Chromodomi Step Latex plastic paint is intended for indoor use and is applied to a clean surface using a roller, brush, or spray gun. It spreads easily and creates a velvet-smooth finish with excellent coverage and whiteness. It is highly resistant to frequent washing, contains no ammonia, and is certified in accordance with EN 71-3.
Before application, remove dust, grease, oil, flaking paint, rust, mould, and moisture from the surface. On new or porous surfaces, first apply a suitable primer, such as Step Primer, Life Dur Water, or Step Plaster. Stir the paint thoroughly and apply two coats, allowing 1–2 hours between coats. Do not apply at temperatures below 6 °C or above 40 °C, or when relative humidity exceeds 80%. The paint develops its full mechanical resistance in 20–30 days. Keep tools damp while working and clean them immediately with warm water and soap; do not pour wash water into groundwater.
- Type: Plastic paint
- Use: Indoor
- Volume: 10 L
- Finish: Velvet-smooth
- Resistance: Resistant to frequent washing
- Ammonia: None
- Certification: EN 71-3
- Application tools: Roller, brush, or spray gun
- Coats: 2
- Time between coats: 1–2 hours
- Application temperature: From 6 °C to 40 °C
- Maximum relative humidity for application: 80%
- Time to full mechanical resistance: 20–30 days
- Tool cleaning: With warm water and soap
Specifications
- Acrilyc
- No
Quantity
- Volume
- 10 lt
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.