Skroutz.mt

LS2 OF606 Drifter Devor Matt Black/H-V Yellow Motorcycle Helmet Modular ECE 22.06 1300gr
Motorcycle Helmets

LS2 OF606 Drifter Devor Matt Black/H-V Yellow Motorcycle Helmet Modular ECE 22.06 1300gr Code: 36606 22 54

Helmet LS2 DRIFTER OF606 ECE 22.06 DEVOR MATT BLACK H-V YELLOW. The LS2 Drifter is a helmet made from KPA (Kinetic Polymer Alloy).

Helmet LS2 DRIFTER OF606 ECE 22.06 DEVOR MATT BLACK H-V YELLOW. The LS2 Drifter is a helmet made from KPA (Kinetic Polymer Alloy).

See full description See full description

  • Type

    Modular

    Modular helmets are a combination of a full-face and a jet helmet. They have a mechanism that opens the front part of the helmet, turning it into a jet helmet. They are easy to wear and safer than jet helmets, but less safe than full-face helmets as the helmet breaks into two pieces. The difference between them and Flip-Up helmets is that the lower part is completely removed and does not remain on the helmet. During driving, the front part of the helmet must be closed, and during stops, it can be lifted.

  • Material

    Thermoplastic

    This is a plastic material mainly used in more affordable and entry-level helmets.

    Thermoplastic shells, such as Polycarbonate or ABS, offer basic protection through deformation upon impact, with greater weight and lower production cost compared to composite materials.

  • Certification

    Certification refers to the official inspection that confirms the helmet meets specific safety standards as defined by international organizations (e.g., ECE, DOT). It is an indication that the helmet has been tested and approved for its ability to protect in real collision conditions.

    ECE 22.06

    New European-type safety specification certification "ECE 22.06", which ensures that the helmet is tested at 18 impact check points instead of 6 as was previously the case. It is now considered the most modern and comprehensive standard for helmet safety in Europe.

  • Pinlock (Anti-fog Film)

    Not Supported

    It is not compatible with the Pinlock system, so it cannot be installed. In this case, the helmet does not have the fittings for adding the Pinlock inner visor, which means there is no special protection against fogging or misting of the visor.
  • Color Finish Matt
  • See all

Size

LS2 size guide
LS2 size guide

Size

LS2 size guide
International
Product report

Description

Description

Helmet LS2 DRIFTER OF606 ECE 22.06 DEVOR MATT BLACK H-V YELLOW. The LS2 Drifter is a helmet made from KPA (Kinetic Polymer Alloy).

SkuDescription|Brand

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Number
36606 22 54

Dimensions

Type
Modular

Type

Modular

Modular helmets are a combination of a full-face and a jet helmet. They have a mechanism that opens the front part of the helmet, turning it into a jet helmet. They are easy to wear and safer than jet helmets, but less safe than full-face helmets as the helmet breaks into two pieces. The difference between them and Flip-Up helmets is that the lower part is completely removed and does not remain on the helmet. During driving, the front part of the helmet must be closed, and during stops, it can be lifted.
Weight (+/-50 gr)
1300 gr

Weight (+/-50 gr)

Most helmets weigh around 1500gr and some can reach up to 1800gr. Additionally, the material is also an important factor for the weight of the helmet, with carbon helmets being considered lighter.
Colour
Black
Color Finish
Matt
Material
Thermoplastic

Material

Thermoplastic

This is a plastic material mainly used in more affordable and entry-level helmets.

Thermoplastic shells, such as Polycarbonate or ABS, offer basic protection through deformation upon impact, with greater weight and lower production cost compared to composite materials.
Clasp
Microlock

Clasp

Microlock

The helmet has a retractable mechanism that fastens on the other side. 2. With this mechanism, we can easily put on and take off the helmet. 3. Compared to the Double D ring, it is less durable and more prone to breakage.
Certification
ECE 22.06

Certification

Certification refers to the official inspection that confirms the helmet meets specific safety standards as defined by international organizations (e.g., ECE, DOT). It is an indication that the helmet has been tested and approved for its ability to protect in real collision conditions.

ECE 22.06

New European-type safety specification certification "ECE 22.06", which ensures that the helmet is tested at 18 impact check points instead of 6 as was previously the case. It is now considered the most modern and comprehensive standard for helmet safety in Europe.
Pinlock (Anti-fog Film)
Not Supported

Pinlock (Anti-fog Film)

Not Supported

It is not compatible with the Pinlock system, so it cannot be installed. In this case, the helmet does not have the fittings for adding the Pinlock inner visor, which means there is no special protection against fogging or misting of the visor.

Extra Features

Removable / Washable Interior
Yes

Removable / Washable Interior

The helmet's interior lining can be removed and washed.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Reviews (2)

Reviews

4.0
2
4.0
Review this product
  1. 1
  2. 4 stars
    0
  3. 1
  4. 2 stars
    0
  5. 1 star
    0
Review this product

Reviews by our members

  • par_dermi
    3
    2 out of 2 members found this review helpful
    par_dermi
    This review is about the colour: White

    I give it a 3 for the following reason. On the upper air vents, they haven't properly opened the holes in the helmet shell, it's a sloppy job—I’ll take a photo at some point. Overall though, it's a nice helmet but noisy, especially with the visor; if you remove it, it's less noisy. Especially now in the summer, it helped that the visor can be removed. Inside the box, there is also a second tinted visor.

    Translated from Greek ·
    • Application
    • Visibility
    • Weight
    • Ventilation
    • Construction quality
    • High aerodynamic noise
    • Value for money
    Did you find this review helpful?
  • 5
    Mevento

    Verified purchase

  • par_dermi
    3
    par_dermi

    I give it a 3 for the following reason. On the upper air vents, they haven't properly opened the holes in the helmet shell, it's a sloppy job—I’ll take a photo at some point. Overall though, it's a nice helmet but noisy, especially with the visor; if you remove it, it's less noisy. Especially now in the summer, it helped that the visor can be removed. Inside the box, there is also a second tinted visor.

    Translated from Greek ·
    2
  • 5
    Mevento

    0
  • See all

Description & Specifications

Helmet LS2 DRIFTER OF606 ECE 22.06 DEVOR MATT BLACK H-V YELLOW. The LS2 Drifter is a helmet made from KPA (Kinetic Polymer Alloy).

SkuDescription|Brand

Manufacturer Details

Warnings & Safety Information
Product Number
36606 22 54

Dimensions

Type
Modular

Type

Modular

Modular helmets are a combination of a full-face and a jet helmet. They have a mechanism that opens the front part of the helmet, turning it into a jet helmet. They are easy to wear and safer than jet helmets, but less safe than full-face helmets as the helmet breaks into two pieces. The difference between them and Flip-Up helmets is that the lower part is completely removed and does not remain on the helmet. During driving, the front part of the helmet must be closed, and during stops, it can be lifted.
Weight (+/-50 gr)
1300 gr

Weight (+/-50 gr)

Most helmets weigh around 1500gr and some can reach up to 1800gr. Additionally, the material is also an important factor for the weight of the helmet, with carbon helmets being considered lighter.
Colour
Black
Color Finish
Matt
Material
Thermoplastic

Material

Thermoplastic

This is a plastic material mainly used in more affordable and entry-level helmets.

Thermoplastic shells, such as Polycarbonate or ABS, offer basic protection through deformation upon impact, with greater weight and lower production cost compared to composite materials.
Clasp
Microlock

Clasp

Microlock

The helmet has a retractable mechanism that fastens on the other side. 2. With this mechanism, we can easily put on and take off the helmet. 3. Compared to the Double D ring, it is less durable and more prone to breakage.
Certification
ECE 22.06

Certification

Certification refers to the official inspection that confirms the helmet meets specific safety standards as defined by international organizations (e.g., ECE, DOT). It is an indication that the helmet has been tested and approved for its ability to protect in real collision conditions.

ECE 22.06

New European-type safety specification certification "ECE 22.06", which ensures that the helmet is tested at 18 impact check points instead of 6 as was previously the case. It is now considered the most modern and comprehensive standard for helmet safety in Europe.
Pinlock (Anti-fog Film)
Not Supported

Pinlock (Anti-fog Film)

Not Supported

It is not compatible with the Pinlock system, so it cannot be installed. In this case, the helmet does not have the fittings for adding the Pinlock inner visor, which means there is no special protection against fogging or misting of the visor.

Extra Features

Removable / Washable Interior
Yes

Removable / Washable Interior

The helmet's interior lining can be removed and washed.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

Reviews (2)

4.0
2
4.0
Review this product
  1. 1
  2. 4 stars
    0
  3. 1
  4. 2 stars
    0
  5. 1 star
    0
Review this product

Reviews by our members

  • par_dermi
    3
    2 out of 2 members found this review helpful
    par_dermi
    This review is about the colour: White

    I give it a 3 for the following reason. On the upper air vents, they haven't properly opened the holes in the helmet shell, it's a sloppy job—I’ll take a photo at some point. Overall though, it's a nice helmet but noisy, especially with the visor; if you remove it, it's less noisy. Especially now in the summer, it helped that the visor can be removed. Inside the box, there is also a second tinted visor.

    Translated from Greek ·
    • Application
    • Visibility
    • Weight
    • Ventilation
    • Construction quality
    • High aerodynamic noise
    • Value for money
    Did you find this review helpful?
  • 5
    Mevento

    Verified purchase

  • par_dermi
    3
    par_dermi

    I give it a 3 for the following reason. On the upper air vents, they haven't properly opened the holes in the helmet shell, it's a sloppy job—I’ll take a photo at some point. Overall though, it's a nice helmet but noisy, especially with the visor; if you remove it, it's less noisy. Especially now in the summer, it helped that the visor can be removed. Inside the box, there is also a second tinted visor.

    Translated from Greek ·
    2
  • 5
    Mevento

    0
  • See all
155,00 €
17,00 €   shipping cost