Skroutz.mt

Gardena Single-phase Pump Waste Water / Sewage 4hp 01476-20
Submersible Water Pumps

Gardena Single-phase Pump Waste Water / Sewage 4hp 01476-20

Key features:

  • Maximum pump immersion: 12m
  • Cable length: 15m
  • Output: 6000 lit/h
  • Maximum head height: 45m
  • Maximum pressure: 4.5 bar
  • Power: 1050W
See full description

  • Horsepower

    Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).

  • Voltage

    Single-Phase

    Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 

  • Power

    It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.

  • Manometric Height

    45

    The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

    • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
    • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
  • See all

User Manual

The product is not available for shipping to the selected country.
Review the product
Product report

Description

Description

The Automatic Submersible Irrigation Pump 6000/5 is suitable for deep wells or water tanks with high performance and quiet operation. It pumps water from a depth of up to 13 m - even when submerged for an extended period - for irrigating your garden or for your bathroom's toilet tank. 


Practical automatic functions

For comfortable operation with energy savings, the pump is equipped with innovative automatic operation.

The integrated electronic components with a pressure switch activate the pump when water is needed (e.g., for the toilet flush) and then automatically deactivate it. A practical solution, the pump is not strained and energy is saved.

Sturdy construction and reliable operation

The pump features various characteristics that guarantee safe and long-term operation without issues, while the high-quality materials and strict specifications construction provide the pump with protection from wear.

Additionally, the double sealing of the motor and the ceramic protection ensure high operational safety and the long lifespan of the pump.

Finally, the stainless steel filter prevents impurities from penetrating the pump.

Ease of Use

The sturdy pump retention rope allows for easy submersion without issues, as well as retrieval of the pump if needed. The ergonomic handle allows for comfortable transport of the pump.

Easy Adaptability

The pump's integrated coupling thread complies with international standards and can be easily connected to common systems/common pipes.

The thermal overload switch protects the silent motor with a start capacitor from overload without maintenance requirements. An integrated non-return system prevents pipe leakage after the pump is shut off and shortens the re-priming time upon reactivation.

Dry Run Protection

Water shortage protection is provided. A sensor indicates the excessively low water level and automatically turns off the pump. Through the 4-stage feed turbine, water is pumped efficiently and quietly.

Practical: thanks to the 15 m connection cable, the pump installation is quick and with the provided holding rope, the pump can be easily submerged or retrieved, if needed.

Specifications

  • Maximum pump submersion: 12m
  • Cable length: 15m
  • Output: 6000 lit/h
  • Maximum discharge height: 45m
  • Maximum pressure: 4.5 bar
  • Power: 1050W
  • Weight: 8 kg
  • Power cable type: H07 RNF 
  • Electrical protection category: IP X8 
  • Product size, LxWxH Length: 15cm
  • Product size, LxWxH Width: 15cm 
  • Product size, LxWxH Height: 51cm

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Guides

User Manual

Dimensions

Type
Waste Water / Sewage

Type

Waste Water / Sewage

Waste water / sewage pumps are used for pumping and transporting waste water, sewage, and other liquids containing solids or particles
Power Source
Electric

Power Source

Electric
The power supply refers to the pump's need for electrical energy from an external power source, such as single-phase or three-phase power.
Voltage
Single-Phase

Voltage

Single-Phase

Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 
Horsepower
4 hp

Horsepower

Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).
Power
3000 W

Power

It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.
Cable Length
15 m

Features

Electronic Level Sensor
No

Electronic Level Sensor

It automatically activates the pump without the classic hanging float switch. It is ideal for narrow spaces and pits, as there is no risk of it getting stuck anywhere and flooding the area.
with Cutter Impeller
No

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
No

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Vortex
No

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Maximum Head Height
45 m

Maximum Head Height: 45


The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

  • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
  • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
Maximum Output
6 m³/h

Maximum Output

The maximum output or flow of a submersible water pump, as defined by the manufacturers, is the maximum amount of water the pump can move under ideal conditions, usually with zero head (i.e., no lift resistance).
Pump Submersion Depth
12 m
Shallow Suction
No

Shallow Suction

This function allows the pump to suck water from an extremely low level (up to 1-3 mm), ideal for flooded floors and basements.

Materials & Construction

Set
No
Stainless
No
Protection Certification
IPX8

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

The Automatic Submersible Irrigation Pump 6000/5 is suitable for deep wells or water tanks with high performance and quiet operation. It pumps water from a depth of up to 13 m - even when submerged for an extended period - for irrigating your garden or for your bathroom's toilet tank. 


Practical automatic functions

For comfortable operation with energy savings, the pump is equipped with innovative automatic operation.

The integrated electronic components with a pressure switch activate the pump when water is needed (e.g., for the toilet flush) and then automatically deactivate it. A practical solution, the pump is not strained and energy is saved.

Sturdy construction and reliable operation

The pump features various characteristics that guarantee safe and long-term operation without issues, while the high-quality materials and strict specifications construction provide the pump with protection from wear.

Additionally, the double sealing of the motor and the ceramic protection ensure high operational safety and the long lifespan of the pump.

Finally, the stainless steel filter prevents impurities from penetrating the pump.

Ease of Use

The sturdy pump retention rope allows for easy submersion without issues, as well as retrieval of the pump if needed. The ergonomic handle allows for comfortable transport of the pump.

Easy Adaptability

The pump's integrated coupling thread complies with international standards and can be easily connected to common systems/common pipes.

The thermal overload switch protects the silent motor with a start capacitor from overload without maintenance requirements. An integrated non-return system prevents pipe leakage after the pump is shut off and shortens the re-priming time upon reactivation.

Dry Run Protection

Water shortage protection is provided. A sensor indicates the excessively low water level and automatically turns off the pump. Through the 4-stage feed turbine, water is pumped efficiently and quietly.

Practical: thanks to the 15 m connection cable, the pump installation is quick and with the provided holding rope, the pump can be easily submerged or retrieved, if needed.

Specifications

  • Maximum pump submersion: 12m
  • Cable length: 15m
  • Output: 6000 lit/h
  • Maximum discharge height: 45m
  • Maximum pressure: 4.5 bar
  • Power: 1050W
  • Weight: 8 kg
  • Power cable type: H07 RNF 
  • Electrical protection category: IP X8 
  • Product size, LxWxH Length: 15cm
  • Product size, LxWxH Width: 15cm 
  • Product size, LxWxH Height: 51cm

Manufacturer

Manufacturer Details

Warnings & Safety Information

Product Guides

User Manual

Dimensions

Type
Waste Water / Sewage

Type

Waste Water / Sewage

Waste water / sewage pumps are used for pumping and transporting waste water, sewage, and other liquids containing solids or particles
Power Source
Electric

Power Source

Electric
The power supply refers to the pump's need for electrical energy from an external power source, such as single-phase or three-phase power.
Voltage
Single-Phase

Voltage

Single-Phase

Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 
Horsepower
4 hp

Horsepower

Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).
Power
3000 W

Power

It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.
Cable Length
15 m

Features

Electronic Level Sensor
No

Electronic Level Sensor

It automatically activates the pump without the classic hanging float switch. It is ideal for narrow spaces and pits, as there is no risk of it getting stuck anywhere and flooding the area.
with Cutter Impeller
No

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
No

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Vortex
No

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Maximum Head Height
45 m

Maximum Head Height: 45


The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

  • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
  • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
Maximum Output
6 m³/h

Maximum Output

The maximum output or flow of a submersible water pump, as defined by the manufacturers, is the maximum amount of water the pump can move under ideal conditions, usually with zero head (i.e., no lift resistance).
Pump Submersion Depth
12 m
Shallow Suction
No

Shallow Suction

This function allows the pump to suck water from an extremely low level (up to 1-3 mm), ideal for flooded floors and basements.

Materials & Construction

Set
No
Stainless
No
Protection Certification
IPX8

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.