greater autonomy and longer lifespan.
Water Supply
No
Soft Start
No

Soft Start

Controls the increase in motor speed when the tool is activated. Instead of starting abruptly at maximum speed, the sander gradually increases its speed over 1–2 seconds.
Brake
No

Brake

Immediately stops the disc when the tool is switched off, for safety and easy abrasive change.
Connection with Vacuum
No

Sandpaper / Belt Specifications

Velcro
No

Velcro

The abrasive pads can be attached with Velcro (hook-and-loop fastener).

Accessories

Carrying Case
Without
Handle Included
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

615,00 €
14,00 €   shipping cost