Skroutz.mt

DAB Electric Surface Water Pump Centrifugal with Automatic Suction 0.8hp Single-Phase
Surface Water Pumps

DAB Electric Surface Water Pump Centrifugal with Automatic Suction 0.8hp Single-Phase Code: Jetinox 82M

The DAB Jetinox 82M surface pump is a self-priming centrifugal pump designed for horizontal installation. It has a power rating of 600 W and operates on a single-phase 230 V, 50 Hz power supply.

  • ...

The DAB Jetinox 82M surface pump is a self-priming centrifugal pump designed for horizontal installation. It has a power rating of 600 W and operates on a single-phase 230 V, 50 Hz power supply.

  • Type: Self-priming Jet centrifugal water pump
  • Power: 600 W
  • Horsepower: 0.8 hp
  • Power supply: Electric, single-phase
  • Installation: Horizontal
  • Flow rate: 3.6 m³/h
  • ...
See full description See full description

Top specs

  • Power Supply

    Electric

    Ideal for continuous and demanding operation (e.g. for a flooded field and/or basement) 2. More economical consumption than gasoline-powered pumps 3. More environmentally friendly

  • Self-Priming

    The engine is automatically activated when the water in the tank falls below the lower limit. Similarly, it is deactivated when the tank is filled.

  • Centrifugal

    Pumps with impellers that enhance water flow.
  • Voltage Single-Phase

  • Flow rate

    The amount of water that the pump can provide. For example, 6m³/h is equivalent to 100 liters/minute.

  • Manometric Height

    This is the distance from the suction point to the maximum height that the water reaches (For example, for a height of 10 meters of water, a pressure of 1 bar is required).

  • Pressure

    The unit of measurement for the pressure exerted by the pump on the water (For example, for a height of 10 meters of water, a pressure of 1 bar is required).
  • See all
195 00 €
Delivery by Mon, 09 Nov
44,00 €   shipping cost
Sent from Greece
From Thermocity 4.8 (67)
4.8 (67 reviews)
Greece
20+ pieces
See Water Pumps on the page of Thermocity

Learn more about invoicing
Product report

Description

Description

The DAB Jetinox 82M surface pump is a self-priming centrifugal pump designed for horizontal installation. It has a power rating of 600 W and operates on a single-phase 230 V, 50 Hz power supply.

  • Type: Self-priming Jet centrifugal water pump
  • Power: 600 W
  • Horsepower: 0.8 hp
  • Power supply: Electric, single-phase
  • Installation: Horizontal
  • Flow rate: 3.6 m³/h
  • Total head: 47 m
  • Maximum operating pressure: 8 bar
  • Inlet port: 1"
  • Outlet port: 1"
  • Pump body material: Stainless steel
  • Impeller material: Technopolymer
  • Pumped liquid temperature: 0 °C to 40 °C
  • Weight: 7.8 kg

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Number
Jetinox 82M

Main Specifications

Power Source
Electric

Power Source

Electric
Ideal for continuous and demanding operation (e.g. for a flooded field and/or basement) 2. More economical consumption than gasoline-powered pumps 3. More environmentally friendly
Placement
Horizontal
Automatic Suction
Yes

Automatic Suction

The engine is automatically activated when the water in the tank falls below the lower limit. Similarly, it is deactivated when the tank is filled.
Centrifugal
Yes

Centrifugal

Pumps with impellers that enhance water flow.
Firefighting
No
Power Type
Single-Phase
Set
No

Technical Specifications

Horsepower
0.8 hp
Power
600 W
Flow Rate
3.6 m³/h

Flow Rate

The amount of water that the pump can provide. For example, 6m³/h is equivalent to 100 liters/minute.
Manometric Head
47 m

Manometric Head

This is the distance from the suction point to the maximum height that the water reaches (For example, for a height of 10 meters of water, a pressure of 1 bar is required).
Pressure
8 bar

Pressure

The unit of measurement for the pressure exerted by the pump on the water (For example, for a height of 10 meters of water, a pressure of 1 bar is required).

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Reviews (1)

Reviews

4.0
1
4.0
Review this product
  1. 5 stars
    0
  2. 1
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1 star
    0
Review this product
  • 4
    Anastasios_Mayromatis

    Verified purchase

    It could be a little quieter..otherwise, it's good...

    Translated from Greek ·
    Did you find this review helpful?

Description & Specifications

The DAB Jetinox 82M surface pump is a self-priming centrifugal pump designed for horizontal installation. It has a power rating of 600 W and operates on a single-phase 230 V, 50 Hz power supply.

  • Type: Self-priming Jet centrifugal water pump
  • Power: 600 W
  • Horsepower: 0.8 hp
  • Power supply: Electric, single-phase
  • Installation: Horizontal
  • Flow rate: 3.6 m³/h
  • Total head: 47 m
  • Maximum operating pressure: 8 bar
  • Inlet port: 1"
  • Outlet port: 1"
  • Pump body material: Stainless steel
  • Impeller material: Technopolymer
  • Pumped liquid temperature: 0 °C to 40 °C
  • Weight: 7.8 kg

Manufacturer

Manufacturer Details

Warnings & Safety Information
Product Number
Jetinox 82M

Main Specifications

Power Source
Electric

Power Source

Electric
Ideal for continuous and demanding operation (e.g. for a flooded field and/or basement) 2. More economical consumption than gasoline-powered pumps 3. More environmentally friendly
Placement
Horizontal
Automatic Suction
Yes

Automatic Suction

The engine is automatically activated when the water in the tank falls below the lower limit. Similarly, it is deactivated when the tank is filled.
Centrifugal
Yes

Centrifugal

Pumps with impellers that enhance water flow.
Firefighting
No
Power Type
Single-Phase
Set
No

Technical Specifications

Horsepower
0.8 hp
Power
600 W
Flow Rate
3.6 m³/h

Flow Rate

The amount of water that the pump can provide. For example, 6m³/h is equivalent to 100 liters/minute.
Manometric Head
47 m

Manometric Head

This is the distance from the suction point to the maximum height that the water reaches (For example, for a height of 10 meters of water, a pressure of 1 bar is required).
Pressure
8 bar

Pressure

The unit of measurement for the pressure exerted by the pump on the water (For example, for a height of 10 meters of water, a pressure of 1 bar is required).

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

Reviews (1)

4.0
1
4.0
Review this product
  1. 5 stars
    0
  2. 1
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1 star
    0
Review this product
  • 4
    Anastasios_Mayromatis

    Verified purchase

    It could be a little quieter..otherwise, it's good...

    Translated from Greek ·
    Did you find this review helpful?
195,00 €
44,00 €   shipping cost