The Master Electric SD-V10/R rail-mounted dimmer controls devices that accept a 0/1–10 V signal, such as dimmable LED panels, dimmable drivers and inverters. Brightness can be adjusted locally on the device or using a push button, and remotely via the MASTER Smart Home app over Wi-Fi or mobile data. The app also lets you set the minimum brightness level for dimmable LED lamps.
To operate the device using a push button, press briefly to switch it on or off, or press and hold to adjust the brightness. The device supports voice commands via Google Assistant and Amazon Alexa, weekly scheduling and automatic firmware updates. No hub is required.
- Type: Rail-mounted dimmer
- Operating voltage: 180–230 V AC
- Rated voltage: 10 V
- Mains frequency: 50 Hz
- Output signal: 0/1–10 V, up to 50 mA
- Channels: 1
- Wi-Fi connection: 2.4 GHz
- Maximum number of controlled devices: 50 drivers and controllers per installation
- Functions: Soft start, local control and remote control
- Push-button operation: Brief press for ON/OFF and press and hold for dimming
- Minimum brightness setting: Via the MASTER Smart Home app
- App: MASTER Smart Home for smartphone, tablet or PC
- Voice control: Google Assistant and Amazon Alexa
- Scheduling: Weekly
- Firmware updates: Automatic
- Protection: Electronic overvoltage and overtemperature protection with automatic reset
- Operating temperature: -20 °C to +50 °C
- Storage temperature: -20 °C to +60 °C
- Wire terminals: For solid and stranded wires with a diameter of 0.5–3.5 mm
- Mounting: Clips onto a 35 × 7.5 mm rail (DIN 45277)
- Standards: EN 60669-1, EN 60669-2-1, EN 301 489-1, EN 301 489-17, EN 300 328, EN 62311
Specifications
- Panel Switches Type
- Dimmer
- Nominal Voltage
- 10 V
Features & Functions
- WiFi
- Yes
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.