Skroutz.mt

Pedrollo PKm 200 Electric Surface Water Pump 2hp Single-Phase
Surface Water Pumps

Pedrollo PKm 200 Electric Surface Water Pump 2hp Single-Phase Code: 41PM9217A1

Suitable for use with clean water, free of chemicals and corrosive elements that may affect the materials used in the construction of the pump. Due to its easy, economical, and reliable use, it is...

Suitable for use with clean water, free of chemicals and corrosive elements that may affect the materials used in the construction of the pump. Due to its easy, economical, and reliable use, it is ideal for domestic use, whether with small pressure tanks or for irrigation. Installation should be done in well-ventilated areas, protected from extreme weather...

See full description See full description

Top specs

  • Power Supply

    Electric

    Ideal for continuous and demanding operation (e.g. for a flooded field and/or basement) 2. More economical consumption than gasoline-powered pumps 3. More environmentally friendly
  • Voltage Single-Phase

  • Manometric Height

    This is the distance from the suction point to the maximum height that the water reaches (For example, for a height of 10 meters of water, a pressure of 1 bar is required).

  • Pressure

    The unit of measurement for the pressure exerted by the pump on the water (For example, for a height of 10 meters of water, a pressure of 1 bar is required).
  • See all
319 80 €
Delivery by Thu, 24 Sep
80,00 €   shipping cost
Sent from Greece
From jadevertools
Greece
20+ pieces
See Water Pumps on the page of jadevertools

Learn more about invoicing
Review the product
Product report

Description

Description

Suitable for use with clean water, free of chemicals and corrosive elements that may affect the materials used in the construction of the pump. Due to its easy, economical, and reliable use, it is ideal for domestic use, whether with small pressure tanks or for irrigation. Installation should be done in well-ventilated areas, protected from extreme weather conditions.

  • Type: PKm 200
  • Pump Type: Peripheral
  • Power Supply: Electric Current
  • Motor Power (Hp): 2.00
  • Power (hp-Watt): 2Hp-1500Watt
  • Voltage (Volt): 220 Volt/50 Hz
  • Inlet Diameter Φ (Inch-mm): 1"-25mm
  • Outlet Diameter Φ (Inch-mm): 1"-25mm
  • Max Head (M): 90
  • Max Flow Rate (m3/h): 4.8
  • Body Material: Cast Iron
  • Impeller Material: Brass
  • Pumped Liquid Temperature (°C): 60
  • Ambient Temperature (°C): 40
  • Self-Priming (M): No
  • Priming Height (M): 8
  • Net Weight (Kg): 15.9
  • Product Length (cm): 35.60
  • Product Width (cm): 15.20
  • Product Height (cm): 21.20

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Number
41PM9217A1

Main Specifications

Power Source
Electric

Power Source

Electric
Ideal for continuous and demanding operation (e.g. for a flooded field and/or basement) 2. More economical consumption than gasoline-powered pumps 3. More environmentally friendly
Placement
Horizontal
Automatic Suction
No

Automatic Suction

The engine is automatically activated when the water in the tank falls below the lower limit. Similarly, it is deactivated when the tank is filled.
Centrifugal
No

Centrifugal

Pumps with impellers that enhance water flow.
Firefighting
No
Power Type
Single-Phase
Set
No

Technical Specifications

Horsepower
2 hp
Power
1500 W
Manometric Head
90 m

Manometric Head

This is the distance from the suction point to the maximum height that the water reaches (For example, for a height of 10 meters of water, a pressure of 1 bar is required).
Pressure
3.8 bar

Pressure

The unit of measurement for the pressure exerted by the pump on the water (For example, for a height of 10 meters of water, a pressure of 1 bar is required).

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

Suitable for use with clean water, free of chemicals and corrosive elements that may affect the materials used in the construction of the pump. Due to its easy, economical, and reliable use, it is ideal for domestic use, whether with small pressure tanks or for irrigation. Installation should be done in well-ventilated areas, protected from extreme weather conditions.

  • Type: PKm 200
  • Pump Type: Peripheral
  • Power Supply: Electric Current
  • Motor Power (Hp): 2.00
  • Power (hp-Watt): 2Hp-1500Watt
  • Voltage (Volt): 220 Volt/50 Hz
  • Inlet Diameter Φ (Inch-mm): 1"-25mm
  • Outlet Diameter Φ (Inch-mm): 1"-25mm
  • Max Head (M): 90
  • Max Flow Rate (m3/h): 4.8
  • Body Material: Cast Iron
  • Impeller Material: Brass
  • Pumped Liquid Temperature (°C): 60
  • Ambient Temperature (°C): 40
  • Self-Priming (M): No
  • Priming Height (M): 8
  • Net Weight (Kg): 15.9
  • Product Length (cm): 35.60
  • Product Width (cm): 15.20
  • Product Height (cm): 21.20

Manufacturer

Manufacturer Details

Warnings & Safety Information
Product Number
41PM9217A1

Main Specifications

Power Source
Electric

Power Source

Electric
Ideal for continuous and demanding operation (e.g. for a flooded field and/or basement) 2. More economical consumption than gasoline-powered pumps 3. More environmentally friendly
Placement
Horizontal
Automatic Suction
No

Automatic Suction

The engine is automatically activated when the water in the tank falls below the lower limit. Similarly, it is deactivated when the tank is filled.
Centrifugal
No

Centrifugal

Pumps with impellers that enhance water flow.
Firefighting
No
Power Type
Single-Phase
Set
No

Technical Specifications

Horsepower
2 hp
Power
1500 W
Manometric Head
90 m

Manometric Head

This is the distance from the suction point to the maximum height that the water reaches (For example, for a height of 10 meters of water, a pressure of 1 bar is required).
Pressure
3.8 bar

Pressure

The unit of measurement for the pressure exerted by the pump on the water (For example, for a height of 10 meters of water, a pressure of 1 bar is required).

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

319,80 €
80,00 €   shipping cost