Skroutz.mt

Metabo Single-phase Pump Waste Water / Sewage 1.29hp 0251600000
Submersible Water Pumps

Metabo Single-phase Pump Waste Water / Sewage 1.29hp 0251600000

TPS 16000 S Combi Submersible Clean - Dirty Water Pump 970W

Features:

  • Power rating (W): 970
  • Electric voltage (V): 230
  • Max transfer quantity (l/h): 16,000
  • Max transfer height (m): 9.5
  • Max pressure...

TPS 16000 S Combi Submersible Clean - Dirty Water Pump 970W

Features:

  • Power rating (W): 970
  • Electric voltage (V): 230
  • Max transfer quantity (l/h): 16,000
  • Max transfer height (m): 9.5
  • Max pressure (bar): 0.95
  • Max immersion depth (m): 7
  • Max particle size (mm): 30
  • Pump housing: Plastic
  • Outlet (FThr): 1 1/2” Female thread
  • Number of impellers: 1
  • Weight (Kg): 7.8...
See full description See full description

  • Horsepower

    Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).

  • Voltage

    Single-Phase

    Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 

  • Power

    It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.

  • Manometric Height

    9.5

    The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

    • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
    • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
  • See all
The product is not available for shipping to the selected country.
Review the product
Product report

Description

Description

TPS 16000 S Combi Submersible Clean - Dirty Water Pump 970W

Features:

  • Power rating (W): 970
  • Electric voltage (V): 230
  • Max transfer quantity (l/h): 16,000
  • Max transfer height (m): 9.5
  • Max pressure (bar): 0.95
  • Max immersion depth (m): 7
  • Max particle size (mm): 30
  • Pump housing: Plastic
  • Outlet (FThr): 1 1/2” Female thread
  • Number of impellers: 1
  • Weight (Kg): 7.8
  • Cable length (m): 10

Description:

  • Use of submersible pump for clean water or wastewater.
  • Ideal for pumping and circulating fresh or dirty water from tanks, pools, or flooded basements.
  • Suitable for irrigation from water tanks.
  • Shallow suction at 1 mm (when operating as a fresh water pump).
  • Easy adjustment of the base.
  • By placing the pump base in the lowest possible position, maximum pumping is achieved.
  • Float switch for automatic operation.
  • Level adjustment for the float switch.
  • Function selection buttons on the plug.
  • Housing made of durable plastic.
  • For suction of particles up to 30 mm (when operating as a sewage pump).
  • Connecting angle with multiple adapter.
  • Ergonomic carry handle.

Package contents:

  • Connecting angle with multiple adapter.
  • Float switch.

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Dimensions

Type
Waste Water / Sewage

Type

Waste Water / Sewage

Waste water / sewage pumps are used for pumping and transporting waste water, sewage, and other liquids containing solids or particles
Power Source
Electric

Power Source

Electric
The power supply refers to the pump's need for electrical energy from an external power source, such as single-phase or three-phase power.
Voltage
Single-Phase

Voltage

Single-Phase

Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 
Horsepower
1.29 hp

Horsepower

Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).
Power
967.5 W

Power

It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.
Cable Length
7 m

Features

Electronic Level Sensor
No

Electronic Level Sensor

It automatically activates the pump without the classic hanging float switch. It is ideal for narrow spaces and pits, as there is no risk of it getting stuck anywhere and flooding the area.
with Cutter Impeller
No

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
Yes

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Outlet Nozzle
1/2"

Outlet Nozzle

The outlet nozzle refers to the point or the external diameter of the pump from which the pumped water or liquid exits. It is an important feature for determining the connection of the pump with the piping system and affects the flow capacity of the liquid.
Vortex
No

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Maximum Head Height
9.5 m

Maximum Head Height: 9.5


The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

  • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
  • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
Pump Submersion Depth
7 m
Maximum Particle Size
30 mm

Maximum Particle Size

Specifies the largest size of solid particles (such as sand, stones, or other impurities) that the device can pump without clogging or being damaged.
Shallow Suction
Yes

Shallow Suction

This function allows the pump to suck water from an extremely low level (up to 1-3 mm), ideal for flooded floors and basements.

Materials & Construction

Set
No
Stainless
No
Protection Certification
IPX8

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

TPS 16000 S Combi Submersible Clean - Dirty Water Pump 970W

Features:

  • Power rating (W): 970
  • Electric voltage (V): 230
  • Max transfer quantity (l/h): 16,000
  • Max transfer height (m): 9.5
  • Max pressure (bar): 0.95
  • Max immersion depth (m): 7
  • Max particle size (mm): 30
  • Pump housing: Plastic
  • Outlet (FThr): 1 1/2” Female thread
  • Number of impellers: 1
  • Weight (Kg): 7.8
  • Cable length (m): 10

Description:

  • Use of submersible pump for clean water or wastewater.
  • Ideal for pumping and circulating fresh or dirty water from tanks, pools, or flooded basements.
  • Suitable for irrigation from water tanks.
  • Shallow suction at 1 mm (when operating as a fresh water pump).
  • Easy adjustment of the base.
  • By placing the pump base in the lowest possible position, maximum pumping is achieved.
  • Float switch for automatic operation.
  • Level adjustment for the float switch.
  • Function selection buttons on the plug.
  • Housing made of durable plastic.
  • For suction of particles up to 30 mm (when operating as a sewage pump).
  • Connecting angle with multiple adapter.
  • Ergonomic carry handle.

Package contents:

  • Connecting angle with multiple adapter.
  • Float switch.

Manufacturer

Manufacturer Details

Warnings & Safety Information

Dimensions

Type
Waste Water / Sewage

Type

Waste Water / Sewage

Waste water / sewage pumps are used for pumping and transporting waste water, sewage, and other liquids containing solids or particles
Power Source
Electric

Power Source

Electric
The power supply refers to the pump's need for electrical energy from an external power source, such as single-phase or three-phase power.
Voltage
Single-Phase

Voltage

Single-Phase

Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 
Horsepower
1.29 hp

Horsepower

Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).
Power
967.5 W

Power

It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.
Cable Length
7 m

Features

Electronic Level Sensor
No

Electronic Level Sensor

It automatically activates the pump without the classic hanging float switch. It is ideal for narrow spaces and pits, as there is no risk of it getting stuck anywhere and flooding the area.
with Cutter Impeller
No

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
Yes

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Outlet Nozzle
1/2"

Outlet Nozzle

The outlet nozzle refers to the point or the external diameter of the pump from which the pumped water or liquid exits. It is an important feature for determining the connection of the pump with the piping system and affects the flow capacity of the liquid.
Vortex
No

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Maximum Head Height
9.5 m

Maximum Head Height: 9.5


The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

  • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
  • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
Pump Submersion Depth
7 m
Maximum Particle Size
30 mm

Maximum Particle Size

Specifies the largest size of solid particles (such as sand, stones, or other impurities) that the device can pump without clogging or being damaged.
Shallow Suction
Yes

Shallow Suction

This function allows the pump to suck water from an extremely low level (up to 1-3 mm), ideal for flooded floors and basements.

Materials & Construction

Set
No
Stainless
No
Protection Certification
IPX8

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.