Liquid Frost

This saline solution creates a whitish crystalline structure that simulates the effect of frost. Due to its natural composition, certain external factors such as humidity, temperature, and the surface or structure where it is applied can affect the formation of frost.

It can mimic frost on:

• trees
• shrubs
• flowers
• crystals
• other crystalline formations

Apply multiple layers and allow to dry between 4 to 24 hours. Subsequent applications may reactivate the crystallization process and cause them to grow. It can be cleaned with water if necessary. Results may vary depending on whether applied with a brush or an airbrush. When airbrushing, it is recommended not to apply too thin layers, as crystals will not form.

Warning:

• The use of other products over the frozen frost, such as paint, varnish, or lacquer may affect the crystals.
• Once crystallized, if moistened, they could melt or simply weaken the crystals.
• Depending on the product used, they can crystallize again.
• Porous materials, such as natural wood, MDF, cork, cardboard, etc., can absorb the product medium, negating the effect of the liquid frost. These materials should be sealed prior to applying the liquid frost.
• To increase the hardness of the crystals, you can use liquid cyanoacrylate glue and apply via capillary action. By doing this, some crystals may lose detail if not well-formed or adhered.
• Using excessive glue may release cyanoacrylate fumes.
• If you want to paint the crystals, it should always be done via capillary action, and it is recommended to secure them beforehand to affect their structure as little as possible.

Contains 17ml.