Skroutz.mt

Yato Solo Battery Powered Eccentric Sander 125mm Battery 18V with Speed Control and with Suction System YT-82753
Sanders

Yato Solo Battery Powered Eccentric Sander 125mm Battery 18V with Speed Control and with Suction System YT-82753

PROFESSIONAL CORDLESS ORBITAL SANDER 18V 125MM

The YATO YT-82753 is ideal for use on paints, varnishes, putties, wood, metal.

Features:

  • Speed: 0-12,000 RPM
  • Voltage: 18V
  • Noise level: 84.7 3.0 dB(A)
  • ...

PROFESSIONAL CORDLESS ORBITAL SANDER 18V 125MM

The YATO YT-82753 is ideal for use on paints, varnishes, putties, wood, metal.

Features:

  • Speed: 0-12,000 RPM
  • Voltage: 18V
  • Noise level: 84.7 3.0 dB(A)
  • Electronically controlled rotation speed
  • Vibration: 7.0 1.5 m/s²
  • Dust extraction system
  • Abrasive disc diameter: 125 mm
  • Base diameter for disc mounting: 125 mm
  • ...
See full description See full description
  • Number of Batteries 0

  • Speed Setting

    Ability to control the rotation speed of the tool.

    1

  • Eccentricity

    Refers to the distance traveled by the rotation of the base/disc from its center (small eccentricity for finishing, large for fast removal).

    2

    Very fine sanding, sensitive materials, finishing

  • RPM (Revolutions Per Minute)

    • High speeds → fast material removal
    • Low speeds → finer, more controlled finish

  • Velcro

    The abrasive pads can be attached with Velcro (hook-and-loop fastener).

    1
  • Weight (Net) 1180 gr
  • See all
Review the product
Product report

Description

Description

PROFESSIONAL CORDLESS ORBITAL SANDER 18V 125MM

The YATO YT-82753 is ideal for use on paints, varnishes, putties, wood, metal.

Features:

  • Speed: 0-12,000 RPM
  • Voltage: 18V
  • Noise level: 84.7 ± 3.0 dB(A)
  • Electronically controlled rotation speed
  • Vibration: 7.0 ± 1.5 m/s²
  • Dust extraction system
  • Abrasive disc diameter: 125 mm
  • Base diameter for disc mounting: 125 mm
  • Eccentricity: 2mm
  • User-friendly and practical design
  • 4-stage battery indicator
  • 18 V system - operates on a common battery
  • Battery cell overheating protection

This product is sold SOLO, it does NOT include batteries or a charger.

Available spare batteries: 2Ah (YT-82842), 3Ah (YT-82843), 4Ah (YT-82844), and 6Ah (YT-82845) and with chargers YT-82849 and YT-82848.

18 V SYSTEM: The 18 V system is a series of YATO cordless tools powered by the same durable battery. You can purchase the devices in a set with a battery and fast charger or solo, which is the perfect solution when expanding your tool kit.

The power of the battery offers you freedom and greater comfort at work. Additionally, YATO battery tools are durable, user-friendly, and perfectly balanced.

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Specifications

Type
Eccentric Sander

Type

Eccentric Sander

For smoothing curved surfaces with a circular smoothing base.
Power Source
Battery

Power Source

The method of supplying power to the tool.
Eccentricity
2 mm

Eccentricity: 2

Refers to the distance traveled by the rotation of the base/disc from its center (small eccentricity for finishing, large for fast removal).


Very fine sanding, sensitive materials, finishing
Vibration (m/s²)
7
Net Weight
1180 gr
Palm Sander
No

Palm Sander

Ergonomic sander that can be easily held by hand, without the need for special support or handles.

Battery Specifications

Number of Batteries
0
Volt
18 V
Τύπος Συμβατής Μπαταρίας
-

Features & Functions

Dust Suction System
Yes

Dust Suction System

Used for collecting residues during the operation of the tool.
Speed Setting
Yes

Speed Setting

Ability to control the rotation speed of the tool.
Turns
12000 rpm

Turns

  • High speeds → fast material removal
  • Low speeds → finer, more controlled finish
Noise
3 dB
Brushless
No

Brushless

Motor without brushes, offering greater autonomy and longer lifespan.
Water Supply
No
Soft Start
No

Soft Start

Controls the increase in motor speed when the tool is activated. Instead of starting abruptly at maximum speed, the sander gradually increases its speed over 1–2 seconds.
Brake
No

Brake

Immediately stops the disc when the tool is switched off, for safety and easy abrasive change.
Connection with Vacuum
Yes

Sandpaper / Belt Specifications

Diameter
125 mm
Velcro
Yes

Velcro

The abrasive pads can be attached with Velcro (hook-and-loop fastener).

Accessories

Carrying Case
Without
Handle Included
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

PROFESSIONAL CORDLESS ORBITAL SANDER 18V 125MM

The YATO YT-82753 is ideal for use on paints, varnishes, putties, wood, metal.

Features:

  • Speed: 0-12,000 RPM
  • Voltage: 18V
  • Noise level: 84.7 ± 3.0 dB(A)
  • Electronically controlled rotation speed
  • Vibration: 7.0 ± 1.5 m/s²
  • Dust extraction system
  • Abrasive disc diameter: 125 mm
  • Base diameter for disc mounting: 125 mm
  • Eccentricity: 2mm
  • User-friendly and practical design
  • 4-stage battery indicator
  • 18 V system - operates on a common battery
  • Battery cell overheating protection

This product is sold SOLO, it does NOT include batteries or a charger.

Available spare batteries: 2Ah (YT-82842), 3Ah (YT-82843), 4Ah (YT-82844), and 6Ah (YT-82845) and with chargers YT-82849 and YT-82848.

18 V SYSTEM: The 18 V system is a series of YATO cordless tools powered by the same durable battery. You can purchase the devices in a set with a battery and fast charger or solo, which is the perfect solution when expanding your tool kit.

The power of the battery offers you freedom and greater comfort at work. Additionally, YATO battery tools are durable, user-friendly, and perfectly balanced.

Manufacturer

Manufacturer Details

Warnings & Safety Information

Specifications

Type
Eccentric Sander

Type

Eccentric Sander

For smoothing curved surfaces with a circular smoothing base.
Power Source
Battery

Power Source

The method of supplying power to the tool.
Eccentricity
2 mm

Eccentricity: 2

Refers to the distance traveled by the rotation of the base/disc from its center (small eccentricity for finishing, large for fast removal).


Very fine sanding, sensitive materials, finishing
Vibration (m/s²)
7
Net Weight
1180 gr
Palm Sander
No

Palm Sander

Ergonomic sander that can be easily held by hand, without the need for special support or handles.

Battery Specifications

Number of Batteries
0
Volt
18 V
Τύπος Συμβατής Μπαταρίας
-

Features & Functions

Dust Suction System
Yes

Dust Suction System

Used for collecting residues during the operation of the tool.
Speed Setting
Yes

Speed Setting

Ability to control the rotation speed of the tool.
Turns
12000 rpm

Turns

  • High speeds → fast material removal
  • Low speeds → finer, more controlled finish
Noise
3 dB
Brushless
No

Brushless

Motor without brushes, offering greater autonomy and longer lifespan.
Water Supply
No
Soft Start
No

Soft Start

Controls the increase in motor speed when the tool is activated. Instead of starting abruptly at maximum speed, the sander gradually increases its speed over 1–2 seconds.
Brake
No

Brake

Immediately stops the disc when the tool is switched off, for safety and easy abrasive change.
Connection with Vacuum
Yes

Sandpaper / Belt Specifications

Diameter
125 mm
Velcro
Yes

Velcro

The abrasive pads can be attached with Velcro (hook-and-loop fastener).

Accessories

Carrying Case
Without
Handle Included
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

45,36 €
14,00 €   shipping cost