Berling DECO CIRE is a ready-to-use, paste-like microcement for horizontal and vertical surfaces, with the smooth appearance of traditional Cycladic plaster. It can be applied to floors, walls, stairs, built-in features, bathrooms, as well as wooden furniture and tables, indoors and outdoors when used with the appropriate system. It protects surfaces from everyday use and from weather-related and mechanical stress.
The mortar must not be diluted. Before use, mix it with liquid component B. It is water-repellent, highly elastic, and its film is protected against fungi. The recommended application system for underfloor-heated floors is Quartz, DECO CIRE, and PU Varnish.
- Type: Microcement
- Weight: 15 kg
- Form: Ready-to-use paste-like mortar
- Colour: White or very light grey, tintable in a range of shades using the Berling tinting system
- Coverage: 1.5–1.7 kg/m² per mm of thickness
- Touch dry: 2–4 hours
- Through-dry: At least 24 hours
- Recoating: After 24 hours
- Fully cured: At least 4 days
- Volatile organic compounds: Up to 30 g/L
- Preparation: Add liquid component B in the manufacturer’s recommended ratio and mix until fully homogeneous
- Application: Apply 3 coats using a metal or plastic trowel, leaving at least 24 hours between coats
- Substrate preparation: Clean, dry, and stable, with moisture content up to 4% and pH below 9
- Primer: One coat of Quartz bonding primer; on tiles, granite, or marble, first apply Berocyd 111 epoxy with quartz sand or Quartz Tiles
- Floor reinforcement: Alkali-resistant mesh, 70 or 160 g/m², after the first coat; required on surfaces larger than 25 m²
- Expansion joint: Every 25 m² on floors
- Final protection: Force water-based varnish for residential use; PU Varnish for demanding applications after 4 days; or Berocyd 111 epoxy for bathrooms after at least 7 days
- Tool cleaning: With soap and water
- Type
- Cement mortar
- Weight
- 15 kg
- Pressed Cement Mortar
- Yes
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.