Concrete

Isomat Screed-SX 25kg

Isomat Screed-SX screed mortar is a fiber-reinforced, fast-setting mortar that replaces cement in floor screeds. It is mixed with sand and water to produce a high-strength screed suitable for filling...

Isomat Screed-SX screed mortar is a fiber-reinforced, fast-setting mortar that replaces cement in floor screeds. It is mixed with sand and water to produce a high-strength screed suitable for filling and leveling floors before covering them with tiles, marble, natural stone, or parquet. It is also used for sloped screeds on rooftops and in outdoor areas, as...

See Description & Specifications See Description & Specifications
15 10 €
Delivery Mon, 30 Nov - Fri, 04 Dec
74,00 €   shipping cost
Sent from Greece
From Nikolopoulos-bagno 4.7 (58)

Learn more about invoicing

Description & Specifications

Isomat Screed-SX screed mortar is a fiber-reinforced, fast-setting mortar that replaces cement in floor screeds. It is mixed with sand and water to produce a high-strength screed suitable for filling and leveling floors before covering them with tiles, marble, natural stone, or parquet. It is also used for sloped screeds on rooftops and in outdoor areas, as well as for floors with underfloor heating.

It hardens quickly while maintaining a long working time, and it is pumpable. It can be applied as a floating floor or mixed with perlite to produce lightweight concrete.

  • Type: Fiber-reinforced cementitious mortar
  • Packaging: 25 kg bag
  • Color: Grey
  • Application thickness: 20–100 mm
  • Consumption: 2.0–3.5 kg/m² per cm of layer thickness
  • Pot life: 1–2 hours at +20°C
  • Walkability: At least 6 hours after application at 20°C and 50% R.H.
  • Tiling time: Approximately 24 hours, depending on application thickness
  • Parquet installation time: Approximately 2–4 days, depending on the mixing ratio
  • Mixing with sand: 80–100 kg of sand per 20 kg of mortar
  • Water requirement: Approximately 12 l per 20 kg of mortar and 80–100 kg of sand
  • Application temperature: At least +5°C
  • Bulk density of dry mortar: 1.16 ± 0.05 kg/l
  • Compressive strength, 1:4 ratio: 6.0 ± 0.5 N/mm² after 1 day and 18.0 ± 0.5 N/mm² after 28 days
  • Flexural strength, 1:4 ratio: 2.0 ± 0.5 N/mm² after 1 day and 6.0 ± 0.5 N/mm² after 28 days
  • Compressive strength, 1:5 ratio: 2.5 ± 0.5 N/mm² after 1 day and 13.5 ± 0.5 N/mm² after 28 days
  • Flexural strength, 1:5 ratio: 1.0 ± 0.5 N/mm² after 1 day and 4.0 ± 0.5 N/mm² after 28 days
  • Adhesion strength: 1.5 ± 0.3 N/mm² at a 1:4 ratio and 1.0 ± 0.3 N/mm² at a 1:5 ratio

Manufacturer

Type
Cement mortar
Weight
25 kg
Pressed Cement Mortar
-

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

15,10 €
74,00 €   shipping cost