Skroutz.mt

Karcher SP 16.000 Dual Single-phase Pump Waste Water / Sewage 0.73hp 1.645-832.0
Submersible Water Pumps

Karcher SP 16.000 Dual Single-phase Pump Waste Water / Sewage 0.73hp 1.645-832.0

Key features:

  • 2-in-1 operation
  • Flat suction up to 1 mm
  • Flow rate 16,000 l/h
  • Ceramic seal

It is the pump that doesn’t know what a “difficult task” is, as it handles everything from clean water to sludge with particles up to 20 mm with equal ease!

See full description

  • Horsepower

    Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).

  • Voltage

    Single-Phase

    Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 

  • Power

    It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.

  • Manometric Height

    9

    The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

    • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
    • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
  • See all
139 00 €
Delivery by Wed, 24 Jun
17,00 €   shipping cost
Sent from Greece
From e-tserpelis 4.9 (51)
4.9 (51 reviews)
Greece
1 piece
See Water Pumps on the page of e-tserpelis
Review the product
Product report

Description

Description

At a glance

  • 2-in-1 Flexibility: With a simple move on the filter basket, you can turn your pump from a dirty water pump into a flat suction pump.
  • Dry Floor: You can extract water down to the last millimeter (1 mm), leaving the surface almost dry.
  • Professional Durability: The ceramic mechanical seal ensures your pump will last for years, even under tough use.
  • Smart Float Switch: Adjust the height of the float switch on the rail to set exactly when pumping starts and stops.
  • Quick Connection: Forget fiddling with threads; the Quick Connect system makes your job easy.

Dual Function for Every Need

You will find that the SP 16.000 Dual is the ultimate multi-tool. When the water is full of mud and stones up to 20 mm, you use it in its standard setting. But if you want to empty your pool or collect water from a flood on the floor, you turn the filter and watch the water disappear down to a level of 1 mm.

Reliability and Longevity

You will appreciate the ceramic seal that Kärcher borrows from its professional series. This means that your motor is completely protected from water and wear, giving you the confidence that your pump will operate perfectly every time you need it, without unpleasant surprises.

Ergonomics and Handling

You will find the comfortable carrying handle extremely useful, not only for transporting it, but also for tying the rope to it when submerging the pump into the well. The float switch, which moves along a rail, gives you the freedom to set the automatic operation level, thus avoiding dry running that could damage the machine.

Technical Specifications:

  • Maximum Flow Rate: 16,000 l/h
  • Maximum Pressure / Head: 0.9 bar / 9 m
  • Maximum Particle Size: 20 mm
  • Flat Suction: Up to 1 mm
  • Maximum Submersion Depth: 7 m
  • Water Temperature: Up to 35 °C
  • Hose Connection: G1, 1", 1 1/4", 1 1/2"
  • Weight (without accessories): 5 kg

What’s included in your package:

  • Submersible pump SP 16.000 Dual
  • Quick Connect coupling for easy hose installation
  • Adjustable float switch
  • Ergonomic carrying handle
  • User manual

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Dimensions

Type
Waste Water / Sewage

Type

Waste Water / Sewage

Waste water / sewage pumps are used for pumping and transporting waste water, sewage, and other liquids containing solids or particles
Power Source
Electric

Power Source

Electric
The power supply refers to the pump's need for electrical energy from an external power source, such as single-phase or three-phase power.
Voltage
Single-Phase

Voltage

Single-Phase

Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 
Horsepower
0.73 hp

Horsepower

Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).
Power
547.5 W

Power

It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.
Cable Length
10 m

Features

with Cutter Impeller
No

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
No

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Outlet Nozzle
1", 1 1/4", 1 1/2"

Outlet Nozzle

The outlet nozzle refers to the point or the external diameter of the pump from which the pumped water or liquid exits. It is an important feature for determining the connection of the pump with the piping system and affects the flow capacity of the liquid.
Vortex
No

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Maximum Head Height
9 m

Maximum Head Height: 9


The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

  • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
  • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
Pump Submersion Depth
10 m
Maximum Particle Size
20 mm

Maximum Particle Size

Specifies the largest size of solid particles (such as sand, stones, or other impurities) that the device can pump without clogging or being damaged.

Materials & Construction

Set
No
Stainless
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

At a glance

  • 2-in-1 Flexibility: With a simple move on the filter basket, you can turn your pump from a dirty water pump into a flat suction pump.
  • Dry Floor: You can extract water down to the last millimeter (1 mm), leaving the surface almost dry.
  • Professional Durability: The ceramic mechanical seal ensures your pump will last for years, even under tough use.
  • Smart Float Switch: Adjust the height of the float switch on the rail to set exactly when pumping starts and stops.
  • Quick Connection: Forget fiddling with threads; the Quick Connect system makes your job easy.

Dual Function for Every Need

You will find that the SP 16.000 Dual is the ultimate multi-tool. When the water is full of mud and stones up to 20 mm, you use it in its standard setting. But if you want to empty your pool or collect water from a flood on the floor, you turn the filter and watch the water disappear down to a level of 1 mm.

Reliability and Longevity

You will appreciate the ceramic seal that Kärcher borrows from its professional series. This means that your motor is completely protected from water and wear, giving you the confidence that your pump will operate perfectly every time you need it, without unpleasant surprises.

Ergonomics and Handling

You will find the comfortable carrying handle extremely useful, not only for transporting it, but also for tying the rope to it when submerging the pump into the well. The float switch, which moves along a rail, gives you the freedom to set the automatic operation level, thus avoiding dry running that could damage the machine.

Technical Specifications:

  • Maximum Flow Rate: 16,000 l/h
  • Maximum Pressure / Head: 0.9 bar / 9 m
  • Maximum Particle Size: 20 mm
  • Flat Suction: Up to 1 mm
  • Maximum Submersion Depth: 7 m
  • Water Temperature: Up to 35 °C
  • Hose Connection: G1, 1", 1 1/4", 1 1/2"
  • Weight (without accessories): 5 kg

What’s included in your package:

  • Submersible pump SP 16.000 Dual
  • Quick Connect coupling for easy hose installation
  • Adjustable float switch
  • Ergonomic carrying handle
  • User manual

Manufacturer

Manufacturer Details

Warnings & Safety Information

Dimensions

Type
Waste Water / Sewage

Type

Waste Water / Sewage

Waste water / sewage pumps are used for pumping and transporting waste water, sewage, and other liquids containing solids or particles
Power Source
Electric

Power Source

Electric
The power supply refers to the pump's need for electrical energy from an external power source, such as single-phase or three-phase power.
Voltage
Single-Phase

Voltage

Single-Phase

Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 
Horsepower
0.73 hp

Horsepower

Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).
Power
547.5 W

Power

It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.
Cable Length
10 m

Features

with Cutter Impeller
No

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
No

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Outlet Nozzle
1", 1 1/4", 1 1/2"

Outlet Nozzle

The outlet nozzle refers to the point or the external diameter of the pump from which the pumped water or liquid exits. It is an important feature for determining the connection of the pump with the piping system and affects the flow capacity of the liquid.
Vortex
No

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Maximum Head Height
9 m

Maximum Head Height: 9


The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

  • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
  • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
Pump Submersion Depth
10 m
Maximum Particle Size
20 mm

Maximum Particle Size

Specifies the largest size of solid particles (such as sand, stones, or other impurities) that the device can pump without clogging or being damaged.

Materials & Construction

Set
No
Stainless
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

139,00 €
17,00 €   shipping cost