Ready-to-use, non-shrinking floor mortar with normal setting and rapid drying. Premixed mortar made from special hydraulic binding material and graded aggregates with normal setting, quick hardening, and controlled shrinkage. Ideal for internal and external applications in floor fill layers before the final covering is installed.

• Excellent weather resistance.
• Quick foot traffic (approximately 12 hours after).
• Fast covering with ceramic tiles (24 hours), full drying in 4 days for the installation of wooden and elastic floors.
• Smooth final surface finish.
• Ideal for rapid leveling of new and old floors.
• High mechanical strengths.
• Suitable for underfloor heating.
• High adhesion to concrete.
• Suitable for outdoor and indoor use.

Usage: Internal and external floating and bonded cement screeds on old and new floor slabs for any type of floor covering where rapid drying is required.

Technical Characteristics:

• Form: Cement-based mortar.
• Color: Gray.
• Fresh mortar density: 2.00 Kg/Lt.
• Consumption: 18-20 Kg/m2 /cm thickness.
• Dry mortar density: 1.70 Kg/Lt.
• Water demand: 2.5 Lt/25 Kg.
• Container lifespan: approximately 60 minutes.
• Temperature resistance: from -30 °C to +90 °C.
• Compressive strength: > 30 N/mm2 after 28 days.
• Bending strength: > 6 N/mm2 after 28 days.

Substrate preparation: It can be used on any substrate as long as it is not subject to rising moisture. If the substrate is subject to rising moisture, use a waterproofing membrane before applying the cement screed.

Mix preparation: Mix one 25 Kg bag in 2.5 Lt of water until a homogeneous mixture is achieved. The amount of water should not be altered.