Skroutz.mt

Abb Automatic Circuit Breaker 40A Four-pole AC 70433
Automatic Circuit Breaker

Abb Automatic Circuit Breaker 40A Four-pole AC 70433

Automatic circuit breaker type S204M-K40, DIN rail, 4 poles with screw terminals, 4 poles, curve K, for the protection of motors, transformers, and auxiliary circuits against overloads and short...

Automatic circuit breaker type S204M-K40, DIN rail, 4 poles with screw terminals, 4 poles, curve K, for the protection of motors, transformers, and auxiliary circuits against overloads and short circuits. Suitable for residential, commercial, and industrial installations with loads that have high starting current.

  • Standards: IEC/EN 60898-1, IEC/EN 60947-2
  • ...
See full description See full description

Learn more about invoicing
Review the product
Product report

Description

Description

Automatic circuit breaker type S204M-K40, DIN rail, 4 poles with screw terminals, 4 poles, curve K, for the protection of motors, transformers, and auxiliary circuits against overloads and short circuits. Suitable for residential, commercial, and industrial installations with loads that have high starting current.

  • Standards: IEC/EN 60898-1, IEC/EN 60947-2
  • Safety terminals with double chamber
  • Independent chamber for busbar and cable installation
  • Permanent laser-printed markings and labels
  • Screws that do not come out of the body
  • Loss protection
  • Wide range of accessories
  • Rated values: 40A, 400/440V AC, 50Hz
  • Short-circuit breaking capacity: 10kA
  • Protection degree: IP20, cover: IP40
  • On/off indicators: red-green
  • Color: light gray (RAL 7035)

S200M series from ABB.

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Specifications

Number of Poles
4
Rated Current
40 A
Operating Curve
Curve K

Operating Curve

The tripping curve shows the time required for the circuit breaker to switch off in relation to the current passing through it. For small overcurrents, the tripping is delayed to avoid unnecessary interruptions, while for very high values, such as in the case of a short circuit, the breaker operates immediately to protect the circuit. Different types of curves are used depending on the needs of each installation and the type of loads.

Curve K

Designed for loads with relatively high starting currents, such as motors or lower power transformers.

Power Supply

AC
Yes
DC
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

Automatic circuit breaker type S204M-K40, DIN rail, 4 poles with screw terminals, 4 poles, curve K, for the protection of motors, transformers, and auxiliary circuits against overloads and short circuits. Suitable for residential, commercial, and industrial installations with loads that have high starting current.

  • Standards: IEC/EN 60898-1, IEC/EN 60947-2
  • Safety terminals with double chamber
  • Independent chamber for busbar and cable installation
  • Permanent laser-printed markings and labels
  • Screws that do not come out of the body
  • Loss protection
  • Wide range of accessories
  • Rated values: 40A, 400/440V AC, 50Hz
  • Short-circuit breaking capacity: 10kA
  • Protection degree: IP20, cover: IP40
  • On/off indicators: red-green
  • Color: light gray (RAL 7035)

S200M series from ABB.

Manufacturer

Manufacturer Details

Warnings & Safety Information

Specifications

Number of Poles
4
Rated Current
40 A
Operating Curve
Curve K

Operating Curve

The tripping curve shows the time required for the circuit breaker to switch off in relation to the current passing through it. For small overcurrents, the tripping is delayed to avoid unnecessary interruptions, while for very high values, such as in the case of a short circuit, the breaker operates immediately to protect the circuit. Different types of curves are used depending on the needs of each installation and the type of loads.

Curve K

Designed for loads with relatively high starting currents, such as motors or lower power transformers.

Power Supply

AC
Yes
DC
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

66,25 €
14,00 €   shipping cost