Skroutz.mt

Focal Car Speaker Set 130 AS 5" with 50W RMS (2 Way)
Car Speakers

Focal Car Speaker Set 130 AS 5" with 50W RMS (2 Way) Code: APA-2017-63668

Technical Specifications:

  • Type: Pair of Component Speakers
  • Diameter: 5” – 13cm
  • RMS Power: 50Watt
  • MAX Power: 100Watt
  • Sensitivity (2.83V/1m): 90dB
  • Frequency Response: 65Hz – 20kHz
  • Nominal Impedance:...

Technical Specifications:

  • Type: Pair of Component Speakers
  • Diameter: 5” – 13cm
  • RMS Power: 50Watt
  • MAX Power: 100Watt
  • Sensitivity (2.83V/1m): 90dB
  • Frequency Response: 65Hz – 20kHz
  • Nominal Impedance: 4Ohm
  • Cone Type: DFS (Dual Fiberglass Structure)
  • Suspension Type: Butyl
  • Voice Coil Diameter: 1” – 25mm
  • Voice Coil Height: 07/16” – 11mm
  • Tweeter Type: Inverted Dome...
See full description See full description

  • RMS Power

    The actual power at which the speakers can operate for an extended period of time. Usually, the higher this value, the louder and clearer the music sounds.

  • Resistance

     The resistance of a speaker, measured in Ohms, indicates how easily electric current flows through it and affects how much power it can receive from the amplifier, contributing to the safe and proper operation of the audio system.

  • Maximum Power

    The maximum power indicates the highest amount of energy a speaker can handle without being damaged. The higher this value, the louder the sound can be. At the same time, the power provided by the amplifier or audio system should be matched to the speaker's limits to ensure safe operation.
  • See all
The product is not available for shipping to the selected country.
Review the product
Product report

Description

Description

Technical Specifications:

  • Type: Pair of Component Speakers
  • Diameter: 5” – 13cm
  • RMS Power: 50Watt
  • MAX Power: 100Watt
  • Sensitivity (2.83V/1m): 90dB
  • Frequency Response: 65Hz – 20kHz
  • Nominal Impedance: 4Ohm
  • Cone Type: DFS (Dual Fiberglass Structure)
  • Suspension Type: Butyl
  • Voice Coil Diameter: 1” – 25mm
  • Voice Coil Height: 07/16” – 11mm
  • Tweeter Type: Inverted Dome Aluminum
  • Adjustable Tweeter Level: 3 positions (-3 / 0 / + 3dB)
  • Crossover Separation: 12/12 dB / oct (5 Khz)
  • Mounting Depth: 54.7mm

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Number
APA-2017-63668

Dimensions

Type
2 Way

Type

2 Way

Speakers consisting of two ways: one for the treble (high frequencies) and one for the bass (low frequencies). Ideal for use in basic systems or for limited space.
Shape
Round
Round Speakers Diameter
5 "

Technical Specifications

Peak Power
100 W

Peak Power

The maximum power indicates the highest amount of energy a speaker can handle without being damaged. The higher this value, the louder the sound can be. At the same time, the power provided by the amplifier or audio system should be matched to the speaker's limits to ensure safe operation.
Power (RMS)
50 W

Power (RMS)

The actual power at which the speakers can operate for an extended period of time. Usually, the higher this value, the louder and clearer the music sounds.
Nominal Impendance
4 ohm

Nominal Impendance

 The resistance of a speaker, measured in Ohms, indicates how easily electric current flows through it and affects how much power it can receive from the amplifier, contributing to the safe and proper operation of the audio system.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

Technical Specifications:

  • Type: Pair of Component Speakers
  • Diameter: 5” – 13cm
  • RMS Power: 50Watt
  • MAX Power: 100Watt
  • Sensitivity (2.83V/1m): 90dB
  • Frequency Response: 65Hz – 20kHz
  • Nominal Impedance: 4Ohm
  • Cone Type: DFS (Dual Fiberglass Structure)
  • Suspension Type: Butyl
  • Voice Coil Diameter: 1” – 25mm
  • Voice Coil Height: 07/16” – 11mm
  • Tweeter Type: Inverted Dome Aluminum
  • Adjustable Tweeter Level: 3 positions (-3 / 0 / + 3dB)
  • Crossover Separation: 12/12 dB / oct (5 Khz)
  • Mounting Depth: 54.7mm

Manufacturer

Manufacturer Details

Warnings & Safety Information
Product Number
APA-2017-63668

Dimensions

Type
2 Way

Type

2 Way

Speakers consisting of two ways: one for the treble (high frequencies) and one for the bass (low frequencies). Ideal for use in basic systems or for limited space.
Shape
Round
Round Speakers Diameter
5 "

Technical Specifications

Peak Power
100 W

Peak Power

The maximum power indicates the highest amount of energy a speaker can handle without being damaged. The higher this value, the louder the sound can be. At the same time, the power provided by the amplifier or audio system should be matched to the speaker's limits to ensure safe operation.
Power (RMS)
50 W

Power (RMS)

The actual power at which the speakers can operate for an extended period of time. Usually, the higher this value, the louder and clearer the music sounds.
Nominal Impendance
4 ohm

Nominal Impendance

 The resistance of a speaker, measured in Ohms, indicates how easily electric current flows through it and affects how much power it can receive from the amplifier, contributing to the safe and proper operation of the audio system.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.