Please note, those of you who are purchasing this to add an additional fan to the 500DX case, it is not the same as the ones provided in the box. The ones included in the case have:
Fan speed (rpm) 900
Noise level (dB) 17.1 (even here we are not completely silent)
Airflow CFM 55.8
while this one has:
Fan speed (rpm) 1000
Noise level (dB) 18.8
Airflow CFM 61.2
So, you gain in airflow but the noise increases noticeably in practice. To be considered silent, it should be (subjectively) below 16db. Therefore, you will need to adjust the motherboard (dc control from UEFI/BIOS) to reduce the speed to 800 rpm, which gives less than 16db.
If you are not interested in adjustments or have an older motherboard and want to directly connect a fan to 4pin/molex and have it run at low speed, it is better to go for something like the Scythe KazeFlex 120 (800rpm) to keep your ears quiet.
Να έχετε υπόψη όσοι το παίρνετε για να προσθέσετε ακόμη ένα fan στο 500DX case, ότι δεν είναι ακριβός το ίδιο με τα παρεχόμενα στο κουτί.
Αυτά που είναι μέσα στο case έχουν:
Fan speed (rpm) 900
Noise level(dB) 17.1 (ακόμη και εδώ δεν είμαστε τελείως αθόρυβοι)
Airflow CFM 55.8
ενώ το παρόν έχει:
Fan speed (rpm) 1000
Noise level(dB) 18.8
Airflow CFM 61.2
δλδ κερδίζετε σε airflow αλλά ανεβαίνει ο θόρυβος και θα έλεγα αισθητά στην πράξη. Για να πεις κάτι αθόρυβο πρέπει να είναι (υποκειμενικό) κάτω από 16db. Επομένως θα θέλει ρύθμιση (dc control από το UEFI/BIOS) της μητρικής για να πέσει στις 800 στροφές που δίνουν λιγότερο από 16db.
Αν δεν ασχολείστε με ρυθμίσεις ή έχετε παλιά μητρική και θέλετε να κουμπώσετε ένα fun απ’ ευθείας σε 4pin/molex και να δουλέψει χαμηλά, πάτε καλύτερα σε κάτι σαν το Scythe KazeFlex 120 (800rpm) για να έχετε τα αυτιά σας ήσυχα.