The ACV 59.PGA.01 steering wheel control adapter retains the steering wheel control functions when replacing the factory radio, using a dedicated radio connection cable. It also retains the CAN bus, handbrake and reverse signals, ignition, illumination, speed pulse and vehicle settings, which are supported via the steering wheel controls.
Designed for vehicles with a 40-pin PSA Quadlock connector and factory RD4, RT4 or RD45 1 DIN system. It is not compatible with factory Bosch systems, Magneti Marelli RT3 navigation systems or Harman Becker systems, or the JBL sound system. Vehicles with ECO mode require a permanent +12 V supply to terminal 30, protected by a battery fuse. For vehicles with rear PDC, refer to item 42cxpdc.
- Type: Steering wheel control adapter
- Compatibility: Citroen, Fiat, Peugeot and Toyota
- Citroen models: 1007 [2005 - 2009], 207 [2006 - 2014], 207 CC [2007 - 2014], 208 [2012 >], 3008 (1st GEN) [2009 - 2016], 307 [2001 - 2008], 308 (1st GEN) T7 [2008 - 2013], 407 [2004 - 2011], 5008 [2009 - 2016], 508 (1st Gen) [2010 - 2018], 607 [2000 - 2009], 807 [2002 - 2011], Berlingo I [1998 - 2013], Berlingo II [2008 - 2018], C1 (P) [03/2012 - 06/2014], C2 [2003 - 2009], C3 (1st GEN) [2002 - 2009], C3 (2nd GEN) [2010 - 2016], C3 Picasso [2009 - 2017], C4 (1st GEN) [2004 - 2010], C4 (2nd GEN) [2011 - 2018], C4 Grand Picasso [2006 - 2013], C4 Picasso (1st GEN) [2006 - 2013], C5 (1st GEN) Facelift [2004 - 2008], C5 (2nd GEN) RD/TD [2008 - 2017], C6 [2006 - 2012], C8 [2003 - 2010], Dispatch (2nd GEN) [2007 - 2016], Dispatch (Space Tourer) [2016 >], DS 3 [2010 >], DS 4 [2011 - 2018], Jumpy (X) [02/2007 - 05/2016]
- Fiat models: Scudo 2nd Gen [2007 - 2012], Scudo (ZAF 270) [02/2007 - 07/2016]
- Peugeot models: 207 [2006 - 2014], 208 [2012 >], 307 [2001 - 2008], 308 (1st GEN) T7 [2008 - 2013], 407 [2004 - 2011], 607 [2000 - 2009], 807 [2002 - 2011], 5008 [2009 - 2016], 508 (1st Gen) [2010 - 2018], 3008 (1st GEN) [2009 - 2016], Partner 1 [2002 - 2013], Partner II [2008 - 2018], Expert Mk II [2007 - 2016], Expert Mk III (Traveller) [2016 >], RCZ Coupe [2010 - 2015]
- Toyota models: ProAce [2013 - 2016], ProAce [2016 >]
- Connection: 40-pin PSA Quadlock connector
- Outputs: Ignition +12 V, up to 1.5 A; illumination +12 V, up to 0.1 A; reverse +12 V, up to 1.5 A
- Required cable: Dedicated radio connection cable
- Vehicle settings: Supported via the steering wheel controls
- Vehicles with ECO mode: Permanent +12 V supply to terminal 30, protected by a battery fuse
- DIP switch position: Must be checked
- Type
- Steering Wheel Controls Adapter
- Compatible Car
- Citroen, Fiat, Peugeot
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.