Skroutz.mt

Plus 4XP 2/14 Pump Drilling (without Motor) 230223
Submersible Water Pumps

Plus 4XP 2/14 Pump Drilling (without Motor) 230223

Submersible Pump 1HP 4XP 2/14 4 inches PLUS.

Suitable for domestic, urban or industrial use for irrigation and more.

  • Overall pump outer diameter: 4 inches
  • Discharge port diameter: 1 1/4 inches
  • Power...

Submersible Pump 1HP 4XP 2/14 4 inches PLUS.

Suitable for domestic, urban or industrial use for irrigation and more.

  • Overall pump outer diameter: 4 inches
  • Discharge port diameter: 1 1/4 inches
  • Power absorption: 1HP - 0.75KW
  • Water sand content: Up to 150gr/m3
  • Temperature of pumped water: Up to 40°C
  • Impeller made of Noryl plastic
  • Number of impellers: 14
  • ...
See full description See full description

  • Horsepower

    Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).

  • Power

    It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.

  • Manometric Height

    100

    The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

    • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
    • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
  • See all
Review the product
Product report

Description

Description

Submersible Pump 1HP 4XP 2/14 4 inches PLUS.

Suitable for domestic, urban or industrial use for irrigation and more.

  • Overall pump outer diameter: 4 inches
  • Discharge port diameter: 1 1/4 inches
  • Power absorption: 1HP - 0.75KW
  • Water sand content: Up to 150gr/m3
  • Temperature of pumped water: Up to 40°C
  • Impeller made of Noryl plastic
  • Number of impellers: 14
  • Manufacturer: Plus
  • Country of origin: China

Pump performance:

  • Water flow 1.8 cubic meters per hour at 88 meters head.
  • Water flow 2.4 cubic meters per hour at 74 meters head.

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Dimensions

Type
Drilling

Type

Drilling
Drilling pumps are used for pumping water or other liquids from underground boreholes (water sources) to surfaces for various purposes, such as water supply, irrigation, industrial applications
Power Source
Electric

Power Source

Electric
The power supply refers to the pump's need for electrical energy from an external power source, such as single-phase or three-phase power.
Horsepower
1 hp

Horsepower

Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).
Power
750 W

Power

It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.

Features

with Cutter Impeller
No

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
No

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Outlet Nozzle
4", 1/4"

Outlet Nozzle

The outlet nozzle refers to the point or the external diameter of the pump from which the pumped water or liquid exits. It is an important feature for determining the connection of the pump with the piping system and affects the flow capacity of the liquid.
Vortex
No

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Maximum Head Height
100 m

Maximum Head Height: 100


The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

  • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
  • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.

Materials & Construction

Set
No
Stainless
Yes

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

Submersible Pump 1HP 4XP 2/14 4 inches PLUS.

Suitable for domestic, urban or industrial use for irrigation and more.

  • Overall pump outer diameter: 4 inches
  • Discharge port diameter: 1 1/4 inches
  • Power absorption: 1HP - 0.75KW
  • Water sand content: Up to 150gr/m3
  • Temperature of pumped water: Up to 40°C
  • Impeller made of Noryl plastic
  • Number of impellers: 14
  • Manufacturer: Plus
  • Country of origin: China

Pump performance:

  • Water flow 1.8 cubic meters per hour at 88 meters head.
  • Water flow 2.4 cubic meters per hour at 74 meters head.

Manufacturer

Manufacturer Details

Warnings & Safety Information

Dimensions

Type
Drilling

Type

Drilling
Drilling pumps are used for pumping water or other liquids from underground boreholes (water sources) to surfaces for various purposes, such as water supply, irrigation, industrial applications
Power Source
Electric

Power Source

Electric
The power supply refers to the pump's need for electrical energy from an external power source, such as single-phase or three-phase power.
Horsepower
1 hp

Horsepower

Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).
Power
750 W

Power

It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.

Features

with Cutter Impeller
No

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
No

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Outlet Nozzle
4", 1/4"

Outlet Nozzle

The outlet nozzle refers to the point or the external diameter of the pump from which the pumped water or liquid exits. It is an important feature for determining the connection of the pump with the piping system and affects the flow capacity of the liquid.
Vortex
No

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Maximum Head Height
100 m

Maximum Head Height: 100


The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

  • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
  • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.

Materials & Construction

Set
No
Stainless
Yes

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

71,00 €
17,00 €   shipping cost