For 4 years I was using the Intel cooler for cooling my i7-3770. In the beginning, I had no problems with 35 degrees idle and 75+ under 100% load, and it would increase a bit more during the summer. However, over time, the situation worsened and it reached 40+ idle and 85-90 under full load, even with the case open because the processor would overheat if it was closed. That's why I decided to change the cooler before it's too late, and since I didn't want to spend a lot of money, I chose the TX3 evo due to its good reviews.
The cooler is amazing, and I'm not just saying that because of the low cost/performance ratio. The build quality is very good, and in terms of performance... idle temperatures are 29-31 and max temperatures under full load are 62-66 degrees, even with the case closed! There is also the option to add a second fan for more extreme situations. The package includes a syringe of thermal paste (with plenty of material) and the brackets to install the second fan.
The only "negative" points I have to mention are its size and installation. I will only mention the size for those who have small cases (personally, I didn't have any issues), so make sure to measure the dimensions to ensure it will fit because although it's not as big as high-end coolers, it's not an Intel low-profile cooler either. As for the installation on a socket 1151, the RAM had to be removed for installation, but I also removed the GPU/PSU to have space to work. Everything was going fine until I installed the cooler and realized that one of my RAM sticks had to go exactly underneath it, so I had to remove the cooler, install the RAM, and that's when the difficulties started because the RAM was obstructing me from securing the cooler's two legs. After a few attempts, I managed to do it, but it wasn't as easy as it seemed.
I am very satisfied with this purchase and I highly recommend it.
Εδω και 4 χρονια χρησιμοποιουσα την ψυχτρα της intel για την ψυξη του i7-3770 που εχω. Στις αρχες δεν ειχα προβληματα με 35 βαθμους idle και 75+ σε 100% λειτουργια και μου ανεβαζε λιγο παραπανω τα καλοκαιρια, αλλα λιγο λιγο η κατασταση χειροτερευε και εφτασε 40+ idle και 85-90 full load και αυτο με ανοιχτο το κουτι γιατι με κλειστο θα εβραζε ο επεξεργαστης. Γι αυτο το λογο αποφασισα να αλλαξω την ψυχτρα πριν ειναι αργα και μιας και δεν ηθελα να δωσω πολλα λεφτα επελεξα την TX3 evo λογο των καλων αξιολογησεων.
Η ψυχτρα ειναι καταπληκτικη και δεν το λεω λογο της αναλογιας μικρου κοστους/αποδοσης. Η ποιοτητα κατασκευης ειναι παρα πολυ καλη και απο αποδοση.... Idle 29-31 max και full load 62-66 βαθμους και αυτο με κλειστη τη θηκη! Υπαρχει και η επιλογη να προσθεσεις και 2ο ανεμιστηρα για πιο extreme καταστασεις. Στο κουτι εμπεριεχετε thermal paste συριγγα (με αρκετο υλικο) καθως και οι βασεις για να βαλεις τον δευτερο ανεμιστηρα.
Τα μονα "αρνητικα" που εχω να αναφερω ειναι ο ογκος της και η τοποθετηση.
Τον ογκο θα τον αναφερω μονο γι αυτους που εχουν μικρα κουτια (προσωπικα δεν ειχα θεμα), μετρηστε τις διαστασεις για να σιγουρευτειτε οτι θα χωρεσει γιατι ναι μεν δεν ειναι οσο μεγαλες ειναι οι ακριβες ψυχτρες αλλα δεν ειναι και intel low profile ψυχτρα...
Οσον αφορα την τοποθετηση σε socket 1151. Η ram επρεπε να βγει για την τοποθετηση μονο αλλα αφαιρεσα και GPU/PSU για να εχω χωρο να δουλεψω. Ολα πηγαιναν μια χαρα μεχρι που εγκατεστησα την ψυχρα και ειδα οτι η μια απο τις ram μου επρεπε να μπει ακριβως απο κατω, οποτε εβγαλα την ψυχτρα, εβαλα την ram, και εκει αρχισαν τα δυσκολα μιας και η ram με εμποδιζε να ασφαλισω τα 2 ποδια της ψυχτρας. Μετα απο μερικες προσπαθειες το καταφερα αλλα δεν ηταν οσο ευκολο φαινοταν.
Ειμαι παρα πολυ ευχαριστημενος με αυτη την αγορα και την συστηνω ανεπιφυλακτα.