Skroutz.mt

Gardena 3000/4 Electric Surface Water Pump with Automatic Suction 0.8hp
Surface Water Pumps

Gardena 3000/4 Electric Surface Water Pump with Automatic Suction 0.8hp Code: 01707-20

The Gardena 3000/4 surface pump is designed for watering, pressure boosting, and transferring or pumping tap water, rainwater, and chlorinated pool water. It has a power rating of 600 W and a maximum...

The Gardena 3000/4 surface pump is designed for watering, pressure boosting, and transferring or pumping tap water, rainwater, and chlorinated pool water. It has a power rating of 600 W and a maximum flow rate of 3,100 l/h, with a maximum head of 36 m.

Its automatic suction lift reaches up to 7 m. The large opening makes it easy to fill before first use,...

See full description See full description

Top specs

  • Power Supply

    Electric

    Ideal for continuous and demanding operation (e.g. for a flooded field and/or basement) 2. More economical consumption than gasoline-powered pumps 3. More environmentally friendly

  • Self-Priming

    The engine is automatically activated when the water in the tank falls below the lower limit. Similarly, it is deactivated when the tank is filled.

  • Manometric Height

    This is the distance from the suction point to the maximum height that the water reaches (For example, for a height of 10 meters of water, a pressure of 1 bar is required).

  • Pressure

    The unit of measurement for the pressure exerted by the pump on the water (For example, for a height of 10 meters of water, a pressure of 1 bar is required).
  • See all
115 00 €
Delivery by Mon, 09 Nov
29,00 €   shipping cost
Sent from Greece
From Psillas
Greece
1 piece
See Water Pumps on the page of Psillas

Learn more about invoicing
Product report

Description

Description

The Gardena 3000/4 surface pump is designed for watering, pressure boosting, and transferring or pumping tap water, rainwater, and chlorinated pool water. It has a power rating of 600 W and a maximum flow rate of 3,100 l/h, with a maximum head of 36 m.

Its automatic suction lift reaches up to 7 m. The large opening makes it easy to fill before first use, while the ergonomic handle helps with transport. The rubber base provides stable support and quiet, low-vibration operation. The pump has a drain screw for emptying residual water, while the thermal protection switch protects the motor from overloading.

  • Power supply: Electric
  • Power: 600 W
  • Horsepower: 0.8 hp
  • Type: Surface
  • Suction: Automatic
  • Maximum suction lift: 7 m
  • Maximum flow rate: 3,100 l/h
  • Maximum head: 36 m
  • Maximum pressure: 3.6 bar
  • Installation: Horizontal
  • Cable length: 1.5 m
  • Maximum liquid temperature: 35 °C
  • Dimensions: 38.5 × 23 × 29.5 cm
  • Weight: 6.2 kg
  • Materials and protection: Ceramic protection, double seal between the motor and impeller, thermal protection switch

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Number
01707-20

Main Specifications

Power Source
Electric

Power Source

Electric
Ideal for continuous and demanding operation (e.g. for a flooded field and/or basement) 2. More economical consumption than gasoline-powered pumps 3. More environmentally friendly
Placement
Horizontal
Automatic Suction
Yes

Automatic Suction

The engine is automatically activated when the water in the tank falls below the lower limit. Similarly, it is deactivated when the tank is filled.
Centrifugal
No

Centrifugal

Pumps with impellers that enhance water flow.
Firefighting
No
Set
No

Technical Specifications

Horsepower
0.8 hp
Power
600 W
Manometric Head
36 m

Manometric Head

This is the distance from the suction point to the maximum height that the water reaches (For example, for a height of 10 meters of water, a pressure of 1 bar is required).
Pressure
3.6 bar

Pressure

The unit of measurement for the pressure exerted by the pump on the water (For example, for a height of 10 meters of water, a pressure of 1 bar is required).

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Reviews (2)

Reviews

5.0
2
5.0
Review this product
  1. 2
  2. 4 stars
    0
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1 star
    0
Review this product
  • athanassios.com.gr
    5
    2 out of 4 members found this review helpful
    athanassios.com.gr

    For a garden with 50 trees and just as many shrubs and potted plants, it used to take me over 1 1/2 hours with a 30-meter hose on a regular faucet in Athens. I would often have to water deeply within half an hour. UNBELIEVABLE!!! When I closed the machine and the normal water pressure ran, the difference seemed ridiculous.

    For a regular faucet, you need 100% two (preferably metal) 1" connectors with threads to attach to the machine (and then the hoses with 1/2" connectors attach to them), two pieces of 1/2" hose (preferably flexible), and 4 1/2" connectors. You also need a hose to connect the machine to the faucet and another one to connect it to the hose reel. In my case, I needed two 5-meter pieces to reach the power outlet. Otherwise, you only need one piece of hose with two connectors for the faucet, and then you attach your hose to the machine. However, the hose reel with a 30 or 50-meter hose is a lifesaver; it just requires another piece of hose with two connectors to connect it to the faucet.

    Be careful to always fill the water inlet with at least one bottle of water and empty it when you're done.

    I truly wonder why I didn't get this years earlier and wasted time and had inadequate watering. Every amateur gardener will love it. Personally, I was lucky and got it in its original box at an unclaimed store. 95€ is a small price for what it offers.

    Translated from Greek ·
    Did you find this review helpful?
  • 5
    kostas_sotirakis691

    Verified purchase

  • athanassios.com.gr
    5
    athanassios.com.gr

    For a garden with 50 trees and just as many shrubs and potted plants, it used to take me over 1 1/2 hours with a 30-meter hose on a regular faucet in Athens. I would often have to water deeply within half an hour. UNBELIEVABLE!!! When I closed the machine and the normal water pressure ran, the difference seemed ridiculous.

    For a regular faucet, you need 100% two (preferably metal) 1" connectors with threads to attach to the machine (and then the hoses with 1/2" connectors attach to them), two pieces of 1/2" hose (preferably flexible), and 4 1/2" connectors. You also need a hose to connect the machine to the faucet and another one to connect it to the hose reel. In my case, I needed two 5-meter pieces to reach the power outlet. Otherwise, you only need one piece of hose with two connectors for the faucet, and then you attach your hose to the machine. However, the hose reel with a 30 or 50-meter hose is a lifesaver; it just requires another piece of hose with two connectors to connect it to the faucet.

    Be careful to always fill the water inlet with at least one bottle of water and empty it when you're done.

    I truly wonder why I didn't get this years earlier and wasted time and had inadequate watering. Every amateur gardener will love it. Personally, I was lucky and got it in its original box at an unclaimed store. 95€ is a small price for what it offers.

    Translated from Greek ·
    2
  • 5
    kostas_sotirakis691

    0
  • See all

Description & Specifications

The Gardena 3000/4 surface pump is designed for watering, pressure boosting, and transferring or pumping tap water, rainwater, and chlorinated pool water. It has a power rating of 600 W and a maximum flow rate of 3,100 l/h, with a maximum head of 36 m.

Its automatic suction lift reaches up to 7 m. The large opening makes it easy to fill before first use, while the ergonomic handle helps with transport. The rubber base provides stable support and quiet, low-vibration operation. The pump has a drain screw for emptying residual water, while the thermal protection switch protects the motor from overloading.

  • Power supply: Electric
  • Power: 600 W
  • Horsepower: 0.8 hp
  • Type: Surface
  • Suction: Automatic
  • Maximum suction lift: 7 m
  • Maximum flow rate: 3,100 l/h
  • Maximum head: 36 m
  • Maximum pressure: 3.6 bar
  • Installation: Horizontal
  • Cable length: 1.5 m
  • Maximum liquid temperature: 35 °C
  • Dimensions: 38.5 × 23 × 29.5 cm
  • Weight: 6.2 kg
  • Materials and protection: Ceramic protection, double seal between the motor and impeller, thermal protection switch

Manufacturer

Manufacturer Details

Warnings & Safety Information
Product Number
01707-20

Main Specifications

Power Source
Electric

Power Source

Electric
Ideal for continuous and demanding operation (e.g. for a flooded field and/or basement) 2. More economical consumption than gasoline-powered pumps 3. More environmentally friendly
Placement
Horizontal
Automatic Suction
Yes

Automatic Suction

The engine is automatically activated when the water in the tank falls below the lower limit. Similarly, it is deactivated when the tank is filled.
Centrifugal
No

Centrifugal

Pumps with impellers that enhance water flow.
Firefighting
No
Set
No

Technical Specifications

Horsepower
0.8 hp
Power
600 W
Manometric Head
36 m

Manometric Head

This is the distance from the suction point to the maximum height that the water reaches (For example, for a height of 10 meters of water, a pressure of 1 bar is required).
Pressure
3.6 bar

Pressure

The unit of measurement for the pressure exerted by the pump on the water (For example, for a height of 10 meters of water, a pressure of 1 bar is required).

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

Reviews (2)

5.0
2
5.0
Review this product
  1. 2
  2. 4 stars
    0
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1 star
    0
Review this product
  • athanassios.com.gr
    5
    2 out of 4 members found this review helpful
    athanassios.com.gr

    For a garden with 50 trees and just as many shrubs and potted plants, it used to take me over 1 1/2 hours with a 30-meter hose on a regular faucet in Athens. I would often have to water deeply within half an hour. UNBELIEVABLE!!! When I closed the machine and the normal water pressure ran, the difference seemed ridiculous.

    For a regular faucet, you need 100% two (preferably metal) 1" connectors with threads to attach to the machine (and then the hoses with 1/2" connectors attach to them), two pieces of 1/2" hose (preferably flexible), and 4 1/2" connectors. You also need a hose to connect the machine to the faucet and another one to connect it to the hose reel. In my case, I needed two 5-meter pieces to reach the power outlet. Otherwise, you only need one piece of hose with two connectors for the faucet, and then you attach your hose to the machine. However, the hose reel with a 30 or 50-meter hose is a lifesaver; it just requires another piece of hose with two connectors to connect it to the faucet.

    Be careful to always fill the water inlet with at least one bottle of water and empty it when you're done.

    I truly wonder why I didn't get this years earlier and wasted time and had inadequate watering. Every amateur gardener will love it. Personally, I was lucky and got it in its original box at an unclaimed store. 95€ is a small price for what it offers.

    Translated from Greek ·
    Did you find this review helpful?
  • 5
    kostas_sotirakis691

    Verified purchase

  • athanassios.com.gr
    5
    athanassios.com.gr

    For a garden with 50 trees and just as many shrubs and potted plants, it used to take me over 1 1/2 hours with a 30-meter hose on a regular faucet in Athens. I would often have to water deeply within half an hour. UNBELIEVABLE!!! When I closed the machine and the normal water pressure ran, the difference seemed ridiculous.

    For a regular faucet, you need 100% two (preferably metal) 1" connectors with threads to attach to the machine (and then the hoses with 1/2" connectors attach to them), two pieces of 1/2" hose (preferably flexible), and 4 1/2" connectors. You also need a hose to connect the machine to the faucet and another one to connect it to the hose reel. In my case, I needed two 5-meter pieces to reach the power outlet. Otherwise, you only need one piece of hose with two connectors for the faucet, and then you attach your hose to the machine. However, the hose reel with a 30 or 50-meter hose is a lifesaver; it just requires another piece of hose with two connectors to connect it to the faucet.

    Be careful to always fill the water inlet with at least one bottle of water and empty it when you're done.

    I truly wonder why I didn't get this years earlier and wasted time and had inadequate watering. Every amateur gardener will love it. Personally, I was lucky and got it in its original box at an unclaimed store. 95€ is a small price for what it offers.

    Translated from Greek ·
    2
  • 5
    kostas_sotirakis691

    0
  • See all
115,00 €
29,00 €   shipping cost