Skroutz.mt

Karcher SP22.000 Dirt Single-phase Pump Waste Water / Sewage 750W 1.645-850.0
Submersible Water Pumps

Karcher SP22.000 Dirt Single-phase Pump Waste Water / Sewage 750W 1.645-850.0

Key features:

  • Nominal power consumption 75W
  • Maximum pumping capacity 22000l/h
  • Maximum delivery temperature 35°C
See full description

  • Voltage

    Single-Phase

    Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 

  • Power

    It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.

  • Manometric Height

    8

    The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

    • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
    • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
  • See all
Product report

Description

Description

Capabilities

The SP 22.000 Dirt is the most powerful submersible dirty water pump from Kärcher. With up to 22,000 l/h, it is ideal for particularly demanding drainage tasks, such as in large garden ponds, flooded basements, or construction pits. The pumps can handle dirt particles up to 30 mm. If larger dirt particles threaten to cause a blockage, the integrated stainless steel pre-filter can be pulled down to protect the pump impeller.

Comfort & Functionality

The sliding ring seal, also used in the Professional series, ensures an exceptionally long service life. There is even an option to extend the warranty to five years. The float switch offers additional practical functions: it automatically switches the pump on and off depending on the water level, prevents dry running, and its height can be adjusted. It can also be fixed so that the submersible pump draws water down to a depth of 35 mm during continuous operation. The Quick Connect threaded connection also allows for quick and easy connection of 1", 1 1/4", and 1 1/2" flexible hoses.

Ceramic seal

For very long lifespan


Adjustable height float switch

Increases flexibility when switching the pumps on and off and prevents dry running.


Quick Connect

Connection adapter for quick and easy connection of 1'', 1 1/4'' and 1 1/2'' hoses.

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Dimensions

Type
Waste Water / Sewage

Type

Waste Water / Sewage

Waste water / sewage pumps are used for pumping and transporting waste water, sewage, and other liquids containing solids or particles
Power Source
Electric

Power Source

Electric
The power supply refers to the pump's need for electrical energy from an external power source, such as single-phase or three-phase power.
Voltage
Single-Phase

Voltage

Single-Phase

Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 
Power
750 W

Power

It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.

Features

with Cutter Impeller
No

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
Yes

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Outlet Nozzle
1", 1 1/2", 1 1/4"

Outlet Nozzle

The outlet nozzle refers to the point or the external diameter of the pump from which the pumped water or liquid exits. It is an important feature for determining the connection of the pump with the piping system and affects the flow capacity of the liquid.
Vortex
No

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Maximum Head Height
8 m

Maximum Head Height: 8


The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

  • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
  • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
Pump Submersion Depth
7 m
Maximum Particle Size
30 mm

Maximum Particle Size

Specifies the largest size of solid particles (such as sand, stones, or other impurities) that the device can pump without clogging or being damaged.

Materials & Construction

Set
No
Stainless
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Reviews (1)

Reviews

5.0
1
5.0
Review this product
  1. 1
  2. 4 stars
    0
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1 star
    0
Review this product

Description & Specifications

Capabilities

The SP 22.000 Dirt is the most powerful submersible dirty water pump from Kärcher. With up to 22,000 l/h, it is ideal for particularly demanding drainage tasks, such as in large garden ponds, flooded basements, or construction pits. The pumps can handle dirt particles up to 30 mm. If larger dirt particles threaten to cause a blockage, the integrated stainless steel pre-filter can be pulled down to protect the pump impeller.

Comfort & Functionality

The sliding ring seal, also used in the Professional series, ensures an exceptionally long service life. There is even an option to extend the warranty to five years. The float switch offers additional practical functions: it automatically switches the pump on and off depending on the water level, prevents dry running, and its height can be adjusted. It can also be fixed so that the submersible pump draws water down to a depth of 35 mm during continuous operation. The Quick Connect threaded connection also allows for quick and easy connection of 1", 1 1/4", and 1 1/2" flexible hoses.

Ceramic seal

For very long lifespan


Adjustable height float switch

Increases flexibility when switching the pumps on and off and prevents dry running.


Quick Connect

Connection adapter for quick and easy connection of 1'', 1 1/4'' and 1 1/2'' hoses.

Manufacturer

Manufacturer Details

Warnings & Safety Information

Dimensions

Type
Waste Water / Sewage

Type

Waste Water / Sewage

Waste water / sewage pumps are used for pumping and transporting waste water, sewage, and other liquids containing solids or particles
Power Source
Electric

Power Source

Electric
The power supply refers to the pump's need for electrical energy from an external power source, such as single-phase or three-phase power.
Voltage
Single-Phase

Voltage

Single-Phase

Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 
Power
750 W

Power

It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.

Features

with Cutter Impeller
No

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
Yes

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Outlet Nozzle
1", 1 1/2", 1 1/4"

Outlet Nozzle

The outlet nozzle refers to the point or the external diameter of the pump from which the pumped water or liquid exits. It is an important feature for determining the connection of the pump with the piping system and affects the flow capacity of the liquid.
Vortex
No

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Maximum Head Height
8 m

Maximum Head Height: 8


The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

  • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
  • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
Pump Submersion Depth
7 m
Maximum Particle Size
30 mm

Maximum Particle Size

Specifies the largest size of solid particles (such as sand, stones, or other impurities) that the device can pump without clogging or being damaged.

Materials & Construction

Set
No
Stainless
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

Reviews (1)

5.0
1
5.0
Review this product
  1. 1
  2. 4 stars
    0
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1 star
    0
Review this product
119,99 €
23,00 €   shipping cost