Skroutz.mt

QNap TS-h1090FU NAS Rack with 10 Hard Drive Slots for SSD and 2 Ethernet Ports
File Servers / NAS

QNap TS-h1090FU NAS Rack with 10 Hard Drive Slots for SSD and 2 Ethernet Ports

The TS-h1090FU all-flash NVMe unit is designed to deliver exceptional performance and high cost savings. Equipped with ten bays for U.2 NVMe Gen 4 x4 SSDs, the TS-h1090FU offers extremely high IOPS...

The TS-h1090FU all-flash NVMe unit is designed to deliver exceptional performance and high cost savings. Equipped with ten bays for U.2 NVMe Gen 4 x4 SSDs, the TS-h1090FU offers extremely high IOPS and read/write performance with ultra-low latency. The ZFS-based QuTS hero OS supports inline data deduplication and compression to reduce SSD I/O wear,...

See full description See full description
The product is not available for shipping to the selected country.
Review the product
Product report

Description

Description

The TS-h1090FU all-flash NVMe unit is designed to deliver exceptional performance and high cost savings. Equipped with ten bays for U.2 NVMe Gen 4 x4 SSDs, the TS-h1090FU offers extremely high IOPS and read/write performance with ultra-low latency. The ZFS-based QuTS hero OS supports inline data deduplication and compression to reduce SSD I/O wear, significantly extending SSD lifespan with a higher cost-performance ratio for all-flash storage arrays.

Ideal for I/O-intensive applications with latency, the TS-h1090FU eliminates bottlenecks in virtualization, modern data centers, media storage, and mission-critical backup/restore tasks.

  • Space-saving with a depth of only 58 cm compared to over 80 cm in a 1U chassis.
  • Supports ten bays for U.2 NVMe PCIe Gen 4 or SATA 6 Gb/s SSDs.
  • Inline data deduplication and compression, over-provisioning, and TRIM for maximum SSD performance and lifespan.
  • Accelerates virtualization, intensive file access, media transfer, and large backup/restore tasks.
  • Capability to install 10/25/40/100 GbE cards, QM2 cards, or Fiber Channel cards for increased performance.
  • Support for virtualization storage, SR-IOV-enabled VMs, and container applications.
  • Design allows expansion with cost-effective QNAP expansion units.

Case: 2U rack. Height: 44 mm. Width: 430 mm. USB 3.0 ports: 3.

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Main Specifications

Form Factor
Rack

Dimensions

Height
44 mm
Width
430 mm
Length
580 mm

Processor

Manufacturer
AMD
Model
EPYC 7232P
Cores
Eight Core
Frequency
3.1 GHz

RAM Memory

Size
64 GB
Type
DDR4

Storage

Hard Drive Slots
10 Bays
Supported Drives
SSD
Communication Protocol
SATA III (6 Gbit/s)
Raid
0, 1, 10, 5, 50, 6, 60
File System
EXT3, EXT4, HFS+, NTFS
Extras
Backup Server, Cloud Server, Database Server, FTP Server, File Server, Mail Server, Media Server
Hot Swapping
-

Hot Swapping

Allows the replacement of a faulty drive without shutting down the NAS. Essential for businesses and professionals who do not want to interrupt their network or applications even for a minute.

Additional Features

Connections
USB 3.2
Ethernet Ports
2 Port
Link Aggregation
-

Link Aggregation

Link Aggregation is a technique that allows the NAS to use two or more network (Ethernet) ports simultaneously as if they were one.

  • What it offers: It doubles (or multiplies) the data transfer speed and ensures that the connection will not be interrupted if one cable fails.

  • Why you need it: It is essential in environments where many users (e.g., in an office) request files at the same time, as it prevents network "bottlenecks."

  • Requirement: To function, it requires compatible network equipment (Managed Switch) that supports the same protocol.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

The TS-h1090FU all-flash NVMe unit is designed to deliver exceptional performance and high cost savings. Equipped with ten bays for U.2 NVMe Gen 4 x4 SSDs, the TS-h1090FU offers extremely high IOPS and read/write performance with ultra-low latency. The ZFS-based QuTS hero OS supports inline data deduplication and compression to reduce SSD I/O wear, significantly extending SSD lifespan with a higher cost-performance ratio for all-flash storage arrays.

Ideal for I/O-intensive applications with latency, the TS-h1090FU eliminates bottlenecks in virtualization, modern data centers, media storage, and mission-critical backup/restore tasks.

  • Space-saving with a depth of only 58 cm compared to over 80 cm in a 1U chassis.
  • Supports ten bays for U.2 NVMe PCIe Gen 4 or SATA 6 Gb/s SSDs.
  • Inline data deduplication and compression, over-provisioning, and TRIM for maximum SSD performance and lifespan.
  • Accelerates virtualization, intensive file access, media transfer, and large backup/restore tasks.
  • Capability to install 10/25/40/100 GbE cards, QM2 cards, or Fiber Channel cards for increased performance.
  • Support for virtualization storage, SR-IOV-enabled VMs, and container applications.
  • Design allows expansion with cost-effective QNAP expansion units.

Case: 2U rack. Height: 44 mm. Width: 430 mm. USB 3.0 ports: 3.

Manufacturer

Manufacturer Details

Warnings & Safety Information

Main Specifications

Form Factor
Rack

Dimensions

Height
44 mm
Width
430 mm
Length
580 mm

Processor

Manufacturer
AMD
Model
EPYC 7232P
Cores
Eight Core
Frequency
3.1 GHz

RAM Memory

Size
64 GB
Type
DDR4

Storage

Hard Drive Slots
10 Bays
Supported Drives
SSD
Communication Protocol
SATA III (6 Gbit/s)
Raid
0, 1, 10, 5, 50, 6, 60
File System
EXT3, EXT4, HFS+, NTFS
Extras
Backup Server, Cloud Server, Database Server, FTP Server, File Server, Mail Server, Media Server
Hot Swapping
-

Hot Swapping

Allows the replacement of a faulty drive without shutting down the NAS. Essential for businesses and professionals who do not want to interrupt their network or applications even for a minute.

Additional Features

Connections
USB 3.2
Ethernet Ports
2 Port
Link Aggregation
-

Link Aggregation

Link Aggregation is a technique that allows the NAS to use two or more network (Ethernet) ports simultaneously as if they were one.

  • What it offers: It doubles (or multiplies) the data transfer speed and ensures that the connection will not be interrupted if one cable fails.

  • Why you need it: It is essential in environments where many users (e.g., in an office) request files at the same time, as it prevents network "bottlenecks."

  • Requirement: To function, it requires compatible network equipment (Managed Switch) that supports the same protocol.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.