The installation is easy, you place the insert directly on the wall with the adhesive, remove the large screw with the screwdriver, and attach the main body on top of the television. Then you take the television in your hands and attach it to the small inserted piece and screw it back in with the screwdriver. It is necessary to tighten the lever properly to prevent the television from wobbling. You don't have access to the back for the cables after installation, so you either blindly attach them or attach them beforehand. 5 stars due to the price, I can't expect anything more

In the VESA 200*100, there is a slight issue as it allows the TV to lean left or right depending on its weight. However, this problem can be easily solved...

Very good base. If the screws are properly placed on the wall, it appears very stable. Of course, you need to place it on top of the television, tighten the screws on the wall sufficiently, and then mount it on the wall. I did not find any other more convenient way because if you remove the central screw afterwards, it is difficult to screw the bracket back with the television obstructing you. Also, the television cannot be screwed onto the wall with the base. So, the only thing left for you to do is what I mentioned earlier. The cables can be easily inserted after installation if you slightly twist the television. You can adjust it by turning it at a small angle, which can also happen by mistake if it is mounted low. I don't know if this is an advantage or a disadvantage!

I have purchased many stands of this particular brand and have been completely satisfied with all of them. Now, regarding this specific stand, it is very stable and has a nice and sturdy construction. The installation is very easy, first you put the small piece that screws into the wall, then you put the piece that screws into the TV, and then you connect them together with the vertical screw - bolt it has. It allows the TV to rotate right - left + - 30 degrees and up - down + - 20 degrees. Now, for those who mention that there is no space for cables, I will mention that I tied up the power strip from behind and gathered all the cables from behind so that nothing is visible.

Very good value for money, I would like it to be a little more stable but the gamble it has with the TV on top helps you to adjust it a bit (turn it right or left) if you haven't hit the exact alignment of the base.

At its price (around €5), it is simply epic! It comfortably holds an old 32-inch television (so it's heavy), has plenty of space at the back for cables, etc. (I wonder why they say it doesn't have), very stable on the wall and the television, good viewing angles. The only negative thing I can find is in the installation, the screws provided for the wall are slightly thicker than the corresponding holes in the base (at least that's how it was for me), but with a little hammering, they fit normally. It might also make it difficult for some to adjust the tilt, it is easier if done by two people. A purchase with closed eyes

If you follow the process according to the instructions, everything is easy. A little more force is needed on the screw.

Apart from the fact that you don't have easy access to the cables once you install it on the wall, it is the best and safest solution for your television

Very sturdy construction, maybe even more than my TV, easy installation for someone who has held a screwdriver, also gives a slight tilt up and down left right, finally its price is low for this product.

Value for money is unquestionable, easy installation, cable management is relatively easy, installation is very easy if you follow the instructions accurately.

Very good base for 6€ (and more). I have 2 of these for months, in one I put a 23-inch screen, which although it didn't have holes for a base, I did it myself and it fit perfectly without any problem, it holds it with just one hole in the wall, I didn't need more. In the second one, I put a 43-inch 4K and even though I was afraid because it says up to 42 inches, I thought it couldn't hold so much weight, several months have passed and it's fine. It is incredibly convenient that you can move it right and left, as well as the tilts it takes. As for the "falling off" that someone wrote, it's not true because after you place it, you can tighten it more and the base won't move from the wall, only the side that holds the screen will move. Plus, even if it's tightened, someone has to lift the screen upwards to remove it. Obviously, I didn't expect it to have cable management, but I had to rate it. Access to the connections depends on the screen. It is convenient in one, not in the other.

It offers horizontal and vertical tilt at the maximum possible degrees (until the TV finds the wall). It has room for the TV to level itself after being securely mounted on the wall by manually shaking it. It offers multiple VESA options. HOWEVER, I deduct 1 star because the base is mounted in a sliding manner - with upward movement - on the screws that are screwed into the wall (look at the shape of the holes on the surface that touches the wall and you will understand). This means that if someone unsuspectingly pushes the TV upwards, the base will come off the screws (like frames) and fall down with the TV!!! There is NO KIND of safety pin or lock that secures the base! To prevent an accidental movement that could be damaging, I suggest that after first mounting the base on the screws on the wall (according to the installation instructions), tighten them even more with a 10mm wrench (and of course, inform anyone approaching it not to lift it for any reason).

The stand is excellent with many different screws + a screwdriver.

However, it does not fit the specific Samsung UE28J4100 TV. It had screws (correct width) but they were not the right length. I had to buy longer screws to secure the TV.

I have it for 4 months.
It is a reliable support base. It has 2 degrees of freedom (up and down, right and left).
Easy installation and sturdy construction.

Very good for its price. It also has vertical tilt in addition to horizontal.
Be careful as it protrudes quite a bit from the wall. It doesn't bother me where I installed it, but some people might be bothered.
I highly recommend it without reservation.