Water-repellent, colored, resinous, cementitious grout with porcelain texture CG2 WA. It is characterized by high water repellency, high mechanical strength, and color stability. It contains special bacteriostatic components that prevent bacteria growth in the joint.

Suitable for grouting wall or floor tiles of any kind, for indoor or outdoor areas. Provides a smooth and glossy final surface. Suitable for joint widths from 1 to 8 mm.

Fields of application:

• Suitable for contact with food
• Suitable for contact with drinking water

Consumption: 0.2-2.0 kg/m², depending on the tile dimensions and joint width.

Method of use:

• Substrate: The tiled surface must be clean. The joints are carefully cleaned and moistened with a wet sponge.
• Application: Add MULTIFILL-SMALTO 1-8 to water while stirring until a homogeneous mixture is obtained. It is recommended to mix with a low-speed mixer (drill). Let the mixture mature for about 3 minutes and stir again. Spread the mixture over the joints with a rubber spatula, diagonally to the joints, ensuring they are filled to their entire depth. Remove excess material after a while with a wet sponge. Finally, clean the tile surface with a dry cloth.

In outdoor areas or when the temperature is high, it is recommended to moisten the joints after a few hours once the grout has dried.

The product contains cement, which reacts alkalinely with water and is classified as an irritant. Consult the safe use and precautionary instructions on the packaging.