Skroutz.mt

Yato YT-22357 Guide Drill
Power Tool Accessories

Yato YT-22357 Guide Drill

External cleaner - a cutter designed for rounding off metal, wooden elements, etc. The body is metal, conical funnel with a hexagonal shaft for mounting on a drill.

  • Total height: 49 mm.
  • Inner...

External cleaner - a cutter designed for rounding off metal, wooden elements, etc. The body is metal, conical funnel with a hexagonal shaft for mounting on a drill.

  • Total height: 49 mm.
  • Inner diameter: bottom 19 mm, top 3 mm.
  • Depth: approximately 12 mm.
  • Three steel cutting blades approximately 1.5 mm wide, made of YG8 carbide.
  • Suitable for: stainless steel,...
See full description See full description
Product report

Description

Description

External cleaner - a cutter designed for rounding off metal, wooden elements, etc. The body is metal, conical funnel with a hexagonal shaft for mounting on a drill.

  • Total height: 49 mm.
  • Inner diameter: bottom 19 mm, top 3 mm.
  • Depth: approximately 12 mm.
  • Three steel cutting blades approximately 1.5 mm wide, made of YG8 carbide.
  • Suitable for: stainless steel, hardened steel, copper, brass, aluminum, fiberglass, wood, and plastic.
  • Important application: smoothing the edges of threads on bolts or rods.

The speed of the drill should be adjusted according to the material being processed.

The main application is rounding off the threaded edges on screws or rods, removing burrs from the outer edges of pipes, spikes, or pins. Insert the hexagonal pin into the drill chuck and slide the workpiece over the work item. During rotation, the inserts placed inside will cut the material and smooth its surfaces.

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Components Type
Drill Parts
Product Type
Guide
Socket / Connection
Hexagonal 1/4" / Hex
Set
No
Pieces
1 pcs

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Reviews (6)

Reviews

3.5
6
3.5
Review this product
  1. 2
  2. 2
  3. 3 stars
    0
  4. 1
  5. 1
Review this product
  • Effectiveness
  • Quality
  • Value for money
  • Lefteris_Vita
    4
    Lefteris_Vita

    I've used it a little so far.

    Initially, it's good that it has a large cutting range, from about 3 to 19mm according to the description.

    To smooth a 12mm rod, I had to put it in the vise and apply pressure with both hands on the drill. So it's not sharp enough to cut very easily. Holding the rod with one hand and the drill with the other is not possible, as a lot of force is required.

    On a 6mm rod, however, it worked very quickly.

    The fact that the cutting edges are not so sharp may indicate that they will last longer. In the description it says steel, but further down it says carbide, which is not the same thing. I don't know which is true, but I hope it's carbide so they don't wear out quickly. And if it really is carbide, which is a brittle material, then it's good that they're not super sharp because they would break by the second use.

    In conclusion, the tool is fine and does its job, you just need to have the rod secured and apply pressure for larger diameters. If it lasts a long time before wearing out, I'll consider the purchase very good

    Translated from Greek ·
    Did you find this review helpful?
  • 5
    georgios_pefanis8782

    Verified purchase

    very good, value for money!

    Translated from Greek ·
    Did you find this review helpful?
  • 1
    Michalis_Aretakis

    Verified purchase

    I expected it to be bigger and weaker

    Translated from Greek ·
    • Value for money
    • Construction quality
    Did you find this review helpful?
  • 4
    vasilis verras

    Verified purchase

  • 2
    Giorgos_Dounias4872

    Verified purchase

    • Effectiveness
    • Quality
    • Value for money
  • 5
    Stlaz

    Verified purchase

  • Lefteris_Vita
    4
    Lefteris_Vita

    I've used it a little so far.

    Initially, it's good that it has a large cutting range, from about 3 to 19mm according to the description.

    To smooth a 12mm rod, I had to put it in the vise and apply pressure with both hands on the drill. So it's not sharp enough to cut very easily. Holding the rod with one hand and the drill with the other is not possible, as a lot of force is required.

    On a 6mm rod, however, it worked very quickly.

    The fact that the cutting edges are not so sharp may indicate that they will last longer. In the description it says steel, but further down it says carbide, which is not the same thing. I don't know which is true, but I hope it's carbide so they don't wear out quickly. And if it really is carbide, which is a brittle material, then it's good that they're not super sharp because they would break by the second use.

    In conclusion, the tool is fine and does its job, you just need to have the rod secured and apply pressure for larger diameters. If it lasts a long time before wearing out, I'll consider the purchase very good

    Translated from Greek ·
    0
  • 5
    georgios_pefanis8782

    very good, value for money!

    Translated from Greek ·
    0
  • 1
    Michalis_Aretakis

    I expected it to be bigger and weaker

    Translated from Greek ·
    0
  • 4
    vasilis verras

    0
  • 2
    Giorgos_Dounias4872

    0
  • See all

Description & Specifications

External cleaner - a cutter designed for rounding off metal, wooden elements, etc. The body is metal, conical funnel with a hexagonal shaft for mounting on a drill.

  • Total height: 49 mm.
  • Inner diameter: bottom 19 mm, top 3 mm.
  • Depth: approximately 12 mm.
  • Three steel cutting blades approximately 1.5 mm wide, made of YG8 carbide.
  • Suitable for: stainless steel, hardened steel, copper, brass, aluminum, fiberglass, wood, and plastic.
  • Important application: smoothing the edges of threads on bolts or rods.

The speed of the drill should be adjusted according to the material being processed.

The main application is rounding off the threaded edges on screws or rods, removing burrs from the outer edges of pipes, spikes, or pins. Insert the hexagonal pin into the drill chuck and slide the workpiece over the work item. During rotation, the inserts placed inside will cut the material and smooth its surfaces.

Manufacturer

Manufacturer Details

Warnings & Safety Information
Components Type
Drill Parts
Product Type
Guide
Socket / Connection
Hexagonal 1/4" / Hex
Set
No
Pieces
1 pcs

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

Reviews (6)

3.5
6
3.5
Review this product
  1. 2
  2. 2
  3. 3 stars
    0
  4. 1
  5. 1
Review this product
  • Effectiveness
  • Quality
  • Value for money
  • Lefteris_Vita
    4
    Lefteris_Vita

    I've used it a little so far.

    Initially, it's good that it has a large cutting range, from about 3 to 19mm according to the description.

    To smooth a 12mm rod, I had to put it in the vise and apply pressure with both hands on the drill. So it's not sharp enough to cut very easily. Holding the rod with one hand and the drill with the other is not possible, as a lot of force is required.

    On a 6mm rod, however, it worked very quickly.

    The fact that the cutting edges are not so sharp may indicate that they will last longer. In the description it says steel, but further down it says carbide, which is not the same thing. I don't know which is true, but I hope it's carbide so they don't wear out quickly. And if it really is carbide, which is a brittle material, then it's good that they're not super sharp because they would break by the second use.

    In conclusion, the tool is fine and does its job, you just need to have the rod secured and apply pressure for larger diameters. If it lasts a long time before wearing out, I'll consider the purchase very good

    Translated from Greek ·
    Did you find this review helpful?
  • 5
    georgios_pefanis8782

    Verified purchase

    very good, value for money!

    Translated from Greek ·
    Did you find this review helpful?
  • 1
    Michalis_Aretakis

    Verified purchase

    I expected it to be bigger and weaker

    Translated from Greek ·
    • Value for money
    • Construction quality
    Did you find this review helpful?
  • 4
    vasilis verras

    Verified purchase

  • 2
    Giorgos_Dounias4872

    Verified purchase

    • Effectiveness
    • Quality
    • Value for money
  • 5
    Stlaz

    Verified purchase

  • Lefteris_Vita
    4
    Lefteris_Vita

    I've used it a little so far.

    Initially, it's good that it has a large cutting range, from about 3 to 19mm according to the description.

    To smooth a 12mm rod, I had to put it in the vise and apply pressure with both hands on the drill. So it's not sharp enough to cut very easily. Holding the rod with one hand and the drill with the other is not possible, as a lot of force is required.

    On a 6mm rod, however, it worked very quickly.

    The fact that the cutting edges are not so sharp may indicate that they will last longer. In the description it says steel, but further down it says carbide, which is not the same thing. I don't know which is true, but I hope it's carbide so they don't wear out quickly. And if it really is carbide, which is a brittle material, then it's good that they're not super sharp because they would break by the second use.

    In conclusion, the tool is fine and does its job, you just need to have the rod secured and apply pressure for larger diameters. If it lasts a long time before wearing out, I'll consider the purchase very good

    Translated from Greek ·
    0
  • 5
    georgios_pefanis8782

    very good, value for money!

    Translated from Greek ·
    0
  • 1
    Michalis_Aretakis

    I expected it to be bigger and weaker

    Translated from Greek ·
    0
  • 4
    vasilis verras

    0
  • 2
    Giorgos_Dounias4872

    0
  • See all
8,00 €
14,00 €   shipping cost