Skroutz.mt

Helix Welding Machine Inverter MAG / MIG / TIG / MMA / FCAW with Maximum Welding Current 200A and Duty Cycle 60%
Welding Machines

Helix Welding Machine Inverter MAG / MIG / TIG / MMA / FCAW with Maximum Welding Current 200A and Duty Cycle 60%

Key features:

  • Maximum Power: 180A
  • Efficiency: 60% 7KVa
  • Gas Wire: 0.8mm, 1.0mm
  • Spool: 5Kg
  • Dimensions (LxWxH): 52x23x32 cm
See full description

  • Welding Current

    200

    Suitable for professional use on thick metals, such as steel or cast iron constructions.

  • Duty Cycle

    The Duty Cycle is the portion of a ten-minute period that a welding machine can operate continuously at maximum Amperes before it needs to stop and cool down.

    2.

    For example, a welding machine with a maximum Amperage of 200 A and a Duty Cycle of 30% can operate continuously at 200 A for 3 minutes before it needs to stop.

  • Power

    7

    Affects the power consumption of the machine and determines if it can be supported by the electrical network you are using.
  • See all
423 80 €
Delivery by Thu, 02 Jul
35,00 €   shipping cost
Sent from Greece
From e-tserpelis 4.9 (51)
4.9 (51 reviews)
Greece
6 pieces
See Tools on the page of e-tserpelis
Product report

Description

Description

Capabilities

Inverter welding MMA / MIG / TIG from the manufacturer Helix, where inverter technology enhances the machine's performance and durability while contributing to its weight reduction. The MMA electrode method creates thick and strong welds without the need for an external gas supply, making it ideal for welding outside the workshop. The MIG method requires the wire to have a special coating (flux) or needs to be connected to an external gas cylinder (e.g., argon, CO2). The MAG method creates welds with a gas supply, making it ideal for indoor welding. The TIG method is suitable for slow welding on aluminum and stainless steel that requires detailed work and does not create splashes. It can operate continuously for 6 minutes at 200A before needing to stop to cool down. Therefore, due to the maximum Amperes it supports, it melts thicker wires more easily and creates thicker welds with fewer passes.

Technical specifications

  • Maximum Power: 180A
  • Efficiency: 60% 7 KVa
  • Wire with Gas: 0.8mm, 1.0mm
  • FLUX Wire without Gas: 0.8mm, 0.9mm, 1.0mm
  • Spool: 5.0 Kg
  • Dimensions (LxWxH): 52x23x32 cm

Includes

  • MIG, TIG, MMA Clamp Type B
  • Grounding Body Type B
  • Auto-Darkening Mask
  • Brush
  • Chipping Hammer
  • 3-meter cables 25mm, with 35-50 sockets

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Dimensions

Type
MAG, MIG, TIG, MMA, FCAW

Type

MIG

The easiest welding method even for a beginner. 2. If the wire to be used does not have a special coating (flux), it should be connected to an external gas cylinder (e.g. argon, CO2).

TIG

Slow welding for detailed work on aluminum and stainless steel, mainly. Requires experience and connection to an external gas cylinder. Does not create "spatters".

MMA

Creates thick and strong bonds without the need for external gas supply, making it ideal for out-of-lab welding.

FCAW
It uses flux-coated wire, which releases gases as it burns, creating a protective zone around the molten metal.
Welding Current (max)
200 A

Welding Current (max): 200


Suitable for professional use on thick metals, such as steel or cast iron constructions.
Operation Cycle (max Ampere)
60 %

Operation Cycle (max Ampere)

The Duty Cycle is the portion of a ten-minute period that a welding machine can operate continuously at maximum Amperes before it needs to stop and cool down.

2.

For example, a welding machine with a maximum Amperage of 200 A and a Duty Cycle of 30% can operate continuously at 200 A for 3 minutes before it needs to stop.
Power
7 kVA

Power: 7


Affects the power consumption of the machine and determines if it can be supported by the electrical network you are using.
Maximum Wire Diameter
1 mm

Maximum Wire Diameter: 1


The maximum wire thickness that the machine's wire feed can support, depending on the current intensity it can provide.

Additional Features

Inverter
Yes

Inverter


New technology welding. Very good in terms of performance, durability, and weight, but with a high cost of repair in case of damage. They have automation for better and safer work. If connected to a generator, it is recommended to choose one with 8kVA or more.
IGBT
Yes

IGBT


Allows the conversion of direct current (DC) voltage to alternating current (AC) or the output of direct current at a higher or lower intensity.
VRD
Yes

VRD


It is a voltage reduction device used in welding machines to improve user safety.
with Voltage Stabilizer
Yes

with Voltage Stabilizer


It detects fluctuations in the supply voltage and corrects them in real-time, resulting in a stable output voltage, improving the machine's lifespan and the quality of the welding.
for Generator with AVR
No

Features

Hot Start
No
Anti Stick
No
Arc Force
No
2T Operation
Yes

2T Operation


Press and hold the torch button to start welding. Once you release it, the welding stops.
4T Mode
Yes

4T Mode


Press the button once to start welding and release it. You do not need to keep the button pressed.
Spot Function
No
Pulsed
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Reviews (1)

Reviews

5.0
1
5.0
Review this product
  1. 1
  2. 4 stars
    0
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1 star
    0
Review this product

Description & Specifications

Capabilities

Inverter welding MMA / MIG / TIG from the manufacturer Helix, where inverter technology enhances the machine's performance and durability while contributing to its weight reduction. The MMA electrode method creates thick and strong welds without the need for an external gas supply, making it ideal for welding outside the workshop. The MIG method requires the wire to have a special coating (flux) or needs to be connected to an external gas cylinder (e.g., argon, CO2). The MAG method creates welds with a gas supply, making it ideal for indoor welding. The TIG method is suitable for slow welding on aluminum and stainless steel that requires detailed work and does not create splashes. It can operate continuously for 6 minutes at 200A before needing to stop to cool down. Therefore, due to the maximum Amperes it supports, it melts thicker wires more easily and creates thicker welds with fewer passes.

Technical specifications

  • Maximum Power: 180A
  • Efficiency: 60% 7 KVa
  • Wire with Gas: 0.8mm, 1.0mm
  • FLUX Wire without Gas: 0.8mm, 0.9mm, 1.0mm
  • Spool: 5.0 Kg
  • Dimensions (LxWxH): 52x23x32 cm

Includes

  • MIG, TIG, MMA Clamp Type B
  • Grounding Body Type B
  • Auto-Darkening Mask
  • Brush
  • Chipping Hammer
  • 3-meter cables 25mm, with 35-50 sockets

Manufacturer

Manufacturer Details

Warnings & Safety Information

Dimensions

Type
MAG, MIG, TIG, MMA, FCAW

Type

MIG

The easiest welding method even for a beginner. 2. If the wire to be used does not have a special coating (flux), it should be connected to an external gas cylinder (e.g. argon, CO2).

TIG

Slow welding for detailed work on aluminum and stainless steel, mainly. Requires experience and connection to an external gas cylinder. Does not create "spatters".

MMA

Creates thick and strong bonds without the need for external gas supply, making it ideal for out-of-lab welding.

FCAW
It uses flux-coated wire, which releases gases as it burns, creating a protective zone around the molten metal.
Welding Current (max)
200 A

Welding Current (max): 200


Suitable for professional use on thick metals, such as steel or cast iron constructions.
Operation Cycle (max Ampere)
60 %

Operation Cycle (max Ampere)

The Duty Cycle is the portion of a ten-minute period that a welding machine can operate continuously at maximum Amperes before it needs to stop and cool down.

2.

For example, a welding machine with a maximum Amperage of 200 A and a Duty Cycle of 30% can operate continuously at 200 A for 3 minutes before it needs to stop.
Power
7 kVA

Power: 7


Affects the power consumption of the machine and determines if it can be supported by the electrical network you are using.
Maximum Wire Diameter
1 mm

Maximum Wire Diameter: 1


The maximum wire thickness that the machine's wire feed can support, depending on the current intensity it can provide.

Additional Features

Inverter
Yes

Inverter


New technology welding. Very good in terms of performance, durability, and weight, but with a high cost of repair in case of damage. They have automation for better and safer work. If connected to a generator, it is recommended to choose one with 8kVA or more.
IGBT
Yes

IGBT


Allows the conversion of direct current (DC) voltage to alternating current (AC) or the output of direct current at a higher or lower intensity.
VRD
Yes

VRD


It is a voltage reduction device used in welding machines to improve user safety.
with Voltage Stabilizer
Yes

with Voltage Stabilizer


It detects fluctuations in the supply voltage and corrects them in real-time, resulting in a stable output voltage, improving the machine's lifespan and the quality of the welding.
for Generator with AVR
No

Features

Hot Start
No
Anti Stick
No
Arc Force
No
2T Operation
Yes

2T Operation


Press and hold the torch button to start welding. Once you release it, the welding stops.
4T Mode
Yes

4T Mode


Press the button once to start welding and release it. You do not need to keep the button pressed.
Spot Function
No
Pulsed
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

Reviews (1)

5.0
1
5.0
Review this product
  1. 1
  2. 4 stars
    0
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1 star
    0
Review this product
423,80 €
35,00 €   shipping cost