Skroutz.mt

Solo Battery Powered Pulse Sander 18V with Suction System YT-82751
Sanders

Solo Battery Powered Pulse Sander 18V with Suction System YT-82751

The Yato YT-82751 orbital sander is powered by an 18 V battery and is used for sanding with sandpaper sheets or sandpaper from a roll. The sanding base measures 187 x 90 mm and has a 2 mm oscillation...

The Yato YT-82751 orbital sander is powered by an 18 V battery and is used for sanding with sandpaper sheets or sandpaper from a roll. The sanding base measures 187 x 90 mm and has a 2 mm oscillation stroke. It can be connected to a vacuum cleaner to extract dust.

  • Power supply: Battery
  • Voltage: 18 V
  • Speed: 13,000 rpm
  • Oscillation stroke: 2 mm
  • Sandpaper...
See full description See full description

Top specs

  • Number of Batteries 0
  • Ah 2 Ah

  • Oscillation Range

    Refers to the amount/length of the back-and-forth or up-and-down movement of the disc or base (greater range removes more material, smaller range provides a more precise finish).

    2

    Very fine sanding, sensitive materials, finishing.

  • RPM (Revolutions Per Minute)

    • High speeds → fast material removal
    • Low speeds → finer, more controlled finish

  • Velcro

    The abrasive pads can be attached with Velcro (hook-and-loop fastener).

    1
  • See all
46 53 €
Delivery by Thu, 12 Nov
14,00 €   shipping cost
Sent from Greece
From Vidakatsavidi 4.9 (8)
4.9 (8 reviews)
Greece
3 pieces
See Power Tools on the page of Vidakatsavidi

Shop selection criteria

Why do we recommend buying from this shop?

We don’t only look at the price. We weigh different factors to find an offer that combines a good price, fast delivery and a reliable purchase.

  • Product price

    We calculate the total price you will pay and any discounts available from the shop.

  • Shipping & delivery time

    We check how quickly the product can be shipped and when you will receive it, based on your address.

  • Shop reliability

    We look at how often shops complete their orders successfully and how consistently they serve their customers.

  • Official reseller

    Where available, we take into account whether the shop is an official reseller of the brand.

Learn more about invoicing
Review the product
Product report

Description

Description

The Yato YT-82751 orbital sander is powered by an 18 V battery and is used for sanding with sandpaper sheets or sandpaper from a roll. The sanding base measures 187 x 90 mm and has a 2 mm oscillation stroke. It can be connected to a vacuum cleaner to extract dust.

  • Power supply: Battery
  • Voltage: 18 V
  • Speed: 13,000 rpm
  • Oscillation stroke: 2 mm
  • Sandpaper dimensions: 187 x 90 mm
  • Sandpaper type: Sheets or roll
  • Dust extraction system: Vacuum cleaner connection
  • Package contents: Dust bag and sanding sheet

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Specifications

Type
Pulse Sander

Type

Pulse Sander

For smoothing large surfaces with rectangular sanding base.
Power Source
Battery

Power Source

The method of supplying power to the tool.
Oscillation Range
2 mm

Oscillation Range: 2

Refers to the amount/length of the back-and-forth or up-and-down movement of the disc or base (greater range removes more material, smaller range provides a more precise finish).


Very fine sanding, sensitive materials, finishing.
Palm Sander
No

Palm Sander

Ergonomic sander that can be easily held by hand, without the need for special support or handles.

Battery Specifications

Number of Batteries
0
Volt
18 V
Ah
2 Ah

Features & Functions

Dust Suction System
Yes

Dust Suction System

Used for collecting residues during the operation of the tool.
Speed Setting
No

Speed Setting

Ability to control the rotation speed of the tool.
Turns
13000 rpm

Turns

  • High speeds → fast material removal
  • Low speeds → finer, more controlled finish
Noise
3 dB
Brushless
No

Brushless

Motor without brushes, offering greater autonomy and longer lifespan.
Water Supply
No
Soft Start
No

Soft Start

Controls the increase in motor speed when the tool is activated. Instead of starting abruptly at maximum speed, the sander gradually increases its speed over 1–2 seconds.
Brake
No

Brake

Immediately stops the disc when the tool is switched off, for safety and easy abrasive change.
Connection with Vacuum
Yes

Sandpaper / Belt Specifications

Sandpaper Dimensions
187x90 mm
Velcro
Yes

Velcro

The abrasive pads can be attached with Velcro (hook-and-loop fastener).

Accessories

Carrying Case
Without
Handle Included
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

The Yato YT-82751 orbital sander is powered by an 18 V battery and is used for sanding with sandpaper sheets or sandpaper from a roll. The sanding base measures 187 x 90 mm and has a 2 mm oscillation stroke. It can be connected to a vacuum cleaner to extract dust.

  • Power supply: Battery
  • Voltage: 18 V
  • Speed: 13,000 rpm
  • Oscillation stroke: 2 mm
  • Sandpaper dimensions: 187 x 90 mm
  • Sandpaper type: Sheets or roll
  • Dust extraction system: Vacuum cleaner connection
  • Package contents: Dust bag and sanding sheet

Manufacturer

Manufacturer Details

Warnings & Safety Information

Specifications

Type
Pulse Sander

Type

Pulse Sander

For smoothing large surfaces with rectangular sanding base.
Power Source
Battery

Power Source

The method of supplying power to the tool.
Oscillation Range
2 mm

Oscillation Range: 2

Refers to the amount/length of the back-and-forth or up-and-down movement of the disc or base (greater range removes more material, smaller range provides a more precise finish).


Very fine sanding, sensitive materials, finishing.
Palm Sander
No

Palm Sander

Ergonomic sander that can be easily held by hand, without the need for special support or handles.

Battery Specifications

Number of Batteries
0
Volt
18 V
Ah
2 Ah

Features & Functions

Dust Suction System
Yes

Dust Suction System

Used for collecting residues during the operation of the tool.
Speed Setting
No

Speed Setting

Ability to control the rotation speed of the tool.
Turns
13000 rpm

Turns

  • High speeds → fast material removal
  • Low speeds → finer, more controlled finish
Noise
3 dB
Brushless
No

Brushless

Motor without brushes, offering greater autonomy and longer lifespan.
Water Supply
No
Soft Start
No

Soft Start

Controls the increase in motor speed when the tool is activated. Instead of starting abruptly at maximum speed, the sander gradually increases its speed over 1–2 seconds.
Brake
No

Brake

Immediately stops the disc when the tool is switched off, for safety and easy abrasive change.
Connection with Vacuum
Yes

Sandpaper / Belt Specifications

Sandpaper Dimensions
187x90 mm
Velcro
Yes

Velcro

The abrasive pads can be attached with Velcro (hook-and-loop fastener).

Accessories

Carrying Case
Without
Handle Included
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

46,53 €
14,00 €   shipping cost
Yato