The black and the gray were fine. The red, however, was the worst. It wouldn't stick to the bed, not even the layers to each other. Unacceptable

Very poor quality, it keeps breaking and ruins the print.
It arrived without a box and nowhere does it say that it is from Creality.

For its price (at 10€) I have no complaints. It prints just fine with generic settings without any problem.

Unfortunately, a very bad experience. The filament does not unwind smoothly from the spool, it keeps "sticking" and causes problems with the flow. This results in failed prints, especially on long-duration pieces.

You can't leave it to run on its own — you have to constantly watch it to unblock it and manually give it some "slack." For serious use, it is practically unsuitable.

Very good!

Very good!

dry and it ruined 2 nozzles of a 3-month-old printer
I am talking about the black one

Very good filament for the Bambu lab A1.

I bought 2, one printed many prints perfectly, the other destroyed a printhead until I realized it was defective.

It does its job, it fit and worked just fine on my Kobra 3 v2, packaging was excellent. My only complaint is that, unlike ANYCUBIC's PLA, this one smells during use. Other than that, it's a good product that I would definitely recommend for a quick resupply, if you don't want to wait the 3-5 weeks it takes for the original to arrive.

In general, I don't easily leave comments on products. I decided to try this particular one because of the price and brand. The positive aspect is that it is not as transparent as some of the more expensive ones I have bought.
This one prints just fine, it just needs special care compared to most PLA and it will mostly print slower than others for a similar visual result.
Also, the filament tends to break and leave a piece inside, I mention this mainly because I use Bambu and during automatic changes it happened 2-3 times.
It also compresses easily and in this way causes clogs in the extruder and not in the hotend, so you need to loosen the spring in the extruder by one or two clicks for this specific filament, so for anyone printing fast, it's not suitable.
For me, since I print with a 0.2mm nozzle with this one, I have no problem because the speed is low anyway due to the nozzle, which doesn't have a high volumetric speed.
Tested on printing about 350 identical parts.

While the orange prints perfectly without any issue, the white—2 spools, both—leave small gaps with no material. I change the temperature, still nothing. Does anyone know what might be wrong?

For very rough prints it's ok, nothing more
I use it for samples as a cheap solution to get rid of it
Its finish is terrible on three different printers
It absorbs moisture very easily..
A lot of stringing
It needs a very careful temperature setup

For the blue color: slightly inferior quality compared to the plain black CR PLA, but maybe the color was to blame... Generally okay for a price of 14€

It was the first filament I bought and I found it very good for simple use. I used it with Ender v3.

As a material, it is quality, but the spool was quite tangled, so for large projects, you can't use it because it breaks every so often.

I print perfectly on Creality Ender 2 Pro. On the white one, you can intervene with posca markers and paint as you wish.

No problem with gray and black, which are the only ones I tried.

Excellent filament, I used it on BambuLab A1 with settings for Bambu filament. There was no problem, therefore it is highly recommended. I have also tried the gray one which is equally good

Very basic PLA. Extremely glossy texture even in fast prints, little stringing issues (no matter how much you play with retraction), good luck with proper ironing. But for functional prints, it's perfectly fine, of course with the fragile nature of regular PLA. For better filament in every aspect, check out eSun PLA+.

I used it on the 200 nozzle and 50 on the bed and it was flawless! No problems at all, neither stringing nor anything. Ideal for first material. Also durable even at 5% infill

Excellent print quality for the price it has. Depending on the fan speed for cooling and the deposition speed of the material, you can achieve glossier or matte results

I bought the gray and the black from the series. So far, no problems with the prints on Ender-3 V3 ke.

I was impressed by how quality product it is. At the begging I bought it just for testing because I bought the 3D printer but I order it again after I finished the first because the quality was quite impressive.

Very good product, in relation to its price. Good quality and the quality of the print is quite good.

Good thread for the money. Occasionally (thankfully not often) it has some issues and causes inconsistencies in the model. Every now and then the thread gets stuck while unwinding, but it doesn't cause any significant problems in printing.

In the grey color I had a big issue. I finally changed from 5 stars to 1 because after two months the filament started to break and get stuck inside the printer, it dried out completely, this is the first time this has happened to me

Nice thread, fair price, perfectly fine, no flaws in the printing compared to well-known brands that are available, and no breakages at all.

Overall, very good material for the price, I have already used three kilograms and the only complaint I have is that it requires a little attention with the temperature settings. (a couple of test prints and you have found the right settings)