Kraft GO! acrylic primer fills and smooths irregularities on plasterboard, concrete, and similar indoor surfaces. Its water-based formula provides adhesion and helps ensure the final paint finish. It can be recoated with emulsion paint.
Dilute with water by 8–12% by volume and apply one coat using a brush, roller, or airless spray gun. The surface must be dry, sound, and clean. Surface drying time is 1/2–1 hour at 25°C and 50% relative humidity, while the minimum recoating time is 3–4 hours. Do not apply at temperatures below 5°C or above 35°C, or at relative humidity above 65%.
- Type: Primer
- Surface material: Plasterboard
- Surfaces: Interior
- Properties: Filler
- Composition: Acrylic, water-based
- Colour: White
- Dilution: 8–12% by volume with water
- Coverage per coat: 10–12 m²/L
- Surface drying time: 1/2–1 hour at 25°C and 50% relative humidity
- Minimum recoating time: 3–4 hours
- Application: Brush, roller, or airless spray gun
- Application temperature: 5–35°C
- Maximum application relative humidity: 65%
- Density: 1.65 g/mL (±0.03) at 25°C
- Solids by weight: 67.5% (±3)
- pH: 8.5–9.5
- Recommended dry film thickness: 40 μm (±5 μm) per coat
- VOC content, ready to use: Up to 29 g/L
- Volume: 1 L
Specifications
- Genre
- Primer
- Surface Material
- Plasterboard, -
- Surfaces
- Internal
- Properties
- Filling
Quantity
- Mass Gaining
- 1 lt
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.