Access Control Cards

Sonoff Access Control Card 2pcs White

Sonoff access control cards use NTAG215 NFC chips to activate one smart scene per card via a compatible smartphone. With the eWeLink app, tapping the phone against the card activates the selected...

Sonoff access control cards use NTAG215 NFC chips to activate one smart scene per card via a compatible smartphone. With the eWeLink app, tapping the phone against the card activates the selected scene. The chip has 540 bytes of memory and can be read and written more than 10,000 times.

The cards are made of white PVC plastic with a glossy surface and...

See Description & Specifications See Description & Specifications
1 93 €
Delivery by Tue, 17 Nov
14,00 €   shipping cost
Sent from Greece
From Top Electronics 4.9 (40)

Learn more about invoicing

Reviews (12)

Reviews

  1. 5
  2. 1
  3. 1
  4. 3
  5. 2
Review this product

What do users say? AI-generated summary

Opinions are mixed: when recognized, the cards perform actions via NFC and can be used with compatible phones. However, several users report slow or unreliable reading, sometimes even after repeatedly holding the phone close.

Reviews by our members

  • zakis72
    1
    0 out of 2 members found this review helpful

    In iPhone, reading is very slow. While with a separate application they are read immediately, through the Shortcut (which most people will do) they are read extremely slowly. To the point where you have to touch the phone on them, leave it for 3-4 seconds, and when you remove it, the action is activated after another 1-2 seconds!

    I haven't tried other tags, I will do it, but my experience with them is the worst.

    Translated from Greek ·
    Did you find this review helpful?
  • Giannis_D84
    3
    6 out of 7 members found this review helpful

    Verified purchase

    I started with the sonoff NFC TAGs, which allow you to create MONO "scenes" through eWeLink. However, this limits you because it only recognizes sonoff smart devices. So, I downloaded the NFC Tools app and through the URL Routine Trigger skill and Bitly link, you can do whatever you want through Alexa. It loses 2 stars because it is a bit slow in transmitting the command when you approach the phone. It only works with mobile phones that support NFC.

    Translated from Greek ·
    Did you find this review helpful?
  • Verified purchase

    If you know where the NFC reader of your phone is, it works just fine even with a case.

    Translated from Greek ·
    Did you find this review helpful?
  • It doesn't work well. You have to swipe it many times for it to be accepted

    Translated from Greek ·
    Did you find this review helpful?
  • 1
    0 out of 2 members found this review helpful

    Verified purchase

    It does not work properly

    Translated from Greek ·
    Did you find this review helpful?
  • 4
    3 out of 3 members found this review helpful

    Verified purchase

    The NFC of the phone is a bit difficult to find. If found, it does the job

    Translated from Greek ·
    Did you find this review helpful?
  • 2
    1 out of 1 members found this review helpful

    Verified purchase

    It does not capture NFC well

    Translated from Greek ·
    Did you find this review helpful?
  • Verified purchase

  • Verified purchase

  • Verified purchase

  • Verified purchase

  • In iPhone, reading is very slow. While with a separate application they are read immediately, through the Shortcut (which most people will do) they are read extremely slowly. To the point where you have to touch the phone on them, leave it for 3-4 seconds, and when you remove it, the action is activated after another 1-2 seconds!

    I haven't tried other tags, I will do it, but my experience with them is the worst.

    Translated from Greek ·
    0
  • I started with the sonoff NFC TAGs, which allow you to create MONO "scenes" through eWeLink. However, this limits you because it only recognizes sonoff smart devices. So, I downloaded the NFC Tools app and through the URL Routine Trigger skill and Bitly link, you can do whatever you want through Alexa. It loses 2 stars because it is a bit slow in transmitting the command when you approach the phone. It only works with mobile phones that support NFC.

    Translated from Greek ·
    6
  • If you know where the NFC reader of your phone is, it works just fine even with a case.

    Translated from Greek ·
    0
  • It doesn't work well. You have to swipe it many times for it to be accepted

    Translated from Greek ·
    0
  • It does not work properly

    Translated from Greek ·
    0
  • See all

Description & Specifications

Sonoff access control cards use NTAG215 NFC chips to activate one smart scene per card via a compatible smartphone. With the eWeLink app, tapping the phone against the card activates the selected scene. The chip has 540 bytes of memory and can be read and written more than 10,000 times.

The cards are made of white PVC plastic with a glossy surface and waterproof protection. The built-in anti-metal layer allows them to be used on metal surfaces as well.

  • Type: NFC card
  • Quantity: 2 pieces
  • Color: White
  • Chip: NTAG215
  • Memory: 540 bytes
  • Read/write endurance: More than 10,000 times
  • Compatibility: NFC-enabled devices, iOS 13 or later, Android devices with NFC technology
  • App: eWeLink, version 4.19.0 or later
  • Material: PVC
  • Surface: Glossy
  • Protection: Waterproof
  • Anti-metal layer: Built-in

Manufacturer

Type
Card
Colour
White
Quantity
2 pcs

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

Reviews (12)

  1. 5
  2. 1
  3. 1
  4. 3
  5. 2
Review this product

What do users say? AI-generated summary

Opinions are mixed: when recognized, the cards perform actions via NFC and can be used with compatible phones. However, several users report slow or unreliable reading, sometimes even after repeatedly holding the phone close.

Reviews by our members

  • zakis72
    1
    0 out of 2 members found this review helpful

    In iPhone, reading is very slow. While with a separate application they are read immediately, through the Shortcut (which most people will do) they are read extremely slowly. To the point where you have to touch the phone on them, leave it for 3-4 seconds, and when you remove it, the action is activated after another 1-2 seconds!

    I haven't tried other tags, I will do it, but my experience with them is the worst.

    Translated from Greek ·
    Did you find this review helpful?
  • Giannis_D84
    3
    6 out of 7 members found this review helpful

    Verified purchase

    I started with the sonoff NFC TAGs, which allow you to create MONO "scenes" through eWeLink. However, this limits you because it only recognizes sonoff smart devices. So, I downloaded the NFC Tools app and through the URL Routine Trigger skill and Bitly link, you can do whatever you want through Alexa. It loses 2 stars because it is a bit slow in transmitting the command when you approach the phone. It only works with mobile phones that support NFC.

    Translated from Greek ·
    Did you find this review helpful?
  • Verified purchase

    If you know where the NFC reader of your phone is, it works just fine even with a case.

    Translated from Greek ·
    Did you find this review helpful?
  • It doesn't work well. You have to swipe it many times for it to be accepted

    Translated from Greek ·
    Did you find this review helpful?
  • 1
    0 out of 2 members found this review helpful

    Verified purchase

    It does not work properly

    Translated from Greek ·
    Did you find this review helpful?
  • 4
    3 out of 3 members found this review helpful

    Verified purchase

    The NFC of the phone is a bit difficult to find. If found, it does the job

    Translated from Greek ·
    Did you find this review helpful?
  • 2
    1 out of 1 members found this review helpful

    Verified purchase

    It does not capture NFC well

    Translated from Greek ·
    Did you find this review helpful?
  • Verified purchase

  • Verified purchase

  • Verified purchase

  • Verified purchase

  • In iPhone, reading is very slow. While with a separate application they are read immediately, through the Shortcut (which most people will do) they are read extremely slowly. To the point where you have to touch the phone on them, leave it for 3-4 seconds, and when you remove it, the action is activated after another 1-2 seconds!

    I haven't tried other tags, I will do it, but my experience with them is the worst.

    Translated from Greek ·
    0
  • I started with the sonoff NFC TAGs, which allow you to create MONO "scenes" through eWeLink. However, this limits you because it only recognizes sonoff smart devices. So, I downloaded the NFC Tools app and through the URL Routine Trigger skill and Bitly link, you can do whatever you want through Alexa. It loses 2 stars because it is a bit slow in transmitting the command when you approach the phone. It only works with mobile phones that support NFC.

    Translated from Greek ·
    6
  • If you know where the NFC reader of your phone is, it works just fine even with a case.

    Translated from Greek ·
    0
  • It doesn't work well. You have to swipe it many times for it to be accepted

    Translated from Greek ·
    0
  • It does not work properly

    Translated from Greek ·
    0
  • See all
1,93 €
14,00 €   shipping cost