Skroutz.mt

Pedrollo Electric Surface Water Pump with Automatic Suction 1.25hp Single-Phase
Surface Water Pumps

Pedrollo Electric Surface Water Pump with Automatic Suction 1.25hp Single-Phase Code: 108880

The Pedrollo FUTURE JETm 2A-ST surface pump has a self-priming capacity of up to 9 m and is installed horizontally. Its casing and impeller are made of AISI 304 stainless steel.

  • Pump type: JET
  • Power...

The Pedrollo FUTURE JETm 2A-ST surface pump has a self-priming capacity of up to 9 m and is installed horizontally. Its casing and impeller are made of AISI 304 stainless steel.

  • Pump type: JET
  • Power supply: Electric
  • Horsepower: 1.25 hp
  • Power: 900 W
  • Voltage: 220 V, single-phase
  • Current draw: 6.60 A
  • Installation: Horizontal
  • Self-priming: Yes
  • Suction lift: 9 m...
See full description See full description

Top specs

  • Power Supply

    Electric

    Ideal for continuous and demanding operation (e.g. for a flooded field and/or basement) 2. More economical consumption than gasoline-powered pumps 3. More environmentally friendly

  • Self-Priming

    The engine is automatically activated when the water in the tank falls below the lower limit. Similarly, it is deactivated when the tank is filled.
  • Voltage Single-Phase

  • Flow rate

    The amount of water that the pump can provide. For example, 6m³/h is equivalent to 100 liters/minute.

  • Manometric Height

    This is the distance from the suction point to the maximum height that the water reaches (For example, for a height of 10 meters of water, a pressure of 1 bar is required).
  • See all

Learn more about invoicing
Product report

Description

Description

The Pedrollo FUTURE JETm 2A-ST surface pump has a self-priming capacity of up to 9 m and is installed horizontally. Its casing and impeller are made of AISI 304 stainless steel.

  • Pump type: JET
  • Power supply: Electric
  • Horsepower: 1.25 hp
  • Power: 900 W
  • Voltage: 220 V, single-phase
  • Current draw: 6.60 A
  • Installation: Horizontal
  • Self-priming: Yes
  • Suction lift: 9 m
  • Maximum flow rate: 13 m³/h
  • Maximum head: 58 m
  • Maximum operating pressure: 6 bar
  • Inlet port: 1"
  • Outlet port: 1"
  • Casing and impeller material: AISI 304 stainless steel
  • Ambient temperature: Up to 40 °C
  • Liquid temperature: From -10 °C to 40 °C
  • Length: 39.30 cm
  • Width: 20.80 cm
  • Height: 21.70 cm

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Number
108880

Main Specifications

Power Source
Electric

Power Source

Electric
Ideal for continuous and demanding operation (e.g. for a flooded field and/or basement) 2. More economical consumption than gasoline-powered pumps 3. More environmentally friendly
Placement
Horizontal
Automatic Suction
Yes

Automatic Suction

The engine is automatically activated when the water in the tank falls below the lower limit. Similarly, it is deactivated when the tank is filled.
Centrifugal
No

Centrifugal

Pumps with impellers that enhance water flow.
Firefighting
No
Power Type
Single-Phase
Set
No

Technical Specifications

Horsepower
1.25 hp
Power
900 W
Flow Rate
13 m³/h

Flow Rate

The amount of water that the pump can provide. For example, 6m³/h is equivalent to 100 liters/minute.
Manometric Head
58 m

Manometric Head

This is the distance from the suction point to the maximum height that the water reaches (For example, for a height of 10 meters of water, a pressure of 1 bar is required).

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Reviews (1)

Reviews

5.0
1
5.0
Review this product
  1. 1
  2. 4 stars
    0
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1 star
    0
Review this product

Description & Specifications

The Pedrollo FUTURE JETm 2A-ST surface pump has a self-priming capacity of up to 9 m and is installed horizontally. Its casing and impeller are made of AISI 304 stainless steel.

  • Pump type: JET
  • Power supply: Electric
  • Horsepower: 1.25 hp
  • Power: 900 W
  • Voltage: 220 V, single-phase
  • Current draw: 6.60 A
  • Installation: Horizontal
  • Self-priming: Yes
  • Suction lift: 9 m
  • Maximum flow rate: 13 m³/h
  • Maximum head: 58 m
  • Maximum operating pressure: 6 bar
  • Inlet port: 1"
  • Outlet port: 1"
  • Casing and impeller material: AISI 304 stainless steel
  • Ambient temperature: Up to 40 °C
  • Liquid temperature: From -10 °C to 40 °C
  • Length: 39.30 cm
  • Width: 20.80 cm
  • Height: 21.70 cm

Manufacturer

Manufacturer Details

Warnings & Safety Information
Product Number
108880

Main Specifications

Power Source
Electric

Power Source

Electric
Ideal for continuous and demanding operation (e.g. for a flooded field and/or basement) 2. More economical consumption than gasoline-powered pumps 3. More environmentally friendly
Placement
Horizontal
Automatic Suction
Yes

Automatic Suction

The engine is automatically activated when the water in the tank falls below the lower limit. Similarly, it is deactivated when the tank is filled.
Centrifugal
No

Centrifugal

Pumps with impellers that enhance water flow.
Firefighting
No
Power Type
Single-Phase
Set
No

Technical Specifications

Horsepower
1.25 hp
Power
900 W
Flow Rate
13 m³/h

Flow Rate

The amount of water that the pump can provide. For example, 6m³/h is equivalent to 100 liters/minute.
Manometric Head
58 m

Manometric Head

This is the distance from the suction point to the maximum height that the water reaches (For example, for a height of 10 meters of water, a pressure of 1 bar is required).

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

Reviews (1)

5.0
1
5.0
Review this product
  1. 1
  2. 4 stars
    0
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1 star
    0
Review this product
207,00 €
53,00 €   shipping cost