Skroutz.mt

Elica Missy PB IX/A/90 Chimney Vent Hood 90cm Inox
Vent Hoods

Elica Missy PB IX/A/90 Chimney Vent Hood 90cm Inox Code: PRF0091763B

Key features:

  • Metal filters
  • 3 Operating Levels
  • Noise Level 49-68 dB
  • Lighting: 2×3 W LED

The Elica vent hood with a suction power of 395 m³/h, which can adequately cover spaces up to 13m².

See full description

  • Item

    Chimney

    The chimney-style hoods cover the air duct with a decorative element that resembles a chimney.

  • Noise Level

    Shows how much noise the extractor makes when it is in operation.

    2. The fewer the db, the quieter it is. An extractor with 58db or less is considered quite quiet.

  • Energy class

    The energy class categorizes devices into groups according to the current they consume, ranging from the lowest D to the highest A+++.

    2. The higher the energy class, the lower the electricity consumption.

    3. For example, for a 12 sq.m. kitchen with an extractor fan that has an absorption power of about 340m³/h and frequent weekly use, the difference in annual cost from D to A is about €6, and from A to A+++ the difference is almost negligible.

  • Extraction Power (Max)

    Displays the maximum absorption capacity. To calculate the required absorbency, knowledge of the dimensions of the kitchen space is necessary.


    For example, for a 7 sqm kitchen, the required absorption power is approximately 200m³/h, for 12 sqm it is approximately 340m³/h, and for 15 sqm it is 420m³/h and above.

  • Filter Type

    Charcoal (optional)

    Carbon filters are used when range hoods operate without a duct connection and the air is recirculated into the room.


    They are not washable and it is recommended to replace them every 4 months.


    Their use reduces the efficiency of the range hood by about 30%.

    Metal

    They are used in most extractors. Metallic filters are easy to remove and clean, either in the dishwasher or by hand. They do not require frequent replacement.
  • See all
The product is not available for shipping to the selected country.
Product report

Description

Description

  • Type Wall-mounted Chimney Hood
  • Maximum Extraction Capacity IEC 395 m3/h
  • Energy Consumption Class D
  • Operating Levels 3
  • Color Inox
  • Annual Energy Consumption 42 kWh
  • Motor 1
  • Width 90 cm
  • Filter Type Metal filters that are dishwasher washable
  • Ability to Change Filters to Active Carbon CFC0141497
  • Noise Level 49-68 db
  • Outlet Diameter 150 mm
  • Lighting: 2x3 W LED
  • Dimensions in cm (HxWxD): 73.9 (106.1) x 89.8 x 45 cm

Features

  • Maximum Absorption IEC 395 m3/h
  • Energy Consumption D
  • Operating Levels 3
  • Color Inox
  • Annual Energy Consumption 42 kWh
  • Motor 1
  • Width 90 cm
  • Filter Type Metal filters that are dishwasher safe
  • Option to Change Filters to Activated Carbon CFC0141497
  • Noise Level 49-68 db
  • Outlet Diameter 150 mm
  • Lighting: 2×3 W LED
  • Dimensions in cm (HxWxD): 73.9 (106.1) x 89.8 x 45 cm

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Number
PRF0091763B

Product Details

Type
Chimney

Type

Chimney
The chimney-style hoods cover the air duct with a decorative element that resembles a chimney.
Retro
No
Grease Filter Material
Charcoal (optional), Metal

Grease Filter Material

Charcoal (optional)

Carbon filters are used when range hoods operate without a duct connection and the air is recirculated into the room.


They are not washable and it is recommended to replace them every 4 months.


Their use reduces the efficiency of the range hood by about 30%.

Metal

They are used in most extractors. Metallic filters are easy to remove and clean, either in the dishwasher or by hand. They do not require frequent replacement.
Extraction Mode
Extraction

Extraction Mode

Concerns the way in which the extractor absorbs air.

Extraction

The air that the extractor pulls is expelled from the house through a pipe, cleaning the atmosphere in the kitchen.
Dual Motor
No
Type of Control
Switches
Timer Function
No
Filter Cleaning Indicator
No
Washable Filter
Yes
Colour
Inox

Technical Features

Extraction Power (Max)
395 m³/h

Extraction Power (Max)

Displays the maximum absorption capacity. To calculate the required absorbency, knowledge of the dimensions of the kitchen space is necessary.


For example, for a 7 sqm kitchen, the required absorption power is approximately 200m³/h, for 12 sqm it is approximately 340m³/h, and for 15 sqm it is 420m³/h and above.

Dimensions

Width
90 cm
Length
-

Energy Label

Energy Class
D

Energy Class

The energy class categorizes devices into groups according to the current they consume, ranging from the lowest D to the highest A+++.

2. The higher the energy class, the lower the electricity consumption.

3. For example, for a 12 sq.m. kitchen with an extractor fan that has an absorption power of about 340m³/h and frequent weekly use, the difference in annual cost from D to A is about €6, and from A to A+++ the difference is almost negligible.
Average Energy Consumption per Year
57 kWh/y
Extraction Flow Efficiency
E

Extraction Flow Efficiency

Expresses how effective the extractor is in absorbing odors. 2. The performance scale starts at G for less efficient extractors and goes up to A for more efficient ones. 3. Typically, a rating of D and above is a good performance for effectively absorbing odors from cooking.
Lighting Efficiency
C

Lighting Efficiency

Expresses the intensity of the hood's lighting. The scale starts from G for the lowest performance where the lighting is quite soft, up to A for the highest performance where the lighting is more intense. It is usually recommended to have a lighting performance index of C or higher to facilitate cooking with more intense lighting.
Fat Retention Efficiency
D

Fat Retention Efficiency

Shows how effectively the filters of the extractor work in retaining fat. 


The scale starts from G for the lowest performance, up to A for the highest performance. 


A performance rating of C and above is considered satisfactory for fat retention during cooking.
Noise Level
68 dB

Noise Level

Shows how much noise the extractor makes when it is in operation.

2. The fewer the db, the quieter it is. An extractor with 58db or less is considered quite quiet.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Reviews (2)

Reviews

3.0
2
3.0
Review this product
  1. 1
  2. 4 stars
    0
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1
Review this product
  • 5
    nick_triantafyllos

    Verified purchase

    • Performance
    • Construction quality
    • Value for money
    • Is its lighting satisfactory?
    • Moderate noise
  • 1
    nikaso_6969

    Verified purchase

    This review is about the width: 60 cm

    • Is the lighting relatively satisfactory?
    • Performance
    • Noisy
    • Construction quality
    • Value for money

Description & Specifications

  • Type Wall-mounted Chimney Hood
  • Maximum Extraction Capacity IEC 395 m3/h
  • Energy Consumption Class D
  • Operating Levels 3
  • Color Inox
  • Annual Energy Consumption 42 kWh
  • Motor 1
  • Width 90 cm
  • Filter Type Metal filters that are dishwasher washable
  • Ability to Change Filters to Active Carbon CFC0141497
  • Noise Level 49-68 db
  • Outlet Diameter 150 mm
  • Lighting: 2x3 W LED
  • Dimensions in cm (HxWxD): 73.9 (106.1) x 89.8 x 45 cm

Features

  • Maximum Absorption IEC 395 m3/h
  • Energy Consumption D
  • Operating Levels 3
  • Color Inox
  • Annual Energy Consumption 42 kWh
  • Motor 1
  • Width 90 cm
  • Filter Type Metal filters that are dishwasher safe
  • Option to Change Filters to Activated Carbon CFC0141497
  • Noise Level 49-68 db
  • Outlet Diameter 150 mm
  • Lighting: 2×3 W LED
  • Dimensions in cm (HxWxD): 73.9 (106.1) x 89.8 x 45 cm

Manufacturer

Manufacturer Details

Warnings & Safety Information
Product Number
PRF0091763B

Product Details

Type
Chimney

Type

Chimney
The chimney-style hoods cover the air duct with a decorative element that resembles a chimney.
Retro
No
Grease Filter Material
Charcoal (optional), Metal

Grease Filter Material

Charcoal (optional)

Carbon filters are used when range hoods operate without a duct connection and the air is recirculated into the room.


They are not washable and it is recommended to replace them every 4 months.


Their use reduces the efficiency of the range hood by about 30%.

Metal

They are used in most extractors. Metallic filters are easy to remove and clean, either in the dishwasher or by hand. They do not require frequent replacement.
Extraction Mode
Extraction

Extraction Mode

Concerns the way in which the extractor absorbs air.

Extraction

The air that the extractor pulls is expelled from the house through a pipe, cleaning the atmosphere in the kitchen.
Dual Motor
No
Type of Control
Switches
Timer Function
No
Filter Cleaning Indicator
No
Washable Filter
Yes
Colour
Inox

Technical Features

Extraction Power (Max)
395 m³/h

Extraction Power (Max)

Displays the maximum absorption capacity. To calculate the required absorbency, knowledge of the dimensions of the kitchen space is necessary.


For example, for a 7 sqm kitchen, the required absorption power is approximately 200m³/h, for 12 sqm it is approximately 340m³/h, and for 15 sqm it is 420m³/h and above.

Dimensions

Width
90 cm
Length
-

Energy Label

Energy Class
D

Energy Class

The energy class categorizes devices into groups according to the current they consume, ranging from the lowest D to the highest A+++.

2. The higher the energy class, the lower the electricity consumption.

3. For example, for a 12 sq.m. kitchen with an extractor fan that has an absorption power of about 340m³/h and frequent weekly use, the difference in annual cost from D to A is about €6, and from A to A+++ the difference is almost negligible.
Average Energy Consumption per Year
57 kWh/y
Extraction Flow Efficiency
E

Extraction Flow Efficiency

Expresses how effective the extractor is in absorbing odors. 2. The performance scale starts at G for less efficient extractors and goes up to A for more efficient ones. 3. Typically, a rating of D and above is a good performance for effectively absorbing odors from cooking.
Lighting Efficiency
C

Lighting Efficiency

Expresses the intensity of the hood's lighting. The scale starts from G for the lowest performance where the lighting is quite soft, up to A for the highest performance where the lighting is more intense. It is usually recommended to have a lighting performance index of C or higher to facilitate cooking with more intense lighting.
Fat Retention Efficiency
D

Fat Retention Efficiency

Shows how effectively the filters of the extractor work in retaining fat. 


The scale starts from G for the lowest performance, up to A for the highest performance. 


A performance rating of C and above is considered satisfactory for fat retention during cooking.
Noise Level
68 dB

Noise Level

Shows how much noise the extractor makes when it is in operation.

2. The fewer the db, the quieter it is. An extractor with 58db or less is considered quite quiet.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

Reviews (2)

3.0
2
3.0
Review this product
  1. 1
  2. 4 stars
    0
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1
Review this product
  • 5
    nick_triantafyllos

    Verified purchase

    • Performance
    • Construction quality
    • Value for money
    • Is its lighting satisfactory?
    • Moderate noise
  • 1
    nikaso_6969

    Verified purchase

    This review is about the width: 60 cm

    • Is the lighting relatively satisfactory?
    • Performance
    • Noisy
    • Construction quality
    • Value for money