Skroutz.mt

Blebox Thermobox Smart Intermediate Switch Wi-Fi
Intermediate Switches

Blebox Thermobox Smart Intermediate Switch Wi-Fi

Thermostat 230V BLEBOX thermoBox IP20 WiFi 3.68kW controller designed for smart heating or cooling control with the ability to cooperate with 2 digital sensors.

  • Type of outputs: relay, galvanic...

Thermostat 230V BLEBOX thermoBox IP20 WiFi 3.68kW controller designed for smart heating or cooling control with the ability to cooperate with 2 digital sensors.

  • Type of outputs: relay, galvanic isolation
  • Maximum load: 16A / 230V AC, 16A / 24V DC
  • Type of control inputs: temperature measuring sensor
  • Measurement range: from -55°C to 125°C
  • Measurement accuracy:...
See full description See full description

  • Connectivity

    Wi-Fi

    The most common connectivity option for individual switches, as it connects directly to the router.

  • Usage

    Water heater

    Specifically designed for managing high loads such as a water heater.

  • Maximum Load

    It is the maximum amount of current that the switch can withstand without burning out. It shows you how many or how powerful devices you can connect: for simple lights, 10A is enough, while for power-hungry devices (such as a water heater) more Amperes are required.

    For example, a typical LED bulb (e.g. 10W) draws very little current, about 0.04 Amperes. This means that a standard smart switch of 10A is more than sufficient for its operation.
  • Dimensions 41.5x47x12mm
  • See all
Review the product
Product report

Description

Description

Thermostat 230V BLEBOX thermoBox IP20 WiFi 3.68kW controller designed for smart heating or cooling control with the ability to cooperate with 2 digital sensors.

  • Type of outputs: relay, galvanic isolation
  • Maximum load: 16A / 230V AC, 16A / 24V DC
  • Type of control inputs: temperature measuring sensor
  • Measurement range: from -55°C to 125°C
  • Measurement accuracy: ± 0.5°C in the range from -10°C to 85°C
  • Dimensions: 41.5 x 47 x 12 mm (width x height x length)
  • Housing: made of halogen-free polyurethane composite, self-extinguishing for thermal category B (130°C)
  • Degree of protection: IP20
  • Installation method: in a recessed box (deep or double), in the housing of the receiver - e.g. heater, air conditioner
  • Operating temperature of the controller: from -20°C to 50°C
  • Transmission standard: WiFi, compatible with WiFi 802.1

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Specifications

Switch Type
Smart Switch
Usage
Water heater

Usage

Water heater

Specifically designed for managing high loads such as a water heater.
Dimensions (Spec Summary)
41.5x47x12mm

Smart Attributes

Connectivity
Wi-Fi

Connectivity

Wi-Fi

The most common connectivity option for individual switches, as it connects directly to the router.

Additional Features

With Remote Control
No

With Remote Control

It allows you to control the switch remotely with a remote control, without needing your smartphone.
Maximum Load
16 A

Maximum Load

It is the maximum amount of current that the switch can withstand without burning out. It shows you how many or how powerful devices you can connect: for simple lights, 10A is enough, while for power-hungry devices (such as a water heater) more Amperes are required.

For example, a typical LED bulb (e.g. 10W) draws very little current, about 0.04 Amperes. This means that a standard smart switch of 10A is more than sufficient for its operation.
Pieces
1

Features

Dimmer
No

Dimmer

It allows you to adjust the brightness of the lighting instead of simple on/off operation. Bulbs that support dimmable function are required.
Dry Contact
No

Dry Contact

Dry Contact. It gives you the ability to safely control devices that have their own power supply. It does not transfer current but allows you to control them remotely, without causing a short circuit or damage.
Consumption Measurement
No

Consumption Measurement

It allows you to see in real time how much electricity your connected device is consuming and to keep a usage history, through your smartphone and the compatible app.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

Thermostat 230V BLEBOX thermoBox IP20 WiFi 3.68kW controller designed for smart heating or cooling control with the ability to cooperate with 2 digital sensors.

  • Type of outputs: relay, galvanic isolation
  • Maximum load: 16A / 230V AC, 16A / 24V DC
  • Type of control inputs: temperature measuring sensor
  • Measurement range: from -55°C to 125°C
  • Measurement accuracy: ± 0.5°C in the range from -10°C to 85°C
  • Dimensions: 41.5 x 47 x 12 mm (width x height x length)
  • Housing: made of halogen-free polyurethane composite, self-extinguishing for thermal category B (130°C)
  • Degree of protection: IP20
  • Installation method: in a recessed box (deep or double), in the housing of the receiver - e.g. heater, air conditioner
  • Operating temperature of the controller: from -20°C to 50°C
  • Transmission standard: WiFi, compatible with WiFi 802.1

Manufacturer

Manufacturer Details

Warnings & Safety Information

Specifications

Switch Type
Smart Switch
Usage
Water heater

Usage

Water heater

Specifically designed for managing high loads such as a water heater.
Dimensions (Spec Summary)
41.5x47x12mm

Smart Attributes

Connectivity
Wi-Fi

Connectivity

Wi-Fi

The most common connectivity option for individual switches, as it connects directly to the router.

Additional Features

With Remote Control
No

With Remote Control

It allows you to control the switch remotely with a remote control, without needing your smartphone.
Maximum Load
16 A

Maximum Load

It is the maximum amount of current that the switch can withstand without burning out. It shows you how many or how powerful devices you can connect: for simple lights, 10A is enough, while for power-hungry devices (such as a water heater) more Amperes are required.

For example, a typical LED bulb (e.g. 10W) draws very little current, about 0.04 Amperes. This means that a standard smart switch of 10A is more than sufficient for its operation.
Pieces
1

Features

Dimmer
No

Dimmer

It allows you to adjust the brightness of the lighting instead of simple on/off operation. Bulbs that support dimmable function are required.
Dry Contact
No

Dry Contact

Dry Contact. It gives you the ability to safely control devices that have their own power supply. It does not transfer current but allows you to control them remotely, without causing a short circuit or damage.
Consumption Measurement
No

Consumption Measurement

It allows you to see in real time how much electricity your connected device is consuming and to keep a usage history, through your smartphone and the compatible app.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

94,85 €
14,00 €   shipping cost