The PLA from Copymaster3D is a high-quality filament suitable for many 3D printing applications.

The PLA is made from polylactic acid and is fully biodegradable, with no toxic fumes. This means it can be used indoors without worry, even with children or pets nearby.

Copymaster3D PLA has very low shrinkage, ensuring accurate prints and a low risk of warping. While a heated bed is not necessary, it is recommended for better adhesion of the prints.

For even better adhesion, the use of PrimaFIX is recommended, which also makes the removal of the print easier once it cools down.

• Diameter: 1.75 mm
• Weight: 1.00 kg
• Length: 335 m
• Color: dark blue
• Recommended printing temperature: 190 - 220 ºC
• Recommended bed temperature: 0 - 45 ºC
• Recommended print speed: 40 - 150 mm/s
• Specific gravity: 1.24 g/cm3
• Heat distortion temperature: 50 °C
• Tensile strength: 45 MPa
• Elongation at break: 5.3 %
• Bending strength: 63.64 %
• Bend modulus: 2157
• Impact resistance: 17 KJ/m2