Skroutz.mt

Akyga AW-14A Case Fan 140mm 1000rpm Without LED Lighting And Connection 3-Pin / 4-Pin Molex
Case Fans

Akyga AW-14A Case Fan 140mm 1000rpm Without LED Lighting And Connection 3-Pin / 4-Pin Molex

The Akyga AW-14A-BK is a 14 cm fan for desktop computers. Thanks to its long blades, it cools components much more effectively than a typical 12 cm fan. Despite its large size, the fan is quiet and...

The Akyga AW-14A-BK is a 14 cm fan for desktop computers. Thanks to its long blades, it cools components much more effectively than a typical 12 cm fan. Despite its large size, the fan is quiet and does not disturb the peace during operation. Additionally, the fan is equipped with high-performance bearings that ensure not only a long lifespan but also...

See full description See full description
Review the product
Product report

Description

Description

The Akyga® AW-14A-BK is a 14 cm fan for desktop computers. Thanks to its long blades, it cools components much more effectively than a typical 12 cm fan. Despite its large size, the fan is quiet and does not disturb the peace during operation. Additionally, the fan is equipped with high-performance bearings that ensure not only a long lifespan but also trouble-free operation at maximum speed. It will also prove useful as a service unit for replacing a broken fan in an ATX power supply. A long 30 cm cable with a Molex/3-pin connector will allow for easy installation even in a large computer case. Mounting loops are also included.

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Main Specifications

Dimension
140 mm

Dimension

The diameter of the fan in millimeters. The larger the fan, the more effective the cooling and the quieter its operation compared to a smaller one. The most common size is 120mm, with some computer cases supporting larger sizes such as 140mm.
Colour
Black
Packaging
1 pcs

Technical Specifications

Fan Speed (Max)
1000 rpm

Fan Speed (Max)

The maximum rotations at which the fan turns. To reduce the rotations, it should be connected to a speed controller, either through a port on the motherboard that supports this function. Usually, the higher the rotations, the greater the flow but also the noise. As long as the needs for noise and air flow are covered, the rotations do not need to be taken into account.
Noise Level (Max)
25 dB

Noise Level (Max)

The noise produced by the fan when operating at maximum speed.

A medium noise fan produces 20-28dB, while those below 20dB are considered quiet.
Connection
3-Pin, -, 4-Pin Molex

Connection

3-Pin
Plug for connecting the fan to the motherboard.

For connection to the power supply cable, an adapter to 4-Pin Molex is required.
4-Pin Molex
The standard computer fan plug for direct connection to the power supply cable.
LED Color
Without LEDs
Reverse Blade
No

Reverse Blade

Reverse blade fans reverse the airflow, allowing for intake without the interference of the frame, which reduces aerodynamic turbulence and noise. Additionally, apart from enhancing aesthetics and lighting, they make it easier to clean the blades and offer better cable management, as the wiring remains hidden behind the frame.
Air Pressure
-

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

The Akyga® AW-14A-BK is a 14 cm fan for desktop computers. Thanks to its long blades, it cools components much more effectively than a typical 12 cm fan. Despite its large size, the fan is quiet and does not disturb the peace during operation. Additionally, the fan is equipped with high-performance bearings that ensure not only a long lifespan but also trouble-free operation at maximum speed. It will also prove useful as a service unit for replacing a broken fan in an ATX power supply. A long 30 cm cable with a Molex/3-pin connector will allow for easy installation even in a large computer case. Mounting loops are also included.

Manufacturer

Manufacturer Details

Warnings & Safety Information

Main Specifications

Dimension
140 mm

Dimension

The diameter of the fan in millimeters. The larger the fan, the more effective the cooling and the quieter its operation compared to a smaller one. The most common size is 120mm, with some computer cases supporting larger sizes such as 140mm.
Colour
Black
Packaging
1 pcs

Technical Specifications

Fan Speed (Max)
1000 rpm

Fan Speed (Max)

The maximum rotations at which the fan turns. To reduce the rotations, it should be connected to a speed controller, either through a port on the motherboard that supports this function. Usually, the higher the rotations, the greater the flow but also the noise. As long as the needs for noise and air flow are covered, the rotations do not need to be taken into account.
Noise Level (Max)
25 dB

Noise Level (Max)

The noise produced by the fan when operating at maximum speed.

A medium noise fan produces 20-28dB, while those below 20dB are considered quiet.
Connection
3-Pin, -, 4-Pin Molex

Connection

3-Pin
Plug for connecting the fan to the motherboard.

For connection to the power supply cable, an adapter to 4-Pin Molex is required.
4-Pin Molex
The standard computer fan plug for direct connection to the power supply cable.
LED Color
Without LEDs
Reverse Blade
No

Reverse Blade

Reverse blade fans reverse the airflow, allowing for intake without the interference of the frame, which reduces aerodynamic turbulence and noise. Additionally, apart from enhancing aesthetics and lighting, they make it easier to clean the blades and offer better cable management, as the wiring remains hidden behind the frame.
Air Pressure
-

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

5,49 €
14,00 €   shipping cost