Skroutz.mt

Blam Car Speaker R80 3" with 25W RMS (Midrange)
Car Speakers

Blam Car Speaker R80 3" with 25W RMS (Midrange)

Composition

  • R80 MEDIUM SPEAKER 80 MM (3”)
  • Maximum power 100 W – Nominal power 25 W*
  • Frequency response 150 Hz – 23 kHz
  • Sensitivity 86 dB – Impedance 3 Ω
  • Mounting depth 45.5 mm (1.8″)
  • Composite basket...

Composition

  • R80 MEDIUM SPEAKER 80 MM (3”)
  • Maximum power 100 W – Nominal power 25 W*
  • Frequency response 150 Hz – 23 kHz
  • Sensitivity 86 dB – Impedance 3 Ω
  • Mounting depth 45.5 mm (1.8″)
  • Composite basket reinforced with fiberglass – High-quality processed cellulose diaphragm – Butyl rubber surround – Long-lasting "Conex" damper – 20 mm (0.8”) voice coil with...
See full description See full description

  • RMS Power

    The actual power at which the speakers can operate for an extended period of time. Usually, the higher this value, the louder and clearer the music sounds.

  • Resistance

     The resistance of a speaker, measured in Ohms, indicates how easily electric current flows through it and affects how much power it can receive from the amplifier, contributing to the safe and proper operation of the audio system.

  • Maximum Power

    The maximum power indicates the highest amount of energy a speaker can handle without being damaged. The higher this value, the louder the sound can be. At the same time, the power provided by the amplifier or audio system should be matched to the speaker's limits to ensure safe operation.
  • See all
The product is not available for shipping to the selected country.
Review the product
Product report

Description

Description

Composition

  • R80 MEDIUM SPEAKER 80 MM (3”)
  • Maximum power 100 W – Nominal power 25 W*
  • Frequency response 150 Hz – 23 kHz
  • Sensitivity 86 dB – Impedance 3 Ω
  • Mounting depth 45.5 mm (1.8″)
  • Composite basket reinforced with fiberglass – High-quality processed cellulose diaphragm – Butyl rubber surround – Long-lasting "Conex" damper – 20 mm (0.8”) voice coil with fiberglass coating – Ferrite magnet 55 mm x 10 mm (2.1” x 0.4”)
  • The minimum recommended crossover frequency is 25 W RMS if filtered above 300 Hz 12 dB/octave

MORE INFORMATION

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Dimensions

Type
Midrange

Type

Midrange

Speakers suitable for reproducing midrange frequencies of sound. Ideal for enhancing human voices and mid-tone music.
Shape
Round
Round Speakers Diameter
3 "

Technical Specifications

Peak Power
100 W

Peak Power

The maximum power indicates the highest amount of energy a speaker can handle without being damaged. The higher this value, the louder the sound can be. At the same time, the power provided by the amplifier or audio system should be matched to the speaker's limits to ensure safe operation.
Power (RMS)
25 W

Power (RMS)

The actual power at which the speakers can operate for an extended period of time. Usually, the higher this value, the louder and clearer the music sounds.
Nominal Impendance
3 ohm

Nominal Impendance

 The resistance of a speaker, measured in Ohms, indicates how easily electric current flows through it and affects how much power it can receive from the amplifier, contributing to the safe and proper operation of the audio system.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

Composition

  • R80 MEDIUM SPEAKER 80 MM (3”)
  • Maximum power 100 W – Nominal power 25 W*
  • Frequency response 150 Hz – 23 kHz
  • Sensitivity 86 dB – Impedance 3 Ω
  • Mounting depth 45.5 mm (1.8″)
  • Composite basket reinforced with fiberglass – High-quality processed cellulose diaphragm – Butyl rubber surround – Long-lasting "Conex" damper – 20 mm (0.8”) voice coil with fiberglass coating – Ferrite magnet 55 mm x 10 mm (2.1” x 0.4”)
  • The minimum recommended crossover frequency is 25 W RMS if filtered above 300 Hz 12 dB/octave

MORE INFORMATION

Manufacturer

Manufacturer Details

Warnings & Safety Information

Dimensions

Type
Midrange

Type

Midrange

Speakers suitable for reproducing midrange frequencies of sound. Ideal for enhancing human voices and mid-tone music.
Shape
Round
Round Speakers Diameter
3 "

Technical Specifications

Peak Power
100 W

Peak Power

The maximum power indicates the highest amount of energy a speaker can handle without being damaged. The higher this value, the louder the sound can be. At the same time, the power provided by the amplifier or audio system should be matched to the speaker's limits to ensure safe operation.
Power (RMS)
25 W

Power (RMS)

The actual power at which the speakers can operate for an extended period of time. Usually, the higher this value, the louder and clearer the music sounds.
Nominal Impendance
3 ohm

Nominal Impendance

 The resistance of a speaker, measured in Ohms, indicates how easily electric current flows through it and affects how much power it can receive from the amplifier, contributing to the safe and proper operation of the audio system.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.