Computer Cases

Raijintek Paean C7 Gaming Midi Tower Computer Case with Window Panel White

RAIJINTEK PAEAN C7

  • Form factor: Midi Tower
  • Type: PC
  • Product color: White
  • Supported power supply form factors: ATX
  • Supported rear fan diameters: 120 mm
  • Supported top fan diameters: 120, 140 mm
  • ...

RAIJINTEK PAEAN C7

  • Form factor: Midi Tower
  • Type: PC
  • Product color: White
  • Supported power supply form factors: ATX
  • Supported rear fan diameters: 120 mm
  • Supported top fan diameters: 120, 140 mm
  • Supported bottom fan diameters: 120 mm
  • Supported hard drive sizes: 3.5"
  • SSD form factor: 2.5"
  • Width: 285 mm
  • Depth: 420 mm
  • Height: 380 mm
See full description See full description
  • See all
The product is not available for shipping to the selected country.

Description

Description

RAIJINTEK PAEAN C7

  • Form factor: Midi Tower
  • Type: PC
  • Product color: White
  • Supported power supply form factors: ATX
  • Supported rear fan diameters: 120 mm
  • Supported top fan diameters: 120, 140 mm
  • Supported bottom fan diameters: 120 mm
  • Supported hard drive sizes: 3.5"
  • SSD form factor: 2.5"
  • Width: 285 mm
  • Depth: 420 mm
  • Height: 380 mm

Manufacturer

See full description

Specifications

Specifications

Main Specifications

Colour
White
Size
Midi Tower
Compatible Motherboard Type
ATX, Micro ATX, Mini ITX

Dimensions

Height
380 mm
Width
285 mm
Length
420 mm

Internal Spaces

Maximum Graphics Card Length
410 mm
Maximum Processor Heatsink Height
160 mm

Drive Bays

Internal Hub 3.5"
2
Internal Hub 2.5"
3

Fan Positions

Rear
1
Top Positions
3
Bottom Positions
3

Water Cooling

Radiator Position
Top, Bottom

Specifications

Connectivity
Audio, USB 3.0, USB-C
Extras
Side Window
Gaming
Yes
Airflow
Yes
Home & Office
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Reviews (2)

Reviews

  1. 2
  2. 4 stars
    0
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1 star
    0
Review this product

Reviews photos

Reviews photos
Reviews photos
Reviews photos

Reviews by our members

  • Good Airflow 10 120mm FANS overall to put the 3 fans on the side you need a long thin screwdriver to pass through the holes + the top fan is a bit difficult to screw in because the holes are literally right below the motherboard with the cables of the power button etc.

    I have Capellix Elite XT Liquid Cooling on the side, the radiator didn't fit, so most 360 liquid coolings will go on the top.

    You can use a non-modular or semi-modular PSU, it has enough space.

    Personally, I had to sacrifice one SSD slot that is at the back (it has 2) to install the Corsair RGB HUB, which is bulky.

    It only has dust filters on the top and bottom, I would definitely like to have one at the back for the power supply.

    Since 90% of people who buy it will fill it with RGB, you should know that at least in the white version, the light passes through the holes as you can see in the photo.

    Overall, it is a very good imitation of a Lian Li Case and a decent price below €80.

    Translated from Greek ·
    • Space
    • Cable management
    • Construction quality
    • Air flow
    • Value for money
    Did you find this review helpful?
  • nikiforos_athanasopoulos
    5
    2 out of 6 members found this review helpful
    This review is about the colour: Black

    First of all, it is an imitation of Lian li, but it is not a bad imitation and if it remains below 80 euros, it is fine. It is also a very good alternative to the overpriced Lian li cases.

    It is sturdy, nice metal, the quality is not bad, neither is the paint. It has good thick tempered glass and a sliding latch with safety, two screws on the back/side of the glass, NOT WITH 4 SCREWS! which makes it extremely dangerous... so yes. It seems that a lot of attention was paid to the design and construction, it also fits a regular PSU. Personally, I installed an E-ATX motherboard, it fits normally, although the motherboard stands out a bit, but not everything is fine and the case does not have such specifications, let's not forget that.

    Observation:
    I would like a little more attention to the side fans, the holes were not measured correctly and not all screws fit, it requires a thin body with a thick head to screw in all three.

    While the 3 fans fit easily, I have reservations about some 360 liquid cooling, maybe not all of them fit. Although it has enough space for the fans to fit in the back of the case, it has a thin line like a rail that makes (dangerous) the placement, at least I am afraid of it, both for the fans and for liquid cooling.

    Negatives:
    One fan, guys... at least one in the back... since this company makes liquid cooling and their cases, couldn't they include one fan in the back for 2.50 euros?
    The IO clips are not reusable, you take them out and throw them away, leaving a hole behind, okay it doesn't matter, but I think it is a disadvantage for the target audience it addresses...

    Translated from Greek ·
    • Space
    • Cable management
    • Construction quality
    • Silent
    • Air flow
    • Value for money
    • Dust filtering
    Did you find this review helpful?
  • Good Airflow 10 120mm FANS overall to put the 3 fans on the side you need a long thin screwdriver to pass through the holes + the top fan is a bit difficult to screw in because the holes are literally right below the motherboard with the cables of the power button etc.

    I have Capellix Elite XT Liquid Cooling on the side, the radiator didn't fit, so most 360 liquid coolings will go on the top.

    You can use a non-modular or semi-modular PSU, it has enough space.

    Personally, I had to sacrifice one SSD slot that is at the back (it has 2) to install the Corsair RGB HUB, which is bulky.

    It only has dust filters on the top and bottom, I would definitely like to have one at the back for the power supply.

    Since 90% of people who buy it will fill it with RGB, you should know that at least in the white version, the light passes through the holes as you can see in the photo.

    Overall, it is a very good imitation of a Lian Li Case and a decent price below €80.

    Translated from Greek ·
    0
  • First of all, it is an imitation of Lian li, but it is not a bad imitation and if it remains below 80 euros, it is fine. It is also a very good alternative to the overpriced Lian li cases.

    It is sturdy, nice metal, the quality is not bad, neither is the paint. It has good thick tempered glass and a sliding latch with safety, two screws on the back/side of the glass, NOT WITH 4 SCREWS! which makes it extremely dangerous... so yes. It seems that a lot of attention was paid to the design and construction, it also fits a regular PSU. Personally, I installed an E-ATX motherboard, it fits normally, although the motherboard stands out a bit, but not everything is fine and the case does not have such specifications, let's not forget that.

    Observation:
    I would like a little more attention to the side fans, the holes were not measured correctly and not all screws fit, it requires a thin body with a thick head to screw in all three.

    While the 3 fans fit easily, I have reservations about some 360 liquid cooling, maybe not all of them fit. Although it has enough space for the fans to fit in the back of the case, it has a thin line like a rail that makes (dangerous) the placement, at least I am afraid of it, both for the fans and for liquid cooling.

    Negatives:
    One fan, guys... at least one in the back... since this company makes liquid cooling and their cases, couldn't they include one fan in the back for 2.50 euros?
    The IO clips are not reusable, you take them out and throw them away, leaving a hole behind, okay it doesn't matter, but I think it is a disadvantage for the target audience it addresses...

    Translated from Greek ·
    2
  • See all

Description & Specifications

Main Specifications

Colour
White
Size
Midi Tower
Compatible Motherboard Type
ATX, Micro ATX, Mini ITX

Dimensions

Height
380 mm
Width
285 mm
Length
420 mm

Internal Spaces

Maximum Graphics Card Length
410 mm
Maximum Processor Heatsink Height
160 mm

Drive Bays

Internal Hub 3.5"
2
Internal Hub 2.5"
3

Fan Positions

Rear
1
Top Positions
3
Bottom Positions
3

Water Cooling

Radiator Position
Top, Bottom

Specifications

Connectivity
Audio, USB 3.0, USB-C
Extras
Side Window
Gaming
Yes
Airflow
Yes
Home & Office
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

Description

RAIJINTEK PAEAN C7

  • Form factor: Midi Tower
  • Type: PC
  • Product color: White
  • Supported power supply form factors: ATX
  • Supported rear fan diameters: 120 mm
  • Supported top fan diameters: 120, 140 mm
  • Supported bottom fan diameters: 120 mm
  • Supported hard drive sizes: 3.5"
  • SSD form factor: 2.5"
  • Width: 285 mm
  • Depth: 420 mm
  • Height: 380 mm

Manufacturer

Reviews (2)

  1. 2
  2. 4 stars
    0
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1 star
    0
Review this product

Reviews photos

Reviews photos
Reviews photos
Reviews photos

Reviews by our members

  • Good Airflow 10 120mm FANS overall to put the 3 fans on the side you need a long thin screwdriver to pass through the holes + the top fan is a bit difficult to screw in because the holes are literally right below the motherboard with the cables of the power button etc.

    I have Capellix Elite XT Liquid Cooling on the side, the radiator didn't fit, so most 360 liquid coolings will go on the top.

    You can use a non-modular or semi-modular PSU, it has enough space.

    Personally, I had to sacrifice one SSD slot that is at the back (it has 2) to install the Corsair RGB HUB, which is bulky.

    It only has dust filters on the top and bottom, I would definitely like to have one at the back for the power supply.

    Since 90% of people who buy it will fill it with RGB, you should know that at least in the white version, the light passes through the holes as you can see in the photo.

    Overall, it is a very good imitation of a Lian Li Case and a decent price below €80.

    Translated from Greek ·
    • Space
    • Cable management
    • Construction quality
    • Air flow
    • Value for money
    Did you find this review helpful?
  • nikiforos_athanasopoulos
    5
    2 out of 6 members found this review helpful
    This review is about the colour: Black

    First of all, it is an imitation of Lian li, but it is not a bad imitation and if it remains below 80 euros, it is fine. It is also a very good alternative to the overpriced Lian li cases.

    It is sturdy, nice metal, the quality is not bad, neither is the paint. It has good thick tempered glass and a sliding latch with safety, two screws on the back/side of the glass, NOT WITH 4 SCREWS! which makes it extremely dangerous... so yes. It seems that a lot of attention was paid to the design and construction, it also fits a regular PSU. Personally, I installed an E-ATX motherboard, it fits normally, although the motherboard stands out a bit, but not everything is fine and the case does not have such specifications, let's not forget that.

    Observation:
    I would like a little more attention to the side fans, the holes were not measured correctly and not all screws fit, it requires a thin body with a thick head to screw in all three.

    While the 3 fans fit easily, I have reservations about some 360 liquid cooling, maybe not all of them fit. Although it has enough space for the fans to fit in the back of the case, it has a thin line like a rail that makes (dangerous) the placement, at least I am afraid of it, both for the fans and for liquid cooling.

    Negatives:
    One fan, guys... at least one in the back... since this company makes liquid cooling and their cases, couldn't they include one fan in the back for 2.50 euros?
    The IO clips are not reusable, you take them out and throw them away, leaving a hole behind, okay it doesn't matter, but I think it is a disadvantage for the target audience it addresses...

    Translated from Greek ·
    • Space
    • Cable management
    • Construction quality
    • Silent
    • Air flow
    • Value for money
    • Dust filtering
    Did you find this review helpful?
  • Good Airflow 10 120mm FANS overall to put the 3 fans on the side you need a long thin screwdriver to pass through the holes + the top fan is a bit difficult to screw in because the holes are literally right below the motherboard with the cables of the power button etc.

    I have Capellix Elite XT Liquid Cooling on the side, the radiator didn't fit, so most 360 liquid coolings will go on the top.

    You can use a non-modular or semi-modular PSU, it has enough space.

    Personally, I had to sacrifice one SSD slot that is at the back (it has 2) to install the Corsair RGB HUB, which is bulky.

    It only has dust filters on the top and bottom, I would definitely like to have one at the back for the power supply.

    Since 90% of people who buy it will fill it with RGB, you should know that at least in the white version, the light passes through the holes as you can see in the photo.

    Overall, it is a very good imitation of a Lian Li Case and a decent price below €80.

    Translated from Greek ·
    0
  • First of all, it is an imitation of Lian li, but it is not a bad imitation and if it remains below 80 euros, it is fine. It is also a very good alternative to the overpriced Lian li cases.

    It is sturdy, nice metal, the quality is not bad, neither is the paint. It has good thick tempered glass and a sliding latch with safety, two screws on the back/side of the glass, NOT WITH 4 SCREWS! which makes it extremely dangerous... so yes. It seems that a lot of attention was paid to the design and construction, it also fits a regular PSU. Personally, I installed an E-ATX motherboard, it fits normally, although the motherboard stands out a bit, but not everything is fine and the case does not have such specifications, let's not forget that.

    Observation:
    I would like a little more attention to the side fans, the holes were not measured correctly and not all screws fit, it requires a thin body with a thick head to screw in all three.

    While the 3 fans fit easily, I have reservations about some 360 liquid cooling, maybe not all of them fit. Although it has enough space for the fans to fit in the back of the case, it has a thin line like a rail that makes (dangerous) the placement, at least I am afraid of it, both for the fans and for liquid cooling.

    Negatives:
    One fan, guys... at least one in the back... since this company makes liquid cooling and their cases, couldn't they include one fan in the back for 2.50 euros?
    The IO clips are not reusable, you take them out and throw them away, leaving a hole behind, okay it doesn't matter, but I think it is a disadvantage for the target audience it addresses...

    Translated from Greek ·
    2
  • See all