Wireless alarm with 99 zones and landline phone notification.

Operation Settings:

• Silent alarm # 0 0 # No warning siren.
• Audible alarm # 0 1 # Siren for warning.
• Set phone numbers # (1 ~ 5); ...; # .1-5 phone groups, "1-5" are the regular phone numbers; "..." means the phone numbers.
• Set emergency # 6; ...; #. The same method as above, pressing the main unit alarm button and the remote alarm button will call this call group.
• Delete phone numbers # (1 ~ 6) #. Delete all selected phone numbers.
• Set alarm delay # 7 ?? # recommends delayed warning time in the delay operation zone, in seconds. Here, "??" represents the number of seconds within the range between 0 and 99.
• Siren sounding time # 9 ?? #. The siren sounds without human intervention after the warning, here the range of "??" is between 0 and 30 minutes.
• The alarm defense zone message 0-9. Directly press 0-9 to check the last 10 alarm events and the alarm defense zone screen (0 means the latest event).
• Defense zone setup status # 8 ?? (1 ~ 7) #. Here, "??" stands for the serial number from 0 to 99. (1 ~ 7) defines the setting mode of the selected defense zone. 1 = common defense area, 2 = intelligent defense zone, 3 = emergency defense zone, 7 = repeat activated zone. For example, press # 822 # then you can set defense zone 2 as intelligent area.
• Note: When you enter "99", this means the entire wireless defense zone will operate according to this mode.
• Emergency defense zone: Once activated, it will immediately notify the police, suitable for gas leaks, smoke response, safe access, and other special cases.
• Defense Alarm Delay: When the "defense" zone is triggered and alarm is needed, the main unit can delay the alarm (the specific delay time is determined by the "Alarm delay setting"); additionally, the warning behavior can be canceled within the delayed time.
• Delete defense zones: Delete selected defense zones (only for wireless defense zones). NOTE: # 8 99 6 # will delete all wireless defense zones.
• Repeat to activate the defense zone: When the detector is triggered once, the system will not alarm immediately. Only when reactivated within 5-30 seconds after the first trigger will the system alarm. Choosing common or intelligent defense zones has no effect. Modes 4,5,7 let you select intelligent or common defense area by choosing any of modes 4,5,7 in the same area.
• The zone has been set to emergency mode in another mode, if you want to set the zone as normal zone please do not use patterns, then set the mode.
• Enter code *code*: The factory code is: 0000 which can be changed to any desired four-digit code.
• Delete all remote controls * 02 *.
• Delete all detectors in the defense zone # 8996 #.
• Use remote control to turn on and off the siren sound * 21/0 * siren sounds for on, while buzzer for off.
• Restore factory settings * 8 code * .The system will restore factory settings (delete phone numbers, voice alarm, increased sounds, cancel alarms, delay defense settings,
• Delete defense zones: Means delete selected defense zones (only for wireless defense areas). Note when entering # 8 99 6 #, all wireless defense zones will be deleted.
• Use remote control to turn on and off the siren sound * 21/0 * siren sounds to indicate activation while the buzzer sounds for deactivation.

Package includes:

• 1 x alarm system
• 1 x motion sensor
• 1 x door sensor
• 1 x siren for the alarm
• 2 x remote controls
• 1 x power supply