TWO-COMPONENT EPOXY PRIMER

Two-component epoxy primer, ideal for use in areas above and below the waterline for boats made of polyester, wood, steel, aluminum, etc. Offers strong anti-corrosive protection for metal and wooden surfaces as well as strong anti-osmotic protection for GRP boats.

• Application surfaces: Capable of providing strong anti-corrosive and anti-osmotic protection for GRP boats.
• Coverage: 8-12 m²/L per coat.
• Application: By roller, brush, or airless spray gun.
• Dilution: Use T-400 thinner at a rate of up to 10% if necessary.
• Tool cleaning: Clean tools with T-400 thinner immediately after use.
• Drying: Touch dry in 1-4 hours depending on weather conditions.
• Re-coating: Consult the detailed technical guide from Eumaria.
• Mixing ratio (by volume): 4:1.
• Shades: Grey 8660, White 8610.
• Pack sizes: 750 ml, 3.5 ltr, 20 ltr.

Instructions:

• The surface must be completely clean and dry at the time of application.
• The temperature must be above the dew point to avoid moisture condensation.
• Carefully stir component A and add component B while stirring.
• After mixing, allow the mixture to react for 10 minutes.
• After 6 hours, the mixture cannot be used.