Satin luxury paint for interior and exterior use. It offers excellent coverage and whiteness. It provides a velvety surface and spreads perfectly, leaving a satin finish that is resistant to frequent washing and stains.

TECHNICAL CHARACTERISTICS:

• YIELD: 14-20m2 / Lt per coat
• DILUTION: First coat: 15% water. Second coat: 5-10% water
• DRYING: 1 - 2 hours depending on application conditions

SURFACE PREPARATION:

• To ensure proper adhesion of the product, the surface to be painted must be cleaned of dust, grease, oils, peeling old paint, rust, mold, or moisture residues.
• For new or porous surfaces, first apply the corresponding recommended primer of the product (Step primer, Life dur water, Step plaster).
• Apply the product in 2 coats (after stirring well) which should be spaced 1 - 2 hours apart.
• The product achieves all its mechanical strengths after 20 - 30 days.

APPLICATION CONDITIONS:

• Avoid applying the product at temperatures below 6°C and above 40°C and when the relative humidity is above 80%. Adverse conditions during application can alter the final properties of the paint.

APPLICATION TOOLS:

• Brush
• Roller
• Spray gun

During work, keep the tools "wet" inside the container. Drain the product well from the tools and clean them immediately with warm water and soap. If the product dries, it can be removed only with strong detergents. Do not dispose of wash liquids into the groundwater.

WARNING: Wear protective gloves / protective clothing / eye / face protection. In case of contact with eyes, rinse carefully with plenty of water for several minutes. If contact lenses are present, remove them if easy. Continue rinsing.