Skroutz.mt

Neumann KH 120 II Studio Monitor Speaker 5.25" 245W White Piece
Studio Monitor Speakers

Neumann KH 120 II Studio Monitor Speaker 5.25" 245W White Piece

Product Features

  • High precision drivers
  • Mathematically modeled Dispersion waveguide (MMD)
  • Linear frequency response: 44 Hz … 21 kHz (3 dB)
  • Linear phase response: 120 Hz … 16 kHz (45°) with delay
  • ...

Product Features

  • High precision drivers
  • Mathematically modeled Dispersion waveguide (MMD)
  • Linear frequency response: 44 Hz … 21 kHz (3 dB)
  • Linear phase response: 120 Hz … 16 kHz (45°) with delay
  • Internal DSP for adaptive room alignment
  • Razor-sharp imaging due to extremely low tolerances (0.5 dB)
  • Combination with other speakers of the KH line for immersive...
See full description See full description
The product is not available for shipping to the selected country.
Review the product
Product report

Description

Description

Product Features

  • High precision drivers
  • Mathematically modeled Dispersion waveguide (MMD)
  • Linear frequency response: 44 Hz … 21 kHz (±3 dB)
  • Linear phase response: 120 Hz … 16 kHz (±45°) with delay
  • Internal DSP for adaptive room alignment
  • Razor-sharp imaging due to extremely low tolerances (±0.5 dB)
  • Combination with other speakers of the KH line for immersive setups
  • Fields of use: Recording, Post-production, Broadcast, Music creation

Specifications

  • Free field frequency response ±3 dB: 44 Hz ... 21 kHz
  • Self-generated noise at 10 cm with input gain set to 100 dB SPL
  • Maximum SPL calculated in half space at 3% THD at 1 m: 116.8 dB SPL
  • Acoustical Principle: Bass reflex, Ports at the front
  • Analog inputs XLR: analog electronically balanced
  • Analog input impedance: 24k Ohms
  • Digital input: RCA (75 Ω): S/PDIF
  • Input gain control: 0 dB ... -15 dB
  • Output level control: 94; 100; 108; 114 dB SPL
  • Bass Equalization: 0; -2; -4; -6 dB
  • Low-mid Equalization: 0; -2; -4; -6 dB
  • High Equalization: +1; 0; -1; -2 dB
  • Control: Local; Network
  • Crossover frequency: 1.7 kHz
  • FIR phase correction: Linear phase (120 Hz ... 16 kHz; +/- 45°)
  • Protection circuit: Independent soft clip, peak and thermo limiters
  • AES67 Audio-over-IP Interface: Fully redundant AES67 ST2110 compliant
  • Woofer amplifier output power: 145 W (THD+N)
  • Tweeter amplifier output power: 100 W (THD+N)
  • Woofer: 130 mm (5.25") with protective metal grille
  • Tweeter: 25 mm (1") with protective metal grille
  • Product dimensions: 287 x 182 x 227 mm
  • Product weight: 5.4 kg

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Technical Specifications

Power (RMS)
245 W
Bass Driver
5.25 "

Bass Driver

The speaker that handles the low frequencies. It affects the depth, balance, and accuracy of the bass in the mix.
Max SPL
116.8 dB

Max SPL

The maximum sound level that the monitor can deliver without distortion, important for accurate listening at high volumes.
Driver Configuration
2 No of Drivers

Driver Configuration

The way the monitor divides frequencies among its speakers (e.g. 2-way or 3-way), for more accurate and clear reproduction.

2

The sound frequencies are reproduced by two speakers, a tweeter for the highs and a woofer for the lows.
Tweeter Size
1 "
Frequency Response
4 - 21000 Hz

Frequency Response

Shows how accurately and evenly the speaker reproduces all frequencies. In studio monitors, the response is usually more “flat” (neutral), so the sound is delivered faithfully without boosting bass or treble, which is ideal for mixing and mastering.
DSP
Yes

DSP

Digital signal processing that enhances the sound, automatically adjusts elements such as EQ, filters, or acoustic adaptation according to the space.

Main Specifications

Quantity
Piece
Type
Active

Type

Active: It has a built-in amplifier, you just connect it and it works. It is the most common choice for studio monitors.

Passive: Requires an external amplifier to operate. It offers greater flexibility in setup, but needs additional equipment.
Weight
5.4 kg
Colour
White
Connectivity
Ethernet, RCA, XLR

Dimensions

Height
28.7 cm
Width
18.2 cm
Length
22.7 cm

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

Product Features

  • High precision drivers
  • Mathematically modeled Dispersion waveguide (MMD)
  • Linear frequency response: 44 Hz … 21 kHz (±3 dB)
  • Linear phase response: 120 Hz … 16 kHz (±45°) with delay
  • Internal DSP for adaptive room alignment
  • Razor-sharp imaging due to extremely low tolerances (±0.5 dB)
  • Combination with other speakers of the KH line for immersive setups
  • Fields of use: Recording, Post-production, Broadcast, Music creation

Specifications

  • Free field frequency response ±3 dB: 44 Hz ... 21 kHz
  • Self-generated noise at 10 cm with input gain set to 100 dB SPL
  • Maximum SPL calculated in half space at 3% THD at 1 m: 116.8 dB SPL
  • Acoustical Principle: Bass reflex, Ports at the front
  • Analog inputs XLR: analog electronically balanced
  • Analog input impedance: 24k Ohms
  • Digital input: RCA (75 Ω): S/PDIF
  • Input gain control: 0 dB ... -15 dB
  • Output level control: 94; 100; 108; 114 dB SPL
  • Bass Equalization: 0; -2; -4; -6 dB
  • Low-mid Equalization: 0; -2; -4; -6 dB
  • High Equalization: +1; 0; -1; -2 dB
  • Control: Local; Network
  • Crossover frequency: 1.7 kHz
  • FIR phase correction: Linear phase (120 Hz ... 16 kHz; +/- 45°)
  • Protection circuit: Independent soft clip, peak and thermo limiters
  • AES67 Audio-over-IP Interface: Fully redundant AES67 ST2110 compliant
  • Woofer amplifier output power: 145 W (THD+N)
  • Tweeter amplifier output power: 100 W (THD+N)
  • Woofer: 130 mm (5.25") with protective metal grille
  • Tweeter: 25 mm (1") with protective metal grille
  • Product dimensions: 287 x 182 x 227 mm
  • Product weight: 5.4 kg

Manufacturer

Manufacturer Details

Warnings & Safety Information

Technical Specifications

Power (RMS)
245 W
Bass Driver
5.25 "

Bass Driver

The speaker that handles the low frequencies. It affects the depth, balance, and accuracy of the bass in the mix.
Max SPL
116.8 dB

Max SPL

The maximum sound level that the monitor can deliver without distortion, important for accurate listening at high volumes.
Driver Configuration
2 No of Drivers

Driver Configuration

The way the monitor divides frequencies among its speakers (e.g. 2-way or 3-way), for more accurate and clear reproduction.

2

The sound frequencies are reproduced by two speakers, a tweeter for the highs and a woofer for the lows.
Tweeter Size
1 "
Frequency Response
4 - 21000 Hz

Frequency Response

Shows how accurately and evenly the speaker reproduces all frequencies. In studio monitors, the response is usually more “flat” (neutral), so the sound is delivered faithfully without boosting bass or treble, which is ideal for mixing and mastering.
DSP
Yes

DSP

Digital signal processing that enhances the sound, automatically adjusts elements such as EQ, filters, or acoustic adaptation according to the space.

Main Specifications

Quantity
Piece
Type
Active

Type

Active: It has a built-in amplifier, you just connect it and it works. It is the most common choice for studio monitors.

Passive: Requires an external amplifier to operate. It offers greater flexibility in setup, but needs additional equipment.
Weight
5.4 kg
Colour
White
Connectivity
Ethernet, RCA, XLR

Dimensions

Height
28.7 cm
Width
18.2 cm
Length
22.7 cm

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.