• The SP 16,000 Dirt dirty water pump with a maximum capacity of 16,000 l/h reliably pumps dirty water with dirt particles up to 20 mm, e.g., from garden ponds or flooded basements. 
• In case of heavy dirt, an optional pre-filter protects against blockages. 
• The mechanical seal known from the Professional series is installed for longer service life. 
• The submersible pump features a float switch for automatic activation and deactivation. 
• The float is also mounted on a rail and can be adjusted vertically for pumping at a low level. 
• In manual mode, it can even pump down to a residual water level of 25 mm. 
• And the Quick Connect connection thread allows for quick and easy connection of 1", 1 1/4", and 1 1/2" hoses.

For very long service life

Increases flexibility when the pump switch is turned on and off and prevents dry running.

Connection thread for quick and easy connection of flexible hoses 1", 1 1/4" and 1 1/2" or G1 connection.

Reliable water pumping with debris up to 20 millimeters in size

For conversion to continuous operation.

Comfortable to hold and can be used for holding rope

Protects the pump from heavy dirt and thus prevents the impeller of the pump from clogging

• Max. motor power (W): 550
• Maximum pumping capacity (l/h): < 16000
• Delivery temperature (°C): max. 35
• Delivery height (m): 8
• Pressure (bar): max. 0.8
• Particle size (mm): max. 20
• Submersion depth (m): max. 7
• Minimum residual water, manual (mm): 25
• Remaining water height (mm): 25
• Thread connection: G1 1/2
• Thread connection on pressure side: G1/2 internal thread
• Power cable (m): 10
• Voltage (V): 230 - 240
• Frequency (Hz): 50
• Weight without accessories (kg): 4.9
• Dimensions (L × W × H) (mm): 229 x 238 x 303