Skroutz.mt

FFG ETIG 200 Pulse Welding Machine Inverter TIG / MMA with Maximum Welding Current 180A and Duty Cycle 30%
Welding Machines

FFG ETIG 200 Pulse Welding Machine Inverter TIG / MMA with Maximum Welding Current 180A and Duty Cycle 30%

ETIG 200 PULSE Welding Inverter (MMA / TIG)

Specifications

  • Nominal voltage: 230 V | 50 Hz
  • Type: Pulse
  • Welding current range (MMA): 10 - 180 A
  • Welding current range (TIG): 10 - 200 A
  • Power: 7.0 kVA
  • ...

ETIG 200 PULSE Welding Inverter (MMA / TIG)

Specifications

  • Nominal voltage: 230 V | 50 Hz
  • Type: Pulse
  • Welding current range (MMA): 10 - 180 A
  • Welding current range (TIG): 10 - 200 A
  • Power: 7.0 kVA
  • Max. absorbed current: 33.5 A
  • No-load voltage (Uo): 82 V
  • Welding voltage: 27.2 V (MMA) | 18 V (TIG)
  • Rise | fall time: 0 - 15 s | 0 - 25 s
  • Pulse frequency: 0.2 -...
See full description See full description

  • Welding Current

    180

    Suitable for use in medium-thickness metal constructions and pipelines.

  • Duty Cycle

    The Duty Cycle is the portion of a ten-minute period that a welding machine can operate continuously at maximum Amperes before it needs to stop and cool down.

    2.

    For example, a welding machine with a maximum Amperage of 200 A and a Duty Cycle of 30% can operate continuously at 200 A for 3 minutes before it needs to stop.

  • Power Supply Voltage

    230

    It is the supply voltage that the machine requires from the electrical grid.

  • Power

    7

    Affects the power consumption of the machine and determines if it can be supported by the electrical network you are using.
  • See all
539 99 €
Delivery by Mon, 10 Aug
14,00 €   shipping cost
Sent from Greece
From MdTools 5.0 (50)
5.0 (50 reviews)
Greece
See Tools on the page of MdTools
Review the product
Product report

Description

Description

ETIG 200 PULSE Welding Inverter (MMA / TIG)

Specifications

  • Nominal voltage: 230 V | 50 Hz
  • Type: Pulse
  • Welding current range (MMA): 10 - 180 A
  • Welding current range (TIG): 10 - 200 A
  • Power: 7.0 kVA
  • Max. absorbed current: 33.5 A
  • No-load voltage (Uo): 82 V
  • Welding voltage: 27.2 V (MMA) | 18 V (TIG)
  • Rise | fall time: 0 - 15 s | 0 - 25 s
  • Pulse frequency: 0.2 - 200 Hz
  • Pre | post gas flow time: 0 - 5 s | 1 - 15 s
  • Cooling type: Air
  • Method: MMA | TIG
  • Duty cycle (MMA): 30%: 180A | 60%: 127A | 100%: 99A
  • Duty cycle (TIG): 30%: 200A | 60%: 141A | 100%: 110A
  • Protection level: IP21S
  • Cable: 2.5 m
  • Dimensions (LxWxH): 47.2x18.5x34.0 cm
  • Weight: 10.0 kg

Description

Portable all-purpose welding Inverter (pulse argon - pulse function, MMA, TIG, etc.). Multi-process new generation advanced IGBT technology. Hot arc start (HOT START), ANTI-STICK technology, arc force adjustment (ARC FORCE). Ampere adjustment potentiometer (A), thermal protection (THERMAL PROTECTION), machine quick connectors 35-70. Fully digital and user-friendly control panel and display. According to: EN IEC 60974-1. Enclosure protection IP21S. Ergonomic carrying handle. Suitable for use with a generator.

Included

  • TIG torch with fabric cover 4m (BINZEL WP-26)
  • Ground clamp 4mx6mm² with 35-70 quick connection
  • Gas hose 4m with connection
  • Ceramic nozzle 5, 6, 7
  • Long and short tail
  • 3 collets (1.6, 2.0, 2.4)

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Dimensions

Type
TIG, MMA

Type

TIG

Slow welding for detailed work on aluminum and stainless steel, mainly. Requires experience and connection to an external gas cylinder. Does not create "spatters".

MMA

Creates thick and strong bonds without the need for external gas supply, making it ideal for out-of-lab welding.
Welding Current (max)
180 A

Welding Current (max): 180


Suitable for use in medium-thickness metal constructions and pipelines.
Operation Cycle (max Ampere)
30 %

Operation Cycle (max Ampere)

The Duty Cycle is the portion of a ten-minute period that a welding machine can operate continuously at maximum Amperes before it needs to stop and cool down.

2.

For example, a welding machine with a maximum Amperage of 200 A and a Duty Cycle of 30% can operate continuously at 200 A for 3 minutes before it needs to stop.
Supply Voltage
230 V

Supply Voltage: 230


It is the supply voltage that the machine requires from the electrical grid.
Power
7 kVA

Power: 7


Affects the power consumption of the machine and determines if it can be supported by the electrical network you are using.

Additional Features

Inverter
Yes

Inverter


New technology welding. Very good in terms of performance, durability, and weight, but with a high cost of repair in case of damage. They have automation for better and safer work. If connected to a generator, it is recommended to choose one with 8kVA or more.
IGBT
Yes

IGBT


Allows the conversion of direct current (DC) voltage to alternating current (AC) or the output of direct current at a higher or lower intensity.
VRD
No
with Voltage Stabilizer
No
for Generator with AVR
No

Features

Hot Start
Yes

Hot Start


Temporarily increases the current intensity at the moment of welding initiation.
Anti Stick
Yes

Anti Stick


Cuts off the current if the electrode sticks to the metal, to prevent it from burning.
Arc Force
Yes

Arc Force


Helps in the stability of the arc during welding.
2T Operation
No
4T Mode
No
Spot Function
No
Pulsed
Yes

Pulsed


Instead of remaining constant during welding, the current increases and decreases in pulses at specified time intervals.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

ETIG 200 PULSE Welding Inverter (MMA / TIG)

Specifications

  • Nominal voltage: 230 V | 50 Hz
  • Type: Pulse
  • Welding current range (MMA): 10 - 180 A
  • Welding current range (TIG): 10 - 200 A
  • Power: 7.0 kVA
  • Max. absorbed current: 33.5 A
  • No-load voltage (Uo): 82 V
  • Welding voltage: 27.2 V (MMA) | 18 V (TIG)
  • Rise | fall time: 0 - 15 s | 0 - 25 s
  • Pulse frequency: 0.2 - 200 Hz
  • Pre | post gas flow time: 0 - 5 s | 1 - 15 s
  • Cooling type: Air
  • Method: MMA | TIG
  • Duty cycle (MMA): 30%: 180A | 60%: 127A | 100%: 99A
  • Duty cycle (TIG): 30%: 200A | 60%: 141A | 100%: 110A
  • Protection level: IP21S
  • Cable: 2.5 m
  • Dimensions (LxWxH): 47.2x18.5x34.0 cm
  • Weight: 10.0 kg

Description

Portable all-purpose welding Inverter (pulse argon - pulse function, MMA, TIG, etc.). Multi-process new generation advanced IGBT technology. Hot arc start (HOT START), ANTI-STICK technology, arc force adjustment (ARC FORCE). Ampere adjustment potentiometer (A), thermal protection (THERMAL PROTECTION), machine quick connectors 35-70. Fully digital and user-friendly control panel and display. According to: EN IEC 60974-1. Enclosure protection IP21S. Ergonomic carrying handle. Suitable for use with a generator.

Included

  • TIG torch with fabric cover 4m (BINZEL WP-26)
  • Ground clamp 4mx6mm² with 35-70 quick connection
  • Gas hose 4m with connection
  • Ceramic nozzle 5, 6, 7
  • Long and short tail
  • 3 collets (1.6, 2.0, 2.4)

Manufacturer

Manufacturer Details

Warnings & Safety Information

Dimensions

Type
TIG, MMA

Type

TIG

Slow welding for detailed work on aluminum and stainless steel, mainly. Requires experience and connection to an external gas cylinder. Does not create "spatters".

MMA

Creates thick and strong bonds without the need for external gas supply, making it ideal for out-of-lab welding.
Welding Current (max)
180 A

Welding Current (max): 180


Suitable for use in medium-thickness metal constructions and pipelines.
Operation Cycle (max Ampere)
30 %

Operation Cycle (max Ampere)

The Duty Cycle is the portion of a ten-minute period that a welding machine can operate continuously at maximum Amperes before it needs to stop and cool down.

2.

For example, a welding machine with a maximum Amperage of 200 A and a Duty Cycle of 30% can operate continuously at 200 A for 3 minutes before it needs to stop.
Supply Voltage
230 V

Supply Voltage: 230


It is the supply voltage that the machine requires from the electrical grid.
Power
7 kVA

Power: 7


Affects the power consumption of the machine and determines if it can be supported by the electrical network you are using.

Additional Features

Inverter
Yes

Inverter


New technology welding. Very good in terms of performance, durability, and weight, but with a high cost of repair in case of damage. They have automation for better and safer work. If connected to a generator, it is recommended to choose one with 8kVA or more.
IGBT
Yes

IGBT


Allows the conversion of direct current (DC) voltage to alternating current (AC) or the output of direct current at a higher or lower intensity.
VRD
No
with Voltage Stabilizer
No
for Generator with AVR
No

Features

Hot Start
Yes

Hot Start


Temporarily increases the current intensity at the moment of welding initiation.
Anti Stick
Yes

Anti Stick


Cuts off the current if the electrode sticks to the metal, to prevent it from burning.
Arc Force
Yes

Arc Force


Helps in the stability of the arc during welding.
2T Operation
No
4T Mode
No
Spot Function
No
Pulsed
Yes

Pulsed


Instead of remaining constant during welding, the current increases and decreases in pulses at specified time intervals.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

539,99 €
14,00 €   shipping cost