Skroutz.mt

Fronius TPS 500i Welding Machine Inverter MAG / MIG / TIG with Maximum Welding Current 500A and Duty Cycle 40%
Welding Machines

Fronius TPS 500i Welding Machine Inverter MAG / MIG / TIG with Maximum Welding Current 500A and Duty Cycle 40%

The TPS 500i is one of the most advanced welding systems with a massive power capacity of up to 500 A, meeting the highest demands for steel, stainless steel, and aluminum applications.

The...

The TPS 500i is one of the most advanced welding systems with a massive power capacity of up to 500 A, meeting the highest demands for steel, stainless steel, and aluminum applications.

The intelligent equipment, modular structure, and numerous expansion options provide the necessary flexibility and efficiency for all kinds of applications.

  • Available in...
See full description See full description

  • Welding Current

    500

    Suitable for professional use on thick metals, such as steel or cast iron constructions.

  • Duty Cycle

    The Duty Cycle is the portion of a ten-minute period that a welding machine can operate continuously at maximum Amperes before it needs to stop and cool down.

    2.

    For example, a welding machine with a maximum Amperage of 200 A and a Duty Cycle of 30% can operate continuously at 200 A for 3 minutes before it needs to stop.
  • See all
5535 36 €
Delivery by Tue, 07 Jul
50,00 €   shipping cost
Sent from Greece
From Tools4pro
Greece
3 pieces
See Tools on the page of Tools4pro
Review the product
Product report

Description

Description

The TPS 500i is one of the most advanced welding systems with a massive power capacity of up to 500 A, meeting the highest demands for steel, stainless steel, and aluminum applications.

The intelligent equipment, modular structure, and numerous expansion options provide the necessary flexibility and efficiency for all kinds of applications.

  • Available in water-cooled or air-cooled versions.
  • Easy to use.
  • 5 Easy Jobs.
  • Standard and Pulse processes are available as basic packages.
  • LSC, PMC, or CMT are available as options for particularly demanding welding tasks.

LSC - Low Spatter Control: The short circuit is resolved at a low current level resulting in a stable welding process.

PMC – Pulse Multi Control: With optimized pulse characteristics, PMC equals high-quality welds at high welding speeds, with penetration and arc length stabilizers.

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Dimensions

Type
MAG, MIG, TIG

Type

MIG

The easiest welding method even for a beginner. 2. If the wire to be used does not have a special coating (flux), it should be connected to an external gas cylinder (e.g. argon, CO2).

TIG

Slow welding for detailed work on aluminum and stainless steel, mainly. Requires experience and connection to an external gas cylinder. Does not create "spatters".
Welding Current (max)
500 A

Welding Current (max): 500


Suitable for professional use on thick metals, such as steel or cast iron constructions.
Operation Cycle (max Ampere)
40 %

Operation Cycle (max Ampere)

The Duty Cycle is the portion of a ten-minute period that a welding machine can operate continuously at maximum Amperes before it needs to stop and cool down.

2.

For example, a welding machine with a maximum Amperage of 200 A and a Duty Cycle of 30% can operate continuously at 200 A for 3 minutes before it needs to stop.
Weight
15000 gr

Additional Features

Inverter
Yes

Inverter


New technology welding. Very good in terms of performance, durability, and weight, but with a high cost of repair in case of damage. They have automation for better and safer work. If connected to a generator, it is recommended to choose one with 8kVA or more.
IGBT
No
VRD
Yes

VRD


It is a voltage reduction device used in welding machines to improve user safety.
with Voltage Stabilizer
Yes

with Voltage Stabilizer


It detects fluctuations in the supply voltage and corrects them in real-time, resulting in a stable output voltage, improving the machine's lifespan and the quality of the welding.
for Generator with AVR
Yes

for Generator with AVR


Suitable for generator with AVR voltage stabilizer.

Features

Hot Start
Yes

Hot Start


Temporarily increases the current intensity at the moment of welding initiation.
Anti Stick
Yes

Anti Stick


Cuts off the current if the electrode sticks to the metal, to prevent it from burning.
Arc Force
Yes

Arc Force


Helps in the stability of the arc during welding.
2T Operation
Yes

2T Operation


Press and hold the torch button to start welding. Once you release it, the welding stops.
4T Mode
Yes

4T Mode


Press the button once to start welding and release it. You do not need to keep the button pressed.
Spot Function
Yes

Spot Function


Applies a specific amount of current for a very short duration, creating a spot weld.
Pulsed
Yes

Pulsed


Instead of remaining constant during welding, the current increases and decreases in pulses at specified time intervals.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

The TPS 500i is one of the most advanced welding systems with a massive power capacity of up to 500 A, meeting the highest demands for steel, stainless steel, and aluminum applications.

The intelligent equipment, modular structure, and numerous expansion options provide the necessary flexibility and efficiency for all kinds of applications.

  • Available in water-cooled or air-cooled versions.
  • Easy to use.
  • 5 Easy Jobs.
  • Standard and Pulse processes are available as basic packages.
  • LSC, PMC, or CMT are available as options for particularly demanding welding tasks.

LSC - Low Spatter Control: The short circuit is resolved at a low current level resulting in a stable welding process.

PMC – Pulse Multi Control: With optimized pulse characteristics, PMC equals high-quality welds at high welding speeds, with penetration and arc length stabilizers.

Manufacturer

Manufacturer Details

Warnings & Safety Information

Dimensions

Type
MAG, MIG, TIG

Type

MIG

The easiest welding method even for a beginner. 2. If the wire to be used does not have a special coating (flux), it should be connected to an external gas cylinder (e.g. argon, CO2).

TIG

Slow welding for detailed work on aluminum and stainless steel, mainly. Requires experience and connection to an external gas cylinder. Does not create "spatters".
Welding Current (max)
500 A

Welding Current (max): 500


Suitable for professional use on thick metals, such as steel or cast iron constructions.
Operation Cycle (max Ampere)
40 %

Operation Cycle (max Ampere)

The Duty Cycle is the portion of a ten-minute period that a welding machine can operate continuously at maximum Amperes before it needs to stop and cool down.

2.

For example, a welding machine with a maximum Amperage of 200 A and a Duty Cycle of 30% can operate continuously at 200 A for 3 minutes before it needs to stop.
Weight
15000 gr

Additional Features

Inverter
Yes

Inverter


New technology welding. Very good in terms of performance, durability, and weight, but with a high cost of repair in case of damage. They have automation for better and safer work. If connected to a generator, it is recommended to choose one with 8kVA or more.
IGBT
No
VRD
Yes

VRD


It is a voltage reduction device used in welding machines to improve user safety.
with Voltage Stabilizer
Yes

with Voltage Stabilizer


It detects fluctuations in the supply voltage and corrects them in real-time, resulting in a stable output voltage, improving the machine's lifespan and the quality of the welding.
for Generator with AVR
Yes

for Generator with AVR


Suitable for generator with AVR voltage stabilizer.

Features

Hot Start
Yes

Hot Start


Temporarily increases the current intensity at the moment of welding initiation.
Anti Stick
Yes

Anti Stick


Cuts off the current if the electrode sticks to the metal, to prevent it from burning.
Arc Force
Yes

Arc Force


Helps in the stability of the arc during welding.
2T Operation
Yes

2T Operation


Press and hold the torch button to start welding. Once you release it, the welding stops.
4T Mode
Yes

4T Mode


Press the button once to start welding and release it. You do not need to keep the button pressed.
Spot Function
Yes

Spot Function


Applies a specific amount of current for a very short duration, creating a spot weld.
Pulsed
Yes

Pulsed


Instead of remaining constant during welding, the current increases and decreases in pulses at specified time intervals.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

5.535,36 €
50,00 €   shipping cost