The Hikvision DS-3E1106HP-EI switch expands a CCTV system network with four 10/100 Mbps PoE ports and two 100 Mbps RJ45 network ports. It supports IEEE 802.3af/at/bt standards, network topology management, and alarm notifications. The PoE ports feature 6 kV surge protection, while long-distance transmission reaches up to 300 m; in Extend Mode, AF/AT cameras can be connected at distances of up to 300 m.
Port 1 provides up to 60 W, and ports 2–4 provide up to 30 W per port, with a total PoE power budget of 60 W. The metal enclosure is rated IP40, and the switch can be mounted on a wall or placed on a desk. Management features include speed and flow control settings, remote upgrades, factory reset, log viewing, and basic network settings.
- PoE ports: 4 × 100 Mbps RJ45
- Network ports: 2 × 100 Mbps RJ45
- PoE standards: IEEE 802.3af, IEEE 802.3at, IEEE 802.3bt
- Power per port: Port 1: 60 W, ports 2–4: 30 W
- Total PoE power: 60 W
- PoE port protection: 6 kV surge protection
- Maximum transmission distance: Up to 300 m
- Forwarding mode: Store-and-forward
- MAC address table: 2 K
- Switching capacity: 1.2 Gbps
- Packet forwarding rate: 0.8928 Mpps
- Internal cache: 768 Kbits
- Enclosure material: Metal
- Protection rating: IP40
- Installation: Wall- or desk-mounted
- Dimensions: 145 × 25.6 × 68.45 mm
- Weight: 0.245 kg
- Operating temperature: -10 °C to 55 °C
- Operating humidity: 5% to 95%, non-condensing
- Power supply: 48 V DC, 1.35 A
- Maximum power consumption: 65 W
- Idle power consumption: 2 W
- Package contents: Switch, power adapter, AC power cord, quick start guide
- Type
- Switch
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.